1 // Camera - sx610hs - platform_camera.h
2
3 // This file contains the various settings values specific to the sx610hs camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 7
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28
29 #define CAM_RAW_ROWPIX 5344
30 #define CAM_RAW_ROWS 3950
31
32 #define CAM_JPEG_WIDTH 5184 //Canon spec.
33 #define CAM_JPEG_HEIGHT 3888
34
35 #define CAM_ACTIVE_AREA_X1 120
36 #define CAM_ACTIVE_AREA_Y1 16
37 #define CAM_ACTIVE_AREA_X2 5344 // active all the way to the edge
38 #define CAM_ACTIVE_AREA_Y2 3950 // active all the way to the bottom
39
40 #undef CAM_UNCACHED_BIT
41 #define CAM_UNCACHED_BIT 0x40000000
42
43 #undef CAM_SENSOR_BITS_PER_PIXEL
44 #define CAM_SENSOR_BITS_PER_PIXEL 12
45
46 #undef CAM_HAS_CMOS
47 #define CAM_HAS_CMOS 1
48
49 #define CAM_DNG_LENS_INFO { 45,10, 810, 10, 38,10, 69, 10 } // See comments in camera.h
50
51 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
52
53
54 // TODO C&P from D10
55 #define CAM_COLORMATRIX1 \
56 14052, 10000, -5229, 10000, -1156, 10000, \
57 -1325, 10000, 9420, 10000, 2252, 10000, \
58 -498, 10000, 1957, 10000, 4116, 10000
59 #define cam_CalibrationIlluminant1 21 // D65
60
61 #undef CAM_HAS_IRIS_DIAPHRAGM
62 #undef CAM_HAS_DISP_BUTTON
63 #undef CAM_USE_ZOOM_FOR_MF
64 #undef CAM_HAS_MANUAL_FOCUS
65 #undef CAM_HAS_ERASE_BUTTON
66
67 #define CAM_HAS_ND_FILTER 1
68
69 #define CAM_HAS_VIDEO_BUTTON 1
70 #define CAM_HAS_MOVIE_DIGEST_MODE 1 // camera doesn't actually have digest mode, this is needed by is_video_recording
71 // #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
72 #undef CAM_IS_VID_REC_WORKS
73
74 #undef CAM_VIDEO_CONTROL
75 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
76
77 // #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
78
79 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // unlocked in canon firmware by default
80
81 // MakeDirectory_Fut not found, using mkdir
82 #define MKDIR_RETURN_ONE_ON_SUCCESS
83
84 //aspect correction
85 #undef CAM_USES_ASPECT_CORRECTION
86 #define CAM_USES_ASPECT_CORRECTION 1
87 #undef CAM_BITMAP_WIDTH
88 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes
89 #undef CAM_BITMAP_HEIGHT
90 #define CAM_BITMAP_HEIGHT 270
91
92 #define CAM_ADJUSTABLE_ALT_BUTTON 1
93
94 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Wifi" }
95 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI }
96
97 #undef CAM_USB_EVENTID
98 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
99
100
101 #define CAM_DATE_FOLDER_NAMING 0x080
102
103 #define PARAM_CAMERA_NAME 3
104
105 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
106
107 #define CAM_HAS_FILEWRITETASK_HOOK 1 // FileWriteTask hook is available (local file write can be prevented)
108 // doesn't appear to use complicated multi pass or seek in normal cases (based on similarity to elph180)
109 // #define CAM_FILEWRITETASK_SEEKS 1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50
110
111 #define CAM_NEED_SET_ZOOM_DELAY 500 // Define to add a delay after setting the zoom position
112
113 // only non-AF led available
114 // #define REMOTE_SYNC_STATUS_LED 0xC022302C // specifies an LED that turns on while camera waits for USB remote to sync
115
116 #undef CAM_AF_LED
117 #define CAM_AF_LED 1
118
119 #undef CAM_KEY_PRESS_DELAY
120 #define CAM_KEY_PRESS_DELAY 60 // delay after a press - Required by zoom_in/zoom_out buttons
121
122
123 #define CAM_SD_OVER_IN_AF 1
124 #define CAM_SD_OVER_IN_AFL 1
125 #define CAM_SD_OVER_IN_MF 1
126
127 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1
128
129 #define CAM_3ARG_DebugAssert 1
130
131 #define CAM_HAS_WIFI 1 // Camera has wifi support
132
133 //----------------------------------------------------------
134 #undef CAM_DEFAULT_MENU_CURSOR_BG
135 #undef CAM_DEFAULT_MENU_CURSOR_FG
136 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
137 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors