1 // Camera - ixus240hs/elph320hs - platform_camera.h
2
3 // This file contains the various settings values specific to the IXUS240/ELPH320HS camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 5
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28 #define CAM_RAW_ROWPIX 4784 // Found @0xff1b1290
29 #define CAM_RAW_ROWS 3516 // Found @0xff1b129c
30 #undef CAM_UNCACHED_BIT
31 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff03b324 ixus240
32
33 #define CAM_JPEG_WIDTH 4680
34 #define CAM_JPEG_HEIGHT 3498
35 #define CAM_ACTIVE_AREA_X1 96
36 #define CAM_ACTIVE_AREA_Y1 18
37 #define CAM_ACTIVE_AREA_X2 4776
38 #define CAM_ACTIVE_AREA_Y2 3516
39
40 #undef CAM_EMUL_KEYPRESS_DURATION
41 #define CAM_EMUL_KEYPRESS_DURATION 10
42 #undef CAM_USE_ZOOM_FOR_MF
43 #define CAM_BRACKETING 1
44 #undef CAM_VIDEO_CONTROL
45 #define CAM_VIDEO_QUALITY_ONLY 1
46 //#define CAM_EV_IN_VIDEO 1
47 //#define CAM_SHOW_OSD_IN_SHOOT_MENU 1
48 //#define CAM_QUALITY_OVERRIDE 1
49
50 #define CAM_HAS_CMOS 1
51 #define CAM_HAS_ND_FILTER 1
52
53 #undef CAM_HAS_ERASE_BUTTON // No erase button
54 #undef CAM_HAS_MANUAL_FOCUS // No manual focus mode
55
56 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
57
58 #undef DEFAULT_RAW_EXT
59 #define DEFAULT_RAW_EXT 2 // use .CR2
60
61 #undef CAM_TS_BUTTON_BORDER
62 #define CAM_TS_BUTTON_BORDER 60 // Define this to leave a border on each side of the palette display. Used on the IXUS 310 to
63 // stop the palette from overlapping the on screen buttons on each side
64 #undef CAM_DISP_ALT_TEXT // Turn off <ALT> at bottom of screen in Alt mode - changes button color instead
65
66 #define CAM_TOUCHSCREEN_UI 1 // Enable touch screen U/I
67
68 // camera name
69 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData - Camera Model name
70 #define PARAM_OWNER_NAME 7 // parameter number for GetParameterData - Owner name
71 #define PARAM_DISPLAY_MODE1 60 // param number for LCD display mode when camera in playback
72 #define PARAM_DISPLAY_MODE2 64 // param number for LCD display mode when camera in record view hold mode
73 #undef CAM_SENSOR_BITS_PER_PIXEL
74 #define CAM_SENSOR_BITS_PER_PIXEL 12
75
76 #undef CAM_USES_ASPECT_CORRECTION
77 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
78 #undef CAM_SCREEN_WIDTH
79 #undef CAM_BITMAP_WIDTH
80 #undef CAM_BITMAP_HEIGHT
81 #define CAM_SCREEN_WIDTH 480 // Width of bitmap screen in CHDK co-ordinates
82 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes (may be larger than displayed area)
83 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows (240 or 270)
84
85 #undef EDGE_HMARGIN
86 #define EDGE_HMARGIN 2
87
88 // bayer sensor pattern
89 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
90
91 #define CAM_DNG_EXPOSURE_BIAS 0,1 // Specify DNG exposure bias value to 0 (to override default of -0.5 in the dng.c code)
92
93 #define CAM_DNG_LENS_INFO { 43,10, 215,10, 27,10, 59,10 } // See comments in camera.h ixus240
94
95 #define cam_CalibrationIlluminant1 1
96 #define CAM_COLORMATRIX1 \
97 544808, 1000000, -174047, 1000000, -80399, 1000000, \
98 -75055, 1000000, 440444, 1000000, 11367, 1000000, \
99 -5801, 1000000, 71589, 1000000, 118914, 1000000 // Look into updating
100
101 #define CAM_ZEBRA_ASPECT_ADJUST 1
102
103 #define CAM_DATE_FOLDER_NAMING 0x400
104
105 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
106 // Used to enabled bracketing in custom timer, required on many recent cameras
107 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
108
109 // #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av in bracketing.
110 #undef CAM_HAS_IRIS_DIAPHRAGM
111
112 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1 // For cameras with 'low light' mode that does not work with raw define this
113 #define CAM_HAS_MOVIE_DIGEST_MODE 1 // Changes the values in the 'movie_status' variable if the camera has this mode
114
115 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
116
117 #undef CAM_USB_EVENTID
118 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
119
120 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
121
122 #define CAM_HAS_FILEWRITETASK_HOOK 1
123 #define CAM_FILEWRITETASK_SEEKS 1
124
125 #define CAM_CHDK_HAS_EXT_VIDEO_TIME 1
126
127 // Warning : SD override for this camera with these values has not been tested
128 #define CAM_CAN_SD_OVERRIDE_UNKNOWN_STATUS 1
129 #define CAM_SD_OVER_IN_AF 1
130 #define CAM_SD_OVER_IN_MF 1
131
132 #define CAM_HAS_WIFI 1 // Camera has wifi support
133
134 //--------------------------------------------------