1 // Camera - ixus115 v2 - platform_camera.h
2
3 // This file contains the various settings values specific to the IXUS115/ELPH100HS camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 4
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1
26 #define CAM_DRYOS_2_3_R47 1
27
28 #define CAM_RAW_ROWPIX 4168
29 #define CAM_RAW_ROWS 3060 // actual size from fw 12754080pix at FF375484 -> 19131120/12*8
30 #undef CAM_UNCACHED_BIT
31 #define CAM_UNCACHED_BIT 0x40000000
32
33 #define CAM_JPEG_WIDTH 4000
34 #define CAM_JPEG_HEIGHT 3000
35 #define CAM_ACTIVE_AREA_X1 92 // note: wide angle shots have a dark border (that area is excluded from vignetting correction)
36 #define CAM_ACTIVE_AREA_Y1 16
37 #define CAM_ACTIVE_AREA_X2 4164
38 #define CAM_ACTIVE_AREA_Y2 3060
39
40 #undef CAM_EMUL_KEYPRESS_DURATION
41 #define CAM_EMUL_KEYPRESS_DURATION 10
42 #undef CAM_USE_ZOOM_FOR_MF
43 #define CAM_BRACKETING 1
44 #undef CAM_VIDEO_CONTROL
45 #define CAM_VIDEO_QUALITY_ONLY 1
46 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
47 #define CAM_HAS_MOVIE_DIGEST_MODE 1
48 //#define CAM_EV_IN_VIDEO 1
49 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
50 #define CAM_QUALITY_OVERRIDE 1
51 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
52
53 // #define CAM_USE_ZOOM_FOR_MF 1 // Zoom lever can be used for manual focus adjustments
54 #define CAM_NEED_SET_ZOOM_DELAY 100 // Define to add a delay after setting the zoom position
55 #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoo
56
57 #define CAM_HAS_CMOS 1
58 #define CAM_HAS_ND_FILTER 1
59 #undef CAM_HAS_MANUAL_FOCUS
60 #undef CAM_HAS_IRIS_DIAPHRAGM
61
62 #undef CAM_HAS_ERASE_BUTTON
63 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1
64 #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av.
65 #undef CAM_KEY_PRESS_DELAY
66 #define CAM_KEY_PRESS_DELAY 60 // delay after a press
67 #define CAM_ADJUSTABLE_ALT_BUTTON 1
68 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Set+ZoomIn" }
69 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_SET | KEY_ZOOM_IN }
70 #define CAM_DISP_BUTTON_NAME "Video"
71 #define SHORTCUT_TOGGLE_RAW KEY_VIDEO
72
73 #define CAM_HAS_VIDEO_BUTTON 1
74 #undef DNG_BADPIXEL_VALUE_LIMIT
75 #define DNG_BADPIXEL_VALUE_LIMIT 16 // Camera sensor apparently has bad pixels with value > 0 & <=16
76
77 #define CAM_DNG_LENS_INFO { 50,10, 200,10, 28,10, 59,10 } // See comments in camera.h
78 #define cam_CFAPattern 0x02010100
79
80 #define CAM_COLORMATRIX1 \
81 544808, 1000000, -174047, 1000000, -80399, 1000000, \
82 -75055, 1000000, 440444, 1000000, 11367, 1000000, \
83 -5801, 1000000, 71589, 1000000, 118914, 1000000
84
85 #define cam_CalibrationIlluminant1 1
86
87 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
88 #undef CAM_SENSOR_BITS_PER_PIXEL
89 #define CAM_SENSOR_BITS_PER_PIXEL 12
90 #define CAM_LOAD_CUSTOM_COLORS 1
91
92 #undef CAM_USES_ASPECT_CORRECTION
93 #define CAM_USES_ASPECT_CORRECTION 1
94 #undef CAM_BITMAP_WIDTH
95 #undef CAM_BITMAP_HEIGHT
96 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes
97 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows
98
99 #undef EDGE_HMARGIN
100 #define EDGE_HMARGIN 10
101
102 #define CAM_ZEBRA_NOBUF 1
103
104 #define CAM_QUALITY_OVERRIDE 1
105 #define CAM_DATE_FOLDER_NAMING 0x400
106
107 #define REMOTE_SYNC_STATUS_LED 0xC0220130 // specifies an LED that turns on while camera waits for USB remote to sync
108 #define CAM_REMOTE_HDMI_HPD 1 // Camera supports using HDMI hotplug detect for remote signal
109
110 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
111 // Used to enabled bracketing in custom timer, required on many recent cameras
112 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
113
114 #define CAM_CHDK_HAS_EXT_VIDEO_TIME 1
115
116 #define CAM_SD_OVER_IN_AF 1
117 #define CAM_SD_OVER_IN_AFL 1
118 #define CAM_SD_OVER_IN_MF 1
119
120 //--------------------------------------------------