1 // Camera - sx530hs - platform_camera.h
2
3 // This file contains the various settings values specific to the sx530hs camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23
24 // propset 8, new for this camera. See development thread https://chdk.setepontos.com/index.php?topic=12418.msg127109#msg127109
25 #define CAM_PROPSET 8
26 #define CAM_DRYOS 1
27 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
28 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
29
30 #undef CAM_CIRCLE_OF_CONFUSION
31 #define CAM_CIRCLE_OF_CONFUSION 6 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
32
33 #define CAM_RAW_ROWPIX 4768 // Found @0xff196e7c
34 #define CAM_RAW_ROWS 3516 // Found @0xff196e88
35
36
37 #define CAM_JPEG_WIDTH 4608 // from canon specs
38 #define CAM_JPEG_HEIGHT 3456
39
40 #define CAM_ACTIVE_AREA_X1 96
41 #define CAM_ACTIVE_AREA_Y1 16
42 #define CAM_ACTIVE_AREA_X2 4768 // active all the way to the edge
43 #define CAM_ACTIVE_AREA_Y2 3516 // active all the way to the bottom
44
45 #undef CAM_UNCACHED_BIT
46 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff025c5c
47
48 #undef CAM_SENSOR_BITS_PER_PIXEL
49 #define CAM_SENSOR_BITS_PER_PIXEL 12
50
51 #define CAM_DNG_LENS_INFO { 43,10, 1806,10, 34,10, 60,10 } // See comments in camera.h
52
53 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
54
55 // TODO C&P from D10
56 #define CAM_COLORMATRIX1 \
57 14052, 10000, -5229, 10000, -1156, 10000, \
58 -1325, 10000, 9420, 10000, 2252, 10000, \
59 -498, 10000, 1957, 10000, 4116, 10000
60 #define cam_CalibrationIlluminant1 21 // D65
61
62 #undef CAM_HAS_CMOS
63 #define CAM_HAS_CMOS 1
64
65 #undef CAM_USE_ZOOM_FOR_MF
66
67 #define CAM_HAS_VIDEO_BUTTON 1
68
69 #undef CAM_HAS_DISP_BUTTON
70
71 // long shutter is actually user TV, may work ?
72 #undef CAM_HAS_USER_TV_MODES
73 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
74
75 #undef CAM_VIDEO_CONTROL
76
77 // #define CAM_VIDEO_QUALITY_ONLY 1
78 #define CAM_HAS_MOVIE_DIGEST_MODE 1 //Camera doesn't actually have MOVIE_DIGEST_MOVIE, but this is required by is_video_recording.
79 //See http://chdk.setepontos.com/index.php?topic=9986.msg118892#msg118892
80 //#define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
81 #undef CAM_IS_VID_REC_WORKS
82
83 // TODO
84 // #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
85 #undef CAM_AF_SCAN_DURING_VIDEO_RECORD
86
87 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // unlocked in canon firmware by default
88
89 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
90
91 // MakeDirectory_Fut not found, using mkdir
92 #define MKDIR_RETURN_ONE_ON_SUCCESS
93
94 //aspect correction
95 #undef CAM_USES_ASPECT_CORRECTION
96 #define CAM_USES_ASPECT_CORRECTION 1
97 #undef CAM_BITMAP_WIDTH
98 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes (may be larger than displayed area)
99 #undef CAM_BITMAP_HEIGHT
100 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows (240 or 270)
101
102
103 #define CAM_HAS_JOGDIAL 1
104 #define CAM_ADJUSTABLE_ALT_BUTTON 1
105 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "DriveMode" }
106 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_DRIVE_MODE }
107
108 // TODO
109 #undef CAM_USB_EVENTID
110 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
111
112 #define CAM_DATE_FOLDER_NAMING 0x080
113
114 #define PARAM_CAMERA_NAME 3 // parameter number for GetParameterData
115
116 #undef CAM_FILE_COUNTER_IS_VAR
117 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
118
119 //#define CAM_HAS_FILEWRITETASK_HOOK 1 // FileWriteTask hook is available (local file write can be prevented)
120 #undef CAM_HAS_FILEWRITETASK_HOOK
121 //#define CAM_FILEWRITETASK_SEEKS 1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50
122 #undef CAM_FILEWRITETASK_SEEKS
123
124 #define CAM_NEED_SET_ZOOM_DELAY 300
125
126 // only non-AF led available
127 // CHDK doesn't currently (April 2016) support REMOTE_SYNC_STATUS_LED on DIGIC 4+ / 5 / 6 cameras
128 // #define REMOTE_SYNC_STATUS_LED 0xC022D1FC // specifies an LED that turns on while camera waits for USB remote to sync
129
130 #undef CAM_AF_LED
131 #define CAM_AF_LED 1
132
133 #undef CAM_KEY_PRESS_DELAY
134 #define CAM_KEY_PRESS_DELAY 120 // delay after a press - Required by zoom_in/zoom_out buttons
135
136 #define SHORTCUT_TOGGLE_ZEBRA KEY_MENU
137
138 #define CAM_SD_OVER_IN_AF 1
139 #define CAM_SD_OVER_IN_AFL 1
140 #define CAM_SD_OVER_IN_MF 1
141
142 #define CAM_MIN_ISO_OVERRIDE 100 // https://chdk.setepontos.com/index.php?topic=12314.msg128518#msg128518
143 #define CAM_MAX_ISO_OVERRIDE 3200 // https://chdk.setepontos.com/index.php?topic=12314.msg128683#msg128683
144
145
146 #undef DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY //jeronymo
147 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1
148
149 #define CAM_3ARG_DebugAssert 1 // DebugAssert takes 3 arguments
150
151 //----------------------------------------------------------
152 #undef CAM_DEFAULT_MENU_CURSOR_BG
153 #undef CAM_DEFAULT_MENU_CURSOR_FG
154 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
155 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors
156
157