root/platform/ixus40_sd300/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - ixus40_sd300 - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the ixus40_sd300 camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_PROPSET                     1
  24 
  25     #define CAM_RAW_ROWPIX                  2400
  26     #define CAM_RAW_ROWS                    1766
  27 
  28     #undef  CAM_HAS_ERASE_BUTTON
  29     #undef  CAM_HAS_IRIS_DIAPHRAGM
  30     #define CAM_HAS_ND_FILTER               1
  31     #undef  CAM_HAS_MANUAL_FOCUS
  32     #undef  CAM_HAS_USER_TV_MODES
  33     #define CAM_SHOW_OSD_IN_SHOOT_MENU      1
  34     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
  35     #undef  CAM_VIDEO_CONTROL
  36     #define CAM_MIN_ISO_OVERRIDE            50 // crashes when set to a lower value (not flash related)
  37     #undef  CAM_HAS_IS
  38     #define CAM_DRAW_EXPOSITION             1
  39 
  40     #define CAM_DNG_LENS_INFO               { 58,10, 174,10, 28,10, 49,10 } // See comments in camera.h
  41     // pattern
  42     #define cam_CFAPattern                  0x02010100 // Red  Green  Green  Blue
  43     // color
  44     #define CAM_COLORMATRIX1                                \
  45      652674,  1000000, -172074, 1000000, -107575,  1000000, \
  46     -139063,  1000000,  594517, 1000000,   60252,  1000000, \
  47       -9088,  1000000,   82013, 1000000,  238080,  1000000
  48 
  49     #define cam_CalibrationIlluminant1      1       // Daylight
  50     // cropping
  51     #define CAM_JPEG_WIDTH                  2272
  52     #define CAM_JPEG_HEIGHT                 1704
  53     #define CAM_ACTIVE_AREA_X1              12
  54     #define CAM_ACTIVE_AREA_Y1              12
  55     #define CAM_ACTIVE_AREA_X2              2356
  56     #define CAM_ACTIVE_AREA_Y2              1764
  57     // camera name
  58     #define PARAM_CAMERA_NAME               2       // parameter number for GetParameterData
  59     #define CAM_NO_MEMPARTINFO              1       // vxworks function missing
  60     #undef  CAM_FLASHPARAMS_VERSION
  61     #define CAM_FLASHPARAMS_VERSION         2
  62 
  63 //    #define REMOTE_SYNC_STATUS_LED     0xC0xxyyyy        // specifies an LED that turns on while camera waits for USB remote to sync
  64 
  65     // "real" to "market" conversion definitions
  66     #define SV96_MARKET_OFFSET              -10          // market-real sv96 conversion value
  67 
  68     // Conversion values for pow(2,10/96) 'market' to 'real', and pow(2,-10/96) 'real' to 'market'
  69     // Uses integer arithmetic to avoid floating point calculations. Values choses to get as close
  70     // to the desired multiplication factor as possible within normal ISO range.
  71     #define ISO_MARKET_TO_REAL_MULT         17611
  72     #define ISO_MARKET_TO_REAL_SHIFT        14
  73     #define ISO_MARKET_TO_REAL_ROUND        8192
  74     #define ISO_REAL_TO_MARKET_MULT         3811
  75     #define ISO_REAL_TO_MARKET_SHIFT        12
  76     #define ISO_REAL_TO_MARKET_ROUND        2048
  77 
  78     #undef  PARAMETER_DATA_FLAG
  79     #define PARAMETER_DATA_FLAG             0       // For calls to _GetParameterData & _SetParameterData
  80 
  81 //--------------------------------------------------
  82 
  83     #undef  CAM_DEFAULT_MENU_CURSOR_BG
  84     #undef  CAM_DEFAULT_MENU_CURSOR_FG
  85     #define CAM_DEFAULT_MENU_CURSOR_BG  IDX_COLOR_RED      // Override menu cursor colors
  86     #define CAM_DEFAULT_MENU_CURSOR_FG  IDX_COLOR_WHITE    // Override menu cursor colors
  87 
  88     #define CAM_3ARG_DebugAssert                1   // DebugAssert takes 3 arguments
  89 
  90 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */