1 // Camera - ixus285_elph360hs - platform_camera.h
2
3 // This file contains the various settings values specific to the ixus285_elph360hs camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 10
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28
29 #define CAM_RAW_ROWPIX 5344
30 #define CAM_RAW_ROWS 3950
31
32 #define CAM_JPEG_WIDTH 5184 //Canon spec.
33 #define CAM_JPEG_HEIGHT 3888
34
35 #define CAM_ACTIVE_AREA_X1 96
36 #define CAM_ACTIVE_AREA_Y1 18
37 #define CAM_ACTIVE_AREA_X2 5344
38 #define CAM_ACTIVE_AREA_Y2 3950
39
40 #undef CAM_UNCACHED_BIT
41 #define CAM_UNCACHED_BIT 0x40000000
42
43 #undef CAM_SENSOR_BITS_PER_PIXEL
44 #define CAM_SENSOR_BITS_PER_PIXEL 12
45
46 #undef CAM_HAS_CMOS
47 #define CAM_HAS_CMOS 1
48
49 #define CAM_DNG_LENS_INFO { 45,10, 540, 10, 36,10, 70, 10 } // See comments in camera.h
50
51 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
52
53
54 // C&P ixus175
55 #define CAM_COLORMATRIX1 \
56 827547, 1000000, -290458, 1000000, -126086, 1000000, \
57 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
58 5181, 1000000, 48183, 1000000, 245014, 1000000
59 #define cam_CalibrationIlluminant1 21 // D65
60
61 #undef CAM_HAS_IRIS_DIAPHRAGM
62 #undef CAM_HAS_DISP_BUTTON
63 #undef CAM_USE_ZOOM_FOR_MF
64 #undef CAM_HAS_MANUAL_FOCUS
65 #undef CAM_HAS_ERASE_BUTTON
66
67 #define CAM_HAS_ND_FILTER 1
68
69 #define CAM_HAS_VIDEO_BUTTON 1
70 #define CAM_HAS_MOVIE_DIGEST_MODE 1 // camera doesn't actually have digest mode, this is needed by is_video_recording
71 // #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
72 #undef CAM_IS_VID_REC_WORKS
73
74 #undef CAM_VIDEO_CONTROL
75 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
76
77 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // unlocked in canon firmware by default
78
79 // MakeDirectory_Fut not found, using mkdir
80 #define MKDIR_RETURN_ONE_ON_SUCCESS
81
82 //aspect correction
83 #undef CAM_USES_ASPECT_CORRECTION
84 #define CAM_USES_ASPECT_CORRECTION 1
85 #undef CAM_BITMAP_WIDTH
86 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes
87 #undef CAM_BITMAP_HEIGHT
88 #define CAM_BITMAP_HEIGHT 270
89
90 #define CAM_ADJUSTABLE_ALT_BUTTON 1
91
92 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Wifi" }
93 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI }
94
95 #undef CAM_USB_EVENTID
96 #define CAM_USB_EVENTID 0x302 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
97
98
99 #define CAM_DATE_FOLDER_NAMING 0x080
100
101 #define PARAM_CAMERA_NAME 3
102
103 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
104
105 #define CAM_NEED_SET_ZOOM_DELAY 500 // Define to add a delay after setting the zoom position
106
107 // only non-AF led available
108 // #define REMOTE_SYNC_STATUS_LED 0xC022302C // specifies an LED that turns on while camera waits for USB remote to sync
109
110 #undef CAM_AF_LED
111 #define CAM_AF_LED 1
112
113 #undef CAM_KEY_PRESS_DELAY
114 #define CAM_KEY_PRESS_DELAY 60 // delay after a press - Required by zoom_in/zoom_out buttons
115
116 #define CAM_SD_OVER_IN_AF 1
117 #define CAM_SD_OVER_IN_AFL 1
118 #define CAM_SD_OVER_IN_MF 1
119
120 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1
121
122 #define CAM_3ARG_DebugAssert 1
123
124 #define CAM_HAS_WIFI 1 // Camera has wifi support
125
126 //----------------------------------------------------------
127 #undef CAM_DEFAULT_MENU_CURSOR_BG
128 #undef CAM_DEFAULT_MENU_CURSOR_FG
129 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
130 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors