1 // Camera - a490 - platform_camera.h
2
3 // This file contains the various settings values specific to the a490 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 3
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1
26
27 #define CAM_RAW_ROWPIX 3720
28 #define CAM_RAW_ROWS 2772
29
30 #undef CAM_USE_ZOOM_FOR_MF
31 #undef CAM_HAS_ERASE_BUTTON
32 //#undef CAM_HAS_DISP_BUTTON
33 #define CAM_DISP_BUTTON_NAME "MODE"
34 #undef CAM_HAS_IRIS_DIAPHRAGM
35 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
36 #define CAM_HAS_ND_FILTER 1
37 #undef CAM_HAS_MANUAL_FOCUS
38 #undef CAM_HAS_USER_TV_MODES
39 #undef CAM_HAS_IS
40 #define CAM_MULTIPART 1
41 #undef CAM_VIDEO_CONTROL
42 #define CAM_REAR_CURTAIN 1
43 #undef DEFAULT_RAW_EXT
44 #define DEFAULT_RAW_EXT 2 // use .CR2
45 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
46 #define CAM_CAN_MUTE_MICROPHONE 1
47 #define CAM_EV_IN_VIDEO 1
48
49 #undef CAM_DEFAULT_ALT_BUTTON
50 #define CAM_DEFAULT_ALT_BUTTON KEY_PLAYBACK
51
52 #define CAM_DNG_LENS_INFO { 66,10, 216,10, 30,10, 58,10 } // See comments in camera.h
53 // pattern
54 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
55 // color
56
57 #define CAM_COLORMATRIX1 \
58 827547, 1000000, -290458, 1000000, -126086, 1000000, \
59 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
60 5181, 1000000, 48183, 1000000, 245014, 1000000
61
62 #define cam_CalibrationIlluminant1 1 // Daylight
63 // cropping
64 #define CAM_JPEG_WIDTH 3648
65 #define CAM_JPEG_HEIGHT 2736
66 #define CAM_ACTIVE_AREA_X1 6
67 #define CAM_ACTIVE_AREA_Y1 12
68 #define CAM_ACTIVE_AREA_X2 3690
69 #define CAM_ACTIVE_AREA_Y2 2772
70
71 // camera name
72 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData to get camera name
73 #undef CAM_SENSOR_BITS_PER_PIXEL
74 #define CAM_SENSOR_BITS_PER_PIXEL 12
75
76 #define CAM_DATE_FOLDER_NAMING 0x100 //Value found in the last function, which is called in GetImageFolder. (first compare)
77
78 #define CAM_HAS_FILEWRITETASK_HOOK 1
79 #define CAM_FILEWRITETASK_MULTIPASS 1
80
81 #define CAM_NEED_SET_ZOOM_DELAY 150 // Define to add a delay after setting the zoom position
82 #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
83 #define CAM_USE_ALT_SET_ZOOM_POINT 1 // Define to use the alternate code in lens_set_zoom_point()
84
85 // #define REMOTE_SYNC_STATUS_LED 0xC0xxyyyy // specifies an LED that turns on while camera waits for USB remote to sync
86
87 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
88 // Used to enabled bracketing in custom timer, required on many recent cameras
89 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
90
91 #define CAM_SD_OVER_IN_AF 1
92 #define CAM_SD_OVER_IN_AFL 1
93 #define CAM_SD_OVER_IN_MF 1
94
95 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
96
97 #define CAM_QUALITY_OVERRIDE 1 // https://chdk.setepontos.com/index.php?topic=13342
98
99 //--------------------------------------------------