1 #ifndef PROPSET10_H 2 #define PROPSET10_H 3 4 // based on propset 7 5 6 /* 7 constants for propset 10 8 Guessed, untested entries are denoted by [m10:untested], they may be completely unusable 9 WARNING: 10 The build uses tools/gen_propset_lua.sed to generate propset10.lua from this file 11 DO NOT USE MULTILINE COMMENTS AROUND DEFINES 12 */ 13 14 #define PROPCASE_AE_LOCK 3 // 0 = AE not locked, 1 = AE locked 15 #define PROPCASE_AF_ASSIST_BEAM 5 // 0=disabled, 1=enabled 16 #define PROPCASE_REAL_FOCUS_MODE 6 // 0 = AF, 1 = Macro, 3 = INF, 4 = MF. Always zero on M cameras 17 #define PROPCASE_AF_FRAME 8 // 1 = one point af, 2 = Face AiAF / Tracking AF 18 #define PROPCASE_AF_LOCK 11 // [m10:untested] 0 = AF not locked, 1 = AF locked (not verified, g7x AF lock just enables MF at current dist) 19 #define PROPCASE_CONTINUOUS_AF 12 // 0 = Continuous AF off, 1 = Continuous AF on (g7x) 20 #define PROPCASE_FOCUS_STATE 18 // 1 AF done 21 // m10 both AV, not verified which does over and which does exif 22 #define PROPCASE_AV2 22 // (philmoz, May 2011) - this value causes overrides to be saved in JPEG and shown on Canon OSD 23 #define PROPCASE_AV 23 // This values causes the actual aperture value to be overriden 24 #define PROPCASE_MIN_AV 28 // M10: 24, 25, 27, 28 (set only after halfshoot) elph180: (27 varies with ND, 24-26=62664) 25 #define PROPCASE_USER_AV 29 // updates instantly when setting aperture on cam with kit lens 26 // no bracketing on m10, propcase assumed to be unchanged 27 #define PROPCASE_BRACKET_MODE 33 // [m10:untested] 0 = 0ff, 1 = exposure, 2 = focus (MF only) (g7x) 28 #define PROPCASE_BV 40 // guessed, but should be this one 29 #define PROPCASE_SHOOTING_MODE 55 // 56 would probably show C as distinct mode but no C mode on M10 30 #define PROPCASE_CUSTOM_SATURATION 62 // [m10:untested] Canon Menu slide bar values: 255, 254, 0, 1, 2 31 #define PROPCASE_QUALITY 64 // [m10:untested] 32 #define PROPCASE_CUSTOM_CONTRAST 66 // [m10:untested] Canon Menu slide bar values: 255, 254, 0, 1, 2 33 #define PROPCASE_LANGUAGE 68 // Upper byte = language (see default.lua for known values) lowest bit: 0 = NTSC, 1 = PAL 34 #define PROPCASE_FLASH_SYNC_CURTAIN 71 // 0 first, 1 second 35 #define PROPCASE_SUBJECT_DIST2 72 // [m10:zero] 36 // TODO M10 has no date stamp option 37 //#define PROPCASE_DATE_STAMP 38 #define PROPCASE_DELTA_SV 86 // [m10:untested] 39 // no digi zoom on m10 40 #define PROPCASE_DIGITAL_ZOOM_MODE 99 // [m10:untested] Digital Zoom Mode/State 0 = off, 1=standard, 2 = 1.5x, 3 = 2.0x 41 // #define PROPCASE_DIGITAL_ZOOM_STATE 42 #define PROPCASE_DIGITAL_ZOOM_POSITION 103 // [m10:untested] also 269? 43 #define PROPCASE_DRIVE_MODE 110 // 0 = single, 1 = cont 44 #define PROPCASE_OVEREXPOSURE 111 // [m10:untested] 45 #define PROPCASE_DISPLAY_MODE 113 46 #define PROPCASE_EV_CORRECTION_1 115 47 #define PROPCASE_FLASH_ADJUST_MODE 129 // [m10:untested] 48 #define PROPCASE_FLASH_FIRE 130 // [m10:untested] 49 #define PROPCASE_FLASH_EXP_COMP 135 // APEX96 units 50 #define PROPCASE_FOCUS_MODE 141 // 0 = auto / af+mf, 1 = MF 51 #define PROPCASE_FLASH_MANUAL_OUTPUT 149 // TODO guessed (ps6 had unsure comments too) 52 #define PROPCASE_FLASH_MODE 151 // 0 = Auto, 1 = ON, 2 = OFF 53 // TODO values changed? 54 #define PROPCASE_IS_MODE 153 // 0 = Continuous, 2 = OFF 55 #define PROPCASE_ISO_MODE 157 56 #define PROPCASE_METERING_MODE 165 // 0 = Evaluative, 1 = Spot, 2 = Center weighted avg 3 partial 57 #define PROPCASE_VIDEO_FRAMERATE 175 // 0=30, 7=60 (g7x) 1 25 58 #define PROPCASE_VIDEO_RESOLUTION 178 // 5=1920x1280, 4=1280x720 2=640x480 (g7x) 59 #define PROPCASE_CUSTOM_BLUE 184 // [m10:untested] Canon Menu slide bar values: 255, 254, 0, 1, 2 60 #define PROPCASE_CUSTOM_GREEN 185 // [m10:untested] ??Canon Menu slide bar values: 255, 254, 0, 1, 2 61 #define PROPCASE_CUSTOM_RED 186 // [m10:untested] Canon Menu slide bar values: 255, 254, 0, 1, 2 62 #define PROPCASE_CUSTOM_SKIN_TONE 187 // [m10:untested] Canon Menu slide bar values: 255, 254, 0, 1, 2 63 #define PROPCASE_MY_COLORS 195 // [m10:untested] 0 = Off, 1 = Vivid, 2 = Neutral, 3 = B/W, 4 = Sepia, 5 = Positive Film, 6 = Lighter Skin Tone, 7 = Darker Skin Tone, 8 = Vivid Red, 9 = Vivid Green, 10 = Vivid Blue, 11 = Custom Color 64 #define PROPCASE_ND_FILTER_STATE 203 // [m10:untested] 0 = out, 1 = in 65 #define PROPCASE_OPTICAL_ZOOM_POSITION 206 // [m10:zero] 66 #define PROPCASE_EXPOSURE_LOCK 217 // Old PROPCASE_SHOOTING value - gets set when set_aelock called or AEL button pressed 67 #define PROPCASE_EV_CORRECTION_2 218 // g7x ok, ps6 +6 68 #define PROPCASE_IS_FLASH_READY 219 // [m10:untested] not certain 69 #define PROPCASE_IMAGE_FORMAT 221 // 0 = RAW, 1 = JPEG, 2 = RAW+JPEG (g7x) 70 #define PROPCASE_RESOLUTION 229 // 0 = L, 2 = M1, 3 = M2, 5 = S 71 #define PROPCASE_ORIENTATION_SENSOR 230 72 #define PROPCASE_TIMER_MODE 234 // 0 = OFF, 1 = 2 sec, 2 = 10 sec, 3 = Custom 73 #define PROPCASE_TIMER_DELAY 235 // timer delay in msec 74 #define PROPCASE_CUSTOM_SHARPNESS 236 // [m10:untested] Canon Menu slide bar values: 255, 254, 0, 1, 2 75 // TODO guessed, no stitch on m10 76 //#define PROPCASE_STITCH_DIRECTION 244 // [m10:untested] 0=left>right, 1=right>left. Some cams have more 77 //#define PROPCASE_STITCH_SEQUENCE 249 // [m10:untested] counts shots in stitch sequence, positive=left>right, negative=right>left 78 #define PROPCASE_SUBJECT_DIST1 256 // [m10:zero] 79 #define PROPCASE_SV_MARKET 257 80 #define PROPCASE_TV2 273 // (philmoz, May 2011) - this value causes overrides to be saved in JPEG and shown on Canon OSD 81 #define PROPCASE_TV 274 // Need to set this value for overrides to work correctly 82 #define PROPCASE_USER_TV 276 // 83 #define PROPCASE_WB_MODE 281 // 0 = Auto, 1 = Daylight, 2 = Shade, 3 = Cloudy, 4 = Tungsten, 5 = Fluorescent, 7 = flash, 11 = under water, 6 = Fluorescent H, 9 = Custom 1, 10 = custom 2 84 #define PROPCASE_WB_ADJ 282 // [m10:untested] 85 #define PROPCASE_SERVO_AF 308 // 0 = Servo AF off, 1 = Servo AF on 86 #define PROPCASE_ASPECT_RATIO 309 // also 404, 0 = 4:3, 1 = 16:9, 2 = 3:2, 3 = 1:1, 4 = 4:5 87 #define PROPCASE_SV 356 // (philmoz, May 2011) - this value causes overrides to be saved in JPEG and shown on Canon OSD 88 // TODO no GPS on M10 89 // #define PROPCASE_GPS 90 #define PROPCASE_REVIEW_TIME 373 // Review time 0 = off, -1 = hold, 100 = quick, otherwise milliseconds 91 #define PROPCASE_TIMER_SHOTS 386 // Number of shots for TIMER_MODE=Custom 92 93 // 94 #define PROPCASE_SHOOTING_STATE 361 // Goes to 1 soon after half press, 2 around when override hook called, 3 after shot start, back to 2 when shoot_full released, back to 0 when half released 95 #define PROPCASE_SHOOTING 1001 // fake, emulated in platform/generic/wrappers.c using SHOOTING_STATE 96 97 #endif