root/platform/sx610hs/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - sx610hs - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the sx610hs camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_PROPSET                     7
  24     #define CAM_DRYOS                       1
  25     #define CAM_DRYOS_2_3_R39               1 // Defined for cameras with DryOS version R39 or higher
  26     #define CAM_DRYOS_2_3_R47               1 // Defined for cameras with DryOS version R47 or higher
  27 
  28 
  29     #define CAM_RAW_ROWPIX                  5344 
  30     #define CAM_RAW_ROWS                    3950 
  31 
  32     #define CAM_JPEG_WIDTH                  5184 //Canon spec.   
  33     #define CAM_JPEG_HEIGHT                 3888    
  34 
  35     #define CAM_ACTIVE_AREA_X1              120     
  36     #define CAM_ACTIVE_AREA_Y1              16      
  37     #define CAM_ACTIVE_AREA_X2              5344 // active all the way to the edge
  38     #define CAM_ACTIVE_AREA_Y2              3950 // active all the way to the bottom
  39 
  40     #undef  CAM_UNCACHED_BIT
  41     #define CAM_UNCACHED_BIT                0x40000000     
  42 
  43     #undef CAM_SENSOR_BITS_PER_PIXEL
  44     #define CAM_SENSOR_BITS_PER_PIXEL       12
  45         
  46         #undef  CAM_HAS_CMOS
  47         #define CAM_HAS_CMOS                    1
  48 
  49     #define CAM_DNG_LENS_INFO               { 45,10, 810, 10, 38,10, 69, 10 } // See comments in camera.h
  50 
  51     #define cam_CFAPattern                  0x02010100 // Red  Green  Green  Blue
  52 
  53 
  54     // TODO C&P from D10
  55     #define CAM_COLORMATRIX1                        \
  56       14052, 10000,   -5229, 10000,   -1156, 10000, \
  57       -1325, 10000,    9420, 10000,    2252, 10000, \
  58        -498, 10000,    1957, 10000,    4116, 10000
  59     #define cam_CalibrationIlluminant1      21      // D65
  60         
  61     #undef  CAM_HAS_IRIS_DIAPHRAGM
  62         #undef  CAM_HAS_DISP_BUTTON
  63     #undef  CAM_USE_ZOOM_FOR_MF
  64     #undef  CAM_HAS_MANUAL_FOCUS
  65         #undef  CAM_HAS_ERASE_BUTTON
  66         
  67         #define CAM_HAS_ND_FILTER                   1
  68 
  69     #define CAM_HAS_VIDEO_BUTTON                1
  70     #define CAM_HAS_MOVIE_DIGEST_MODE           1   // camera doesn't actually have digest mode, this is needed by is_video_recording
  71 //    #define CAM_IS_VID_REC_WORKS                1     // is_video_recording() function works
  72     #undef CAM_IS_VID_REC_WORKS
  73         
  74     #undef  CAM_VIDEO_CONTROL
  75         #undef  CAM_CHDK_HAS_EXT_VIDEO_MENU
  76 
  77 //    #define CAM_AF_SCAN_DURING_VIDEO_RECORD   1
  78 
  79     #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO  // unlocked in canon firmware by default
  80 
  81     // MakeDirectory_Fut not found, using mkdir
  82     #define MKDIR_RETURN_ONE_ON_SUCCESS
  83 
  84     //aspect correction
  85     #undef  CAM_USES_ASPECT_CORRECTION
  86     #define CAM_USES_ASPECT_CORRECTION          1
  87     #undef  CAM_BITMAP_WIDTH
  88     #define CAM_BITMAP_WIDTH                    960   // Actual width of bitmap screen in bytes
  89     #undef  CAM_BITMAP_HEIGHT
  90     #define CAM_BITMAP_HEIGHT                   270   
  91 
  92     #define CAM_ADJUSTABLE_ALT_BUTTON           1
  93 
  94     #define CAM_ALT_BUTTON_NAMES            { "Playback", "Video", "Wifi" }
  95     #define CAM_ALT_BUTTON_OPTIONS          { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI }
  96 
  97     #undef  CAM_USB_EVENTID
  98     #define CAM_USB_EVENTID                     0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
  99 
 100     
 101     #define CAM_DATE_FOLDER_NAMING              0x080    
 102 
 103     #define PARAM_CAMERA_NAME                   3 
 104 
 105     #define CAM_FILE_COUNTER_IS_VAR             1 // file counter is variable file_counter_var in stubs, not a param
 106 
 107 //    #define  CAM_HAS_FILEWRITETASK_HOOK         1 // FileWriteTask hook is available (local file write can be prevented)
 108 //    #define  CAM_FILEWRITETASK_SEEKS            1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50
 109 
 110     #define CAM_NEED_SET_ZOOM_DELAY             500     // Define to add a delay after setting the zoom position
 111     #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS     1       // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
 112     #define CAM_USE_ALT_SET_ZOOM_POINT          1       // Define to use the alternate code in lens_set_zoom_point()
 113     #define CAM_USE_ALT_PT_MoveOpticalZoomAt    1       // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
 114 
 115 //  only non-AF led available
 116 //    #define REMOTE_SYNC_STATUS_LED          0xC022302C  // specifies an LED that turns on while camera waits for USB remote to sync
 117 
 118     #undef CAM_AF_LED
 119     #define CAM_AF_LED                          1
 120 
 121     #undef  CAM_KEY_PRESS_DELAY
 122     #define CAM_KEY_PRESS_DELAY                 60  // delay after a press - Required by zoom_in/zoom_out buttons
 123 
 124 
 125     #define CAM_SD_OVER_IN_AF                   1
 126     #define CAM_SD_OVER_IN_AFL                  1
 127     #define CAM_SD_OVER_IN_MF                   1
 128 
 129     #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY   1
 130         
 131         #define CAM_3ARG_DebugAssert                1
 132     
 133 //----------------------------------------------------------
 134     #undef  CAM_DEFAULT_MENU_CURSOR_BG
 135     #undef  CAM_DEFAULT_MENU_CURSOR_FG
 136     #define CAM_DEFAULT_MENU_CURSOR_BG  IDX_COLOR_RED      // Override menu cursor colors
 137     #define CAM_DEFAULT_MENU_CURSOR_FG  IDX_COLOR_WHITE    // Override menu cursor colors

/* [<][>][^][v][top][bottom][index][help] */