1 // Camera - sx1 - platform_camera.h
2
3 // This file contains the various settings values specific to the sx1 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24 #define CAM_DRYOS 1
25
26 #define CAM_RAW_ROWPIX 4152
27 #define CAM_RAW_ROWS 2772
28
29 #define CAM_HAS_CMOS 1
30
31 #define CAM_SWIVEL_SCREEN 1
32 #define CAM_ADJUSTABLE_ALT_BUTTON 1
33 #define CAM_ALT_BUTTON_NAMES { "Shrtcut", "Flash", "Video" }
34 #define CAM_ALT_BUTTON_OPTIONS { KEY_PRINT, KEY_FLASH, KEY_VIDEO }
35 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
36 #define CAM_HAS_VIDEO_BUTTON 1
37 #define CAM_VIDEO_QUALITY_ONLY 1
38 #define CAM_BRACKETING 1
39 #undef CAM_VIDEO_CONTROL
40 #define CAM_MULTIPART 1
41 #define CAM_HAS_JOGDIAL 1
42 #define CAM_HAS_HI_ISO_AUTO_MODE 1
43 #undef CAM_USE_ZOOM_FOR_MF
44 #undef CAM_UNCACHED_BIT // shut up compiler
45 #define CAM_UNCACHED_BIT 0x40000000
46
47 #define CAM_DNG_LENS_INFO { 50,10, 100,10, 28,10, 57,10 } // See comments in camera.h
48 // pattern
49 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
50 // color
51
52 #define CAM_COLORMATRIX1 \
53 827547, 1000000, -290458, 1000000, -126086, 1000000, \
54 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
55 5181, 1000000, 48183, 1000000, 245014, 1000000
56
57 #define cam_CalibrationIlluminant1 1 // Daylight
58 // cropping
59 #define CAM_JPEG_WIDTH 3648
60 #define CAM_JPEG_HEIGHT 2736
61 // original definition, makes active < jpeg. jpeg matches canon specs
62 // #define CAM_ACTIVE_AREA_X1 344
63 // #define CAM_ACTIVE_AREA_Y1 24
64 #define CAM_ACTIVE_AREA_X1 340
65 #define CAM_ACTIVE_AREA_Y1 22
66 // odd values in original definition rounded
67 // #define CAM_ACTIVE_AREA_X2 3991
68 // #define CAM_ACTIVE_AREA_Y2 2759
69 #define CAM_ACTIVE_AREA_X2 3990
70 #define CAM_ACTIVE_AREA_Y2 2758
71 // camera name
72 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
73
74 #undef CAM_SENSOR_BITS_PER_PIXEL
75 #define CAM_SENSOR_BITS_PER_PIXEL 12
76
77 #undef CAM_SCREEN_WIDTH
78 #undef CAM_BITMAP_WIDTH
79 #undef CAM_BITMAP_HEIGHT
80 #define CAM_SCREEN_WIDTH 480 // Width of bitmap screen in CHDK co-ordinates
81 #define CAM_BITMAP_WIDTH 480 // Actual width of bitmap screen in bytes
82 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows
83
84 // #define REMOTE_SYNC_STATUS_LED 0xC0xxyyyy // specifies an LED that turns on while camera waits for USB remote to sync
85
86 #define CAM_HAS_VARIABLE_ASPECT 1
87
88 #define CAM_SD_OVER_IN_AF 1
89 #define CAM_SD_OVER_IN_AFL 1
90 #define CAM_SD_OVER_IN_MF 1
91
92 #define CAM_HAS_CANON_RAW 1 // has native Canon raw
93
94 //--------------------------------------------------
95
96 #undef CAM_DEFAULT_MENU_CURSOR_BG
97 #undef CAM_DEFAULT_MENU_CURSOR_FG
98 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
99 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors