1 #ifndef PROPSET7_H 2 #define PROPSET7_H 3 4 /* 5 constants for propset 7 6 WARNING: 7 The build uses tools/gen_propset_lua.sed to generate propset7.lua from this file 8 DO NOT USE MULTILINE COMMENTS AROUND DEFINES 9 */ 10 11 #define PROPCASE_AE_LOCK 3 // 0 = AE not locked, 1 = AE locked 12 #define PROPCASE_AF_ASSIST_BEAM 5 // 0=disabled, 1=enabled 13 #define PROPCASE_REAL_FOCUS_MODE 6 // 0 = AF, 1 = Macro, 4 = MF (g7x) 14 #define PROPCASE_AF_FRAME 8 // 1 = FlexiZone, 2 = Face AiAF / Tracking AF 15 #define PROPCASE_AF_LOCK 11 // 0 = AF not locked, 1 = AF locked (not verified, g7x AF lock just enables MF at current dist) 16 #define PROPCASE_CONTINUOUS_AF 12 // 0 = Continuous AF off, 1 = Continuous AF on (g7x) 17 #define PROPCASE_FOCUS_STATE 18 // 1 AF done 18 // G7x both AV, not verified which does over and which does exif 19 #define PROPCASE_AV2 22 // (philmoz, May 2011) - this value causes overrides to be saved in JPEG and shown on Canon OSD 20 #define PROPCASE_AV 23 // This values causes the actual aperture value to be overriden 21 // mismatch from propset 6 starts here, +3 22 #define PROPCASE_MIN_AV 28 // 27 is not always min AV. 23 // ps6 +4 24 #define PROPCASE_USER_AV 29 // 30 matches PROPCASE_AV, but doesn't set M/Av mode value 25 #define PROPCASE_BRACKET_MODE 33 // 0 = 0ff, 1 = exposure, 2 = focus (MF only) (g7x) 26 #define PROPCASE_BV 38 27 #define PROPCASE_SHOOTING_MODE 53 // 54 shows C as distinct mode 28 // ps6 +5 29 #define PROPCASE_CUSTOM_SATURATION 60 // Canon Menu slide bar values: 255, 254, 0, 1, 2 30 #define PROPCASE_QUALITY 62 31 #define PROPCASE_CUSTOM_CONTRAST 64 // Canon Menu slide bar values: 255, 254, 0, 1, 2 32 #define PROPCASE_LANGUAGE 66 // Upper byte = language (see default.lua for known values) lowest bit: 0 = NTSC, 1 = PAL 33 #define PROPCASE_FLASH_SYNC_CURTAIN 69 // 0 first, 1 second 34 #define PROPCASE_SUBJECT_DIST2 70 35 // TODO Guessed as ps6 +5, g7x has no date stamp option 36 //#define PROPCASE_DATE_STAMP 71 // 0 = Off, 1 = Date, 2 = Date & Time 37 #define PROPCASE_DELTA_SV 84 // TODO not certain 38 // ps6 + 6 39 // TODO maybe different from older cams (off / standard are different) 40 #define PROPCASE_DIGITAL_ZOOM_MODE 97 // Digital Zoom Mode/State 0 = off, 1=standard, 2 = 1.5x, 3 = 2.0x 41 // TODO does not seem to exist in ps7, combined with _MODE 42 // #define PROPCASE_DIGITAL_ZOOM_STATE 43 #define PROPCASE_DIGITAL_ZOOM_POSITION 101 // also 269? 44 #define PROPCASE_DRIVE_MODE 108 // 0 = single, 1 = cont, 2 = cont AF, 3 = "Auto Drive" 45 #define PROPCASE_OVEREXPOSURE 109 // TODO guessed 46 #define PROPCASE_DISPLAY_MODE 111 47 #define PROPCASE_EV_CORRECTION_1 113 48 #define PROPCASE_FLASH_ADJUST_MODE 127 // TODO ??? guessed ps6 +6 49 #define PROPCASE_FLASH_FIRE 128 // TODO guessed ps6 +6 50 #define PROPCASE_FLASH_EXP_COMP 133 // APEX96 units 51 #define PROPCASE_FOCUS_MODE 139 // 0 = auto, 1 = MF 52 #define PROPCASE_FLASH_MANUAL_OUTPUT 147 // TODO guessed (ps6 had unsure comments too) 53 #define PROPCASE_FLASH_MODE 149 // 0 = Auto, 1 = ON, 2 = OFF 54 // TODO values changed? 55 #define PROPCASE_IS_MODE 151 // 0 = Continuous, 1 = only Shoot, 2 = OFF (399 "dynamic IS" setting?) 56 #define PROPCASE_ISO_MODE 155 57 #define PROPCASE_METERING_MODE 163 // 0 = Evaluative, 1 = Spot, 2 = Center weighted avg 58 #define PROPCASE_VIDEO_FRAMERATE 173 // 0=30, 7=60 (g7x) 59 #define PROPCASE_VIDEO_RESOLUTION 176 // 5=1920x1280, 4=1280x720 2=640x480 (g7x) 60 #define PROPCASE_CUSTOM_BLUE 182 // Canon Menu slide bar values: 255, 254, 0, 1, 2 61 #define PROPCASE_CUSTOM_GREEN 182 // Canon Menu slide bar values: 255, 254, 0, 1, 2 62 #define PROPCASE_CUSTOM_RED 184 // Canon Menu slide bar values: 255, 254, 0, 1, 2 63 #define PROPCASE_CUSTOM_SKIN_TONE 185 // Canon Menu slide bar values: 255, 254, 0, 1, 2 64 #define PROPCASE_MY_COLORS 193 // 0 = Off, 1 = Vivid, 2 = Neutral, 3 = B/W, 4 = Sepia, 5 = Positive Film, 6 = Lighter Skin Tone, 7 = Darker Skin Tone, 8 = Vivid Red, 9 = Vivid Green, 10 = Vivid Blue, 11 = Custom Color 65 #define PROPCASE_ND_FILTER_STATE 201 // 0 = out, 1 = in 66 #define PROPCASE_OPTICAL_ZOOM_POSITION 204 67 #define PROPCASE_EXPOSURE_LOCK 215 // Old PROPCASE_SHOOTING value - gets set when set_aelock called or AEL button pressed 68 #define PROPCASE_EV_CORRECTION_2 216 // g7x ok, ps6 +6 69 #define PROPCASE_IS_FLASH_READY 217 // not certain 70 #define PROPCASE_IMAGE_FORMAT 219 // 0 = RAW, 1 = JPEG, 2 = RAW+JPEG (g7x) 71 #define PROPCASE_RESOLUTION 227 // 0 = L, 2 = M1, 3 = M2, 5 = S 72 #define PROPCASE_ORIENTATION_SENSOR 228 73 #define PROPCASE_TIMER_MODE 232 // 0 = OFF, 1 = 2 sec, 2 = 10 sec, 3 = Custom 74 #define PROPCASE_TIMER_DELAY 233 // timer delay in msec 75 #define PROPCASE_CUSTOM_SHARPNESS 234 // Canon Menu slide bar values: 255, 254, 0, 1, 2 76 // TODO guessed propset 6 +6, stitch not present on g7x 77 //#define PROPCASE_STITCH_DIRECTION 242 // 0=left>right, 1=right>left. Some cams have more 78 //#define PROPCASE_STITCH_SEQUENCE 247 // counts shots in stitch sequence, positive=left>right, negative=right>left 79 // g7x OK propset 6 +6 80 #define PROPCASE_SUBJECT_DIST1 254 // 262 MF value? 81 #define PROPCASE_SV_MARKET 255 82 // ps6 + 7, TV vs TV2 not verified 83 #define PROPCASE_TV2 271 // (philmoz, May 2011) - this value causes overrides to be saved in JPEG and shown on Canon OSD 84 #define PROPCASE_TV 272 // Need to set this value for overrides to work correctly 85 #define PROPCASE_USER_TV 274 86 // ps6 + 8, TODO note values changed from ps6 87 #define PROPCASE_WB_MODE 279 // 0 = Auto, 1 = Daylight, 2 = Shade, 3 = Cloudy, 4 = Tungsten, 5 = Fluorescent, 7 = flash, 11 = under water, 6 = Fluorescent H, 9 = Custom 1, 10 = custom 2 88 #define PROPCASE_WB_ADJ 280 89 #define PROPCASE_SERVO_AF 306 // 0 = Servo AF off, 1 = Servo AF on 90 #define PROPCASE_ASPECT_RATIO 307 // 0 = 4:3, 1 = 16:9, 2 = 3:2, 3 = 1:1, 4 = 4:5 91 #define PROPCASE_SV 354 // (philmoz, May 2011) - this value causes overrides to be saved in JPEG and shown on Canon OSD 92 // TODO GPS guessed, ps6 + 8 93 // #define PROPCASE_GPS 365 // (CHDKLover, August 2011) - contains a 272 bytes long structure 94 #define PROPCASE_REVIEW_TIME 371 // Review time 0 = off, -1 = hold, 100 = quick, otherwise milliseconds 95 #define PROPCASE_TIMER_SHOTS 384 // Number of shots for TIMER_MODE=Custom 96 97 // 98 #define PROPCASE_SHOOTING_STATE 359 // Goes to 1 soon after half press, 2 around when override hook called, 3 after shot start, back to 2 when shoot_full released, back to 0 when half released 99 #define PROPCASE_SHOOTING 1001 // fake, emulated by wrapper using SHOOTING_STATE 100 101 #endif