1 // Camera - ixus160_elph160 - platform_camera.h
2
3 // This file contains the various settings values specific to the A2500 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 6
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28 #define CAM_RAW_ROWPIX 5248 // Found @0xff96986c
29 #define CAM_RAW_ROWS 3920 // Found @0xff969874
30
31 #define CAM_JPEG_WIDTH 5152
32 #define CAM_JPEG_HEIGHT 3864
33
34 #define CAM_ACTIVE_AREA_X1 0
35 #define CAM_ACTIVE_AREA_Y1 0
36 #define CAM_ACTIVE_AREA_X2 5192
37 #define CAM_ACTIVE_AREA_Y2 3900
38
39 #undef CAM_UNCACHED_BIT
40 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff826238
41
42 #undef CAM_SENSOR_BITS_PER_PIXEL
43 #define CAM_SENSOR_BITS_PER_PIXEL 12
44
45 #define CAM_DNG_LENS_INFO { 50,10, 400,10, 32,10, 69,10 } // See comments in camera.h
46
47 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
48
49 //TODO
50 #define CAM_COLORMATRIX1 \
51 827547, 1000000, -290458, 1000000, -126086, 1000000, \
52 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
53 5181, 1000000, 48183, 1000000, 245014, 1000000
54 #define cam_CalibrationIlluminant1 1 // Daylight
55
56 #define CAM_DATE_FOLDER_NAMING 0x080 // Found @0xffaab6e4 (pass as 3rd param to GetImageFolder)
57 #define PARAM_CAMERA_NAME 3 // Found @0xffcb1568
58
59 // MakeDirectory_Fut not found, using mkdir
60 #define MKDIR_RETURN_ONE_ON_SUCCESS
61
62 #define CAM_HAS_FILEWRITETASK_HOOK 1 // FileWriteTask hook is available (local file write can be prevented)
63 #define CAM_FILEWRITETASK_SEEKS 1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50
64
65 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
66
67 #undef CAM_USES_ASPECT_CORRECTION
68 #define CAM_USES_ASPECT_CORRECTION 1 // camera uses the modified graphics primitives to map screens an viewports to buffers more sized
69 #undef CAM_BITMAP_WIDTH
70 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
71 #undef CAM_BITMAP_HEIGHT
72 #define CAM_BITMAP_HEIGHT 360
73
74 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
75
76 #define CAM_ADJUSTABLE_ALT_BUTTON 1
77
78 #define CAM_ALT_BUTTON_NAMES { "Playback", "Help" }
79 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_HELP }
80
81 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY
82
83 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1 // For cameras with 'low light' mode that does not work with raw define this
84
85 #define CAM_NEED_SET_ZOOM_DELAY 300 // Define to add a delay after setting the zoom position
86
87 #undef CAM_HAS_ERASE_BUTTON
88 #undef CAM_HAS_DISP_BUTTON
89 #undef CAM_DEFAULT_ALT_BUTTON
90 #define CAM_DEFAULT_ALT_BUTTON KEY_PLAYBACK
91 #define SHORTCUT_TOGGLE_RAW KEY_VIDEO // conflicts with adjustable alt, but not many to choose from
92 #define CAM_HAS_VIDEO_BUTTON 1
93
94 #undef CAM_USB_EVENTID
95 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
96
97 #define CAM_SD_OVER_IN_AF 1
98 #define CAM_SD_OVER_IN_AFL 1
99 #define CAM_SD_OVER_IN_MF 1
100 #undef CAM_HAS_IRIS_DIAPHRAGM
101 #define CAM_HAS_ND_FILTER 1
102
103 #undef CAM_AF_LED
104 #define CAM_AF_LED 1
105
106 #define CAM_3ARG_DebugAssert 1 // DebugAssert takes 3 arguments
107
108 //----------------------------------------------------------