1 // Camera - sx420is - platform_camera.h
2
3 // This file contains the various settings values specific to the sx420is camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 10
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28 #define CAM_RAW_ROWPIX 5248
29 #define CAM_RAW_ROWS 3920
30
31 #define CAM_JPEG_WIDTH 5152
32 #define CAM_JPEG_HEIGHT 3864
33
34 #define CAM_ACTIVE_AREA_X1 8
35 #define CAM_ACTIVE_AREA_Y1 16
36 #define CAM_ACTIVE_AREA_X2 5192
37 #define CAM_ACTIVE_AREA_Y2 3904
38
39 #undef CAM_UNCACHED_BIT
40 #define CAM_UNCACHED_BIT 0x40000000
41
42 #undef CAM_SENSOR_BITS_PER_PIXEL
43 #define CAM_SENSOR_BITS_PER_PIXEL 12
44
45 #define CAM_DNG_LENS_INFO { 43,10, 1806, 10, 35,10, 66,10 } // See comments in camera.h
46
47 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
48
49 // C&P from ixus175
50 #define CAM_COLORMATRIX1 \
51 827547, 1000000, -290458, 1000000, -126086, 1000000, \
52 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
53 5181, 1000000, 48183, 1000000, 245014, 1000000
54 #define cam_CalibrationIlluminant1 1 // Daylight
55
56 #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av (for bracketing).
57
58 #undef CAM_USE_ZOOM_FOR_MF
59 #undef CAM_HAS_MANUAL_FOCUS
60 #undef CAM_HAS_DISP_BUTTON
61
62 #define CAM_HAS_VIDEO_BUTTON 1
63 #define CAM_HAS_MOVIE_DIGEST_MODE 1 // camera doesn't actually have digest mode, this is needed by is_video_recording
64 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
65
66 #undef CAM_VIDEO_CONTROL
67 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
68
69
70 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // unlocked in canon firmware by default
71
72 // MakeDirectory_Fut not found, using mkdir
73 #define MKDIR_RETURN_ONE_ON_SUCCESS
74
75 //aspect correction
76 #undef CAM_USES_ASPECT_CORRECTION
77 #define CAM_USES_ASPECT_CORRECTION 1
78 #undef CAM_BITMAP_WIDTH
79 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
80 #undef CAM_BITMAP_HEIGHT
81 #define CAM_BITMAP_HEIGHT 360
82
83 #define CAM_ADJUSTABLE_ALT_BUTTON 1
84
85 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Wifi" }
86 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI }
87
88
89 #undef CAM_USB_EVENTID
90 #define CAM_USB_EVENTID 0x302 // Levent ID for USB control. Changed in DryOS R58 so needs to be overridable.
91
92
93 #define CAM_DATE_FOLDER_NAMING 0x080
94
95 #define PARAM_CAMERA_NAME 3
96
97 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
98
99 #define CAM_NEED_SET_ZOOM_DELAY 500 // Define to add a delay after setting the zoom position
100
101
102 #undef CAM_AF_LED
103 #define CAM_AF_LED 1
104
105 #undef CAM_KEY_PRESS_DELAY
106 #define CAM_KEY_PRESS_DELAY 60 // delay after a press - Required by zoom_in/zoom_out buttons
107
108 #define CAM_SD_OVER_IN_AFL 1
109 #define CAM_SD_OVER_IN_MF 1
110
111 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1
112
113 #define CAM_3ARG_DebugAssert 1
114
115 #define CAM_HAS_WIFI 1 // Camera has wifi support
116
117 //----------------------------------------------------------
118 #undef CAM_DEFAULT_MENU_CURSOR_BG
119 #undef CAM_DEFAULT_MENU_CURSOR_FG
120 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
121 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors