1 // Camera - A410 - platform_camera.h
2
3 // This file contains the various settings values specific to the A410 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 1
24
25 #define CAM_RAW_ROWPIX 2144 // for 3.34 MP 1/3.2" sensor size
26 #define CAM_RAW_ROWS 1560 // for 3.34 MP 1/3.2" sensor size
27
28 #undef CAM_USE_ZOOM_FOR_MF
29 #undef CAM_HAS_ZOOM_LEVER
30 #define CAM_DRAW_EXPOSITION 1
31 #undef CAM_HAS_ERASE_BUTTON
32 #undef CAM_HAS_IRIS_DIAPHRAGM
33 #define CAM_HAS_ND_FILTER 1
34 #undef CAM_HAS_MANUAL_FOCUS
35 #define CAM_ADJUSTABLE_ALT_BUTTON 1
36 #define CAM_ALT_BUTTON_NAMES { "Print", "Display" }
37 #define CAM_ALT_BUTTON_OPTIONS { KEY_PRINT, KEY_DISPLAY }
38
39 #undef CAM_HAS_USER_TV_MODES
40 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
41 #undef CAM_HAS_IS
42
43 #define CAM_EV_IN_VIDEO 1 //but not very reliable...
44
45 #define CAM_DNG_LENS_INFO { 54,10, 173,10, 28,10, 51,10 } // See comments in camera.h
46
47 // pattern
48 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
49 // color
50 /* #define CAM_COLORMATRIX1 \ //copy from A430
51 479627, 1000000, -156240, 1000000, -84926, 1000000, \
52 -215238, 1000000, 534902, 1000000, 60219, 1000000, \
53 -96906, 1000000, 148194, 1000000, 191583, 1000000
54 */
55 //well, first try, probably not accurate enough (used dng2ps2):
56 #define CAM_COLORMATRIX1 \
57 270041, 1000000, -110546, 1000000, -43914, 1000000, \
58 -121712, 1000000, 256251, 1000000, 12623, 1000000, \
59 -27956, 1000000, 36119, 1000000, 104654, 1000000
60
61 #define cam_CalibrationIlluminant1 1 // Daylight
62 // cropping
63 #define CAM_JPEG_WIDTH 2048
64 #define CAM_JPEG_HEIGHT 1536
65 #define CAM_ACTIVE_AREA_X1 2
66 #define CAM_ACTIVE_AREA_Y1 6
67 #define CAM_ACTIVE_AREA_X2 2090
68 #define CAM_ACTIVE_AREA_Y2 1558
69 // camera name
70 #define PARAM_CAMERA_NAME 3 // parameter number for GetParameterData
71
72 #define CAM_HAS_FILEWRITETASK_HOOK 1
73
74 // #define CAM_MULTIPART 1
75
76 // #define REMOTE_SYNC_STATUS_LED 0xC0xxyyyy // specifies an LED that turns on while camera waits for USB remote to sync
77
78 // "real" to "market" conversion definitions
79 #define SV96_MARKET_OFFSET -4 // market-real sv96 conversion value
80
81 // Conversion values for pow(2,4/96) 'market' to 'real', and pow(2,-4/96) 'real' to 'market'
82 // Uses integer arithmetic to avoid floating point calculations. Values choses to get as close
83 // to the desired multiplication factor as possible within normal ISO range.
84 #define ISO_MARKET_TO_REAL_MULT 8432
85 #define ISO_MARKET_TO_REAL_SHIFT 14
86 #define ISO_MARKET_TO_REAL_ROUND 8192
87 #define ISO_REAL_TO_MARKET_MULT 3979
88 #define ISO_REAL_TO_MARKET_SHIFT 12
89 #define ISO_REAL_TO_MARKET_ROUND 2048
90
91 #define CAM_SD_OVER_IN_AF 1
92 #define CAM_SD_OVER_IN_AFL 1
93 #define CAM_SD_OVER_IN_MF 1
94
95 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
96
97 //--------------------------------------------------
98
99 #undef CAM_DEFAULT_MENU_CURSOR_BG
100 #undef CAM_DEFAULT_MENU_CURSOR_FG
101 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
102 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors