root/platform/a490/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - a490 - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the a490 camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_PROPSET                     3
  24     #define CAM_DRYOS                       1
  25     #define CAM_DRYOS_2_3_R39               1
  26 
  27     #define CAM_RAW_ROWPIX                  3720
  28     #define CAM_RAW_ROWS                    2772
  29 
  30     #undef  CAM_USE_ZOOM_FOR_MF
  31     #undef  CAM_HAS_ERASE_BUTTON
  32     #undef  CAM_HAS_DISP_BUTTON                     // Camera does not have DISP button
  33     #undef  CAM_HAS_IRIS_DIAPHRAGM
  34     #define CAM_SHOW_OSD_IN_SHOOT_MENU      1
  35     #define CAM_HAS_ND_FILTER               1
  36     #undef  CAM_HAS_MANUAL_FOCUS
  37     #undef  CAM_HAS_USER_TV_MODES
  38     #undef  CAM_HAS_IS
  39     #define CAM_MULTIPART                   1
  40     #undef  CAM_VIDEO_CONTROL
  41     #define CAM_REAR_CURTAIN                1
  42     #undef  DEFAULT_RAW_EXT
  43     #define DEFAULT_RAW_EXT                 2   // use .CR2
  44     #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
  45     #define CAM_CAN_MUTE_MICROPHONE         1
  46     #define CAM_EV_IN_VIDEO                 1
  47 
  48     #undef CAM_DEFAULT_ALT_BUTTON
  49     #define CAM_DEFAULT_ALT_BUTTON          KEY_PLAYBACK
  50 
  51     #define CAM_DNG_LENS_INFO               { 66,10, 216,10, 30,10, 58,10 } // See comments in camera.h
  52     // pattern
  53     #define cam_CFAPattern                  0x02010100 // Red  Green  Green  Blue
  54     // color
  55 
  56     #define CAM_COLORMATRIX1                               \
  57       827547, 1000000, -290458, 1000000, -126086, 1000000, \
  58      -12829,  1000000, 530507,  1000000, 50537,   1000000, \
  59       5181,   1000000, 48183,   1000000, 245014,  1000000
  60 
  61     #define cam_CalibrationIlluminant1      1   // Daylight
  62     // cropping
  63     #define CAM_JPEG_WIDTH                  3648
  64     #define CAM_JPEG_HEIGHT                 2736
  65     #define CAM_ACTIVE_AREA_X1              6
  66     #define CAM_ACTIVE_AREA_Y1              12
  67     #define CAM_ACTIVE_AREA_X2              3690
  68     #define CAM_ACTIVE_AREA_Y2              2772
  69 
  70     // camera name
  71     #define PARAM_CAMERA_NAME               4   // parameter number for GetParameterData to get camera name
  72     #undef  CAM_SENSOR_BITS_PER_PIXEL
  73     #define CAM_SENSOR_BITS_PER_PIXEL       12
  74 
  75     #define CAM_DATE_FOLDER_NAMING           0x100 //Value found in the last function, which is called in GetImageFolder. (first compare)
  76 
  77     #define CAM_HAS_FILEWRITETASK_HOOK       1
  78     #define CAM_FILEWRITETASK_MULTIPASS      1
  79 
  80     #define CAM_NEED_SET_ZOOM_DELAY          150  // Define to add a delay after setting the zoom position
  81     #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS  1    // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
  82     #define CAM_USE_ALT_SET_ZOOM_POINT       1    // Define to use the alternate code in lens_set_zoom_point()
  83     #define CAM_USE_ALT_PT_MoveOpticalZoomAt 1    // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
  84 
  85 //    #define REMOTE_SYNC_STATUS_LED     0xC0xxyyyy        // specifies an LED that turns on while camera waits for USB remote to sync
  86 
  87     #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1   // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
  88                                                 // Used to enabled bracketing in custom timer, required on many recent cameras
  89                                                 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
  90 
  91     #define CAM_SD_OVER_IN_AF               1
  92     #define CAM_SD_OVER_IN_AFL              1
  93     #define CAM_SD_OVER_IN_MF               1
  94 
  95     #define CAM_IS_VID_REC_WORKS            1   // is_video_recording() function works    
  96 
  97     #define CAM_QUALITY_OVERRIDE            1   // https://chdk.setepontos.com/index.php?topic=13342
  98 
  99 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */