root/platform/d30/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - D30 - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the D30 camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_DRYOS                       1
  24     #define CAM_PROPSET                     5
  25 
  26     #define CAM_DRYOS_2_3_R39               1       // Defined for cameras with DryOS version R39 or higher
  27     #define CAM_DRYOS_2_3_R47               1       // Defined for cameras with DryOS version R47 or higher
  28 
  29     #define CAM_RAW_ROWPIX                  4168    // Found @0xff1469c4  d20
  30     #define CAM_RAW_ROWS                    3060    // Found @0xff1469d0  d20
  31 
  32     #undef  CAM_UNCACHED_BIT
  33     #define CAM_UNCACHED_BIT                0x40000000
  34 
  35     #define CAM_JPEG_WIDTH                  4000
  36     #define CAM_JPEG_HEIGHT                 3000
  37     #define CAM_ACTIVE_AREA_X1              92          // to image data, border extends to 120
  38     #define CAM_ACTIVE_AREA_Y1              16      // to image data, border extends to 34
  39     #define CAM_ACTIVE_AREA_X2              4164    // last image data, border at 4136
  40     #define CAM_ACTIVE_AREA_Y2              3060    // image data extends to bottom, border starts 3042?
  41 
  42     #define CAM_DNG_LENS_INFO               { 50,10, 250,10, 39,10, 48,10 } // See comments in camera.h
  43 
  44     #undef  CAM_SENSOR_BITS_PER_PIXEL
  45     #define CAM_SENSOR_BITS_PER_PIXEL          12
  46 
  47     #define cam_CFAPattern             0x02010100 // [Red Green Green Blue]
  48 
  49     #define CAM_COLORMATRIX1                             \
  50     827547, 1000000, -290458, 1000000, -126086, 1000000, \
  51     -12829, 1000000,  530507, 1000000,   50537, 1000000, \
  52       5181, 1000000,   48183, 1000000,  245014, 1000000
  53 
  54     #define cam_CalibrationIlluminant1          1   // Daylight
  55 
  56     #undef  CAM_USES_ASPECT_CORRECTION
  57     #define CAM_USES_ASPECT_CORRECTION          1   //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
  58     #undef  CAM_BITMAP_WIDTH
  59     #undef  CAM_BITMAP_HEIGHT
  60     #define CAM_BITMAP_WIDTH                  960   // Actual width of bitmap screen in bytes
  61     #define CAM_BITMAP_HEIGHT                 270   // Actual height of bitmap screen in rows
  62     #undef  EDGE_HMARGIN
  63     #define EDGE_HMARGIN                       10
  64 
  65     #define CAM_HAS_FILEWRITETASK_HOOK          1
  66     #define CAM_FILEWRITETASK_SEEKS             1
  67 
  68     #define CAM_ZEBRA_NOBUF                     1
  69 
  70     #define PARAM_CAMERA_NAME                   4   // parameter number for GetParameterData
  71 
  72     #define CAM_HAS_ND_FILTER                   1
  73     
  74     #define CAM_EXT_TV_RANGE                    1
  75 
  76     #define CAM_HAS_VIDEO_BUTTON                1
  77     #undef  CAM_VIDEO_CONTROL
  78     #define CAM_VIDEO_QUALITY_ONLY              1
  79 
  80     #undef  CAM_HAS_IRIS_DIAPHRAGM
  81     #undef  CAM_HAS_ERASE_BUTTON
  82     #undef  CAM_HAS_IS                              // Camera does not have an image stabilizer
  83     #undef  CAM_HAS_MANUAL_FOCUS
  84 
  85     #define CAM_HAS_GPS                         1
  86 
  87     #define CAM_HAS_MOVIE_DIGEST_MODE           1
  88 
  89     #define CAM_LOAD_CUSTOM_COLORS              1   // Enable loading CHDK colors into the camera palette memory/hardware
  90 
  91     #undef  CAM_DEFAULT_ALT_BUTTON
  92     #define CAM_DEFAULT_ALT_BUTTON              KEY_PLAYBACK
  93     #undef  CAM_HAS_DISP_BUTTON
  94     #define CAM_DISP_BUTTON_NAME                "Video"
  95     #define SHORTCUT_TOGGLE_RAW                 KEY_VIDEO
  96 
  97     #define CAM_FIRMWARE_MEMINFO                1
  98 
  99 // TO DO
 100     #define CAM_HAS_ZOOM_LEVER                  1    // Camera has dedicated zoom buttons
 101 //    #define CAM_USE_ZOOM_FOR_MF              1    // Zoom lever can be used for manual focus adjustments    
 102     #define CAM_NEED_SET_ZOOM_DELAY           300    // Define to add a delay after setting the zoom position
 103     #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS     1    // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoo
 104     #define CAM_USE_ALT_SET_ZOOM_POINT          1    // Define to use the alternate code in lens_set_zoom_point()
 105     #define CAM_USE_ALT_PT_MoveOpticalZoomAt    1    // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
 106 
 107     #define CAM_QUALITY_OVERRIDE                1
 108     #define CAM_DATE_FOLDER_NAMING              0x400
 109 
 110     #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY   1
 111 
 112     #undef  CAM_USB_EVENTID
 113     #define CAM_USB_EVENTID                 0x202   // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
 114     #define MKDIR_RETURN_ONE_ON_SUCCESS         1   // mkdir() return 1 on success, 0 on fail.
 115 
 116 //      #define REMOTE_SYNC_STATUS_LED  0xC0220130              // TODO specifies an LED that turns on while camera waits for USB remote to sync
 117  
 118     #define CAM_SD_OVER_IN_AF  1
 119     #define CAM_SD_OVER_IN_MF  1
 120 
 121     #define CAM_IS_VID_REC_WORKS                1   // is_video_recording() function works
 122  
 123 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */