1 // Camera - sx60hs - platform_camera.h
2
3 // This file contains the various settings values specific to the SX60HS camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22 /*gg
23 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1
24 */
25 // allows CHDK raw exception in sports mode
26 #define CAM_HAS_SPORTS_MODE 1
27
28 #define CAM_AV_OVERRIDE_IRIS_FIX 1
29
30 #undef CAM_KEY_PRESS_DELAY
31 #define CAM_KEY_PRESS_DELAY 60 // delay after a press
32
33 #define CAM_ADJUSTABLE_ALT_BUTTON 1
34 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "WiFi"}
35 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI }
36 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
37
38 // zebra and histo don't currently work, make shortcuts do nothing
39 #define SHORTCUT_TOGGLE_HISTO KEY_DUMMY
40 #define SHORTCUT_TOGGLE_ZEBRA KEY_DUMMY
41
42 #define CAM_SWIVEL_SCREEN 1
43 #define CAM_DRYOS 1
44 #define CAM_DRYOS_2_3_R39 1
45 #define CAM_DRYOS_2_3_R47 1
46 #define CAM_DRYOS_2_3_R55 1
47 #define CAM_PROPSET 8
48
49 #define CAM_RAW_ROWPIX 4768
50 //4608
51 #define CAM_RAW_ROWS 3516
52 //3456
53
54 #define CAM_HAS_CMOS 1
55
56 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
57 #define CAM_HAS_VIDEO_BUTTON 1
58 // #define CAM_VIDEO_QUALITY_ONLY 1
59 #undef CAM_HAS_DISP_BUTTON
60
61 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
62 #undef CAM_VIDEO_CONTROL
63
64 #define CAM_HAS_JOGDIAL 1
65
66 #undef CAM_UNCACHED_BIT
67 #define CAM_UNCACHED_BIT 0x40000000
68
69 #undef CAM_CIRCLE_OF_CONFUSION
70 #define CAM_CIRCLE_OF_CONFUSION 5 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
71
72
73 #define CAM_DNG_LENS_INFO { 38,10,2470,10,34,10,65,10 } // 3.8 - 247 mm, f3.4 - f6.5
74 #define cam_CFAPattern 0x02010100
75
76 #define cam_CalibrationIlluminant1 17
77
78 // from CR2 converted to DNG with adobe DNG converter
79 #define CAM_COLORMATRIX1 \
80 15686, 10000, -8326, 10000, -246, 10000, \
81 -1888, 10000, 10463, 10000, 1645, 10000, \
82 286, 10000, 708, 10000, 6145, 10000
83
84 #define cam_CalibrationIlluminant2 21 // aDobe
85
86 #define CAM_COLORMATRIX2 \
87 13161, 10000, -5451, 10000, -1344, 10000, \
88 -1989, 10000, 10654, 10000, 1531, 10000, \
89 -47, 10000, 1271, 10000, 4955, 10000
90 #define CAM_FORWARDMATRIX1 \
91 3002, 10000, 3390, 10000, 3251, 10000, \
92 1080, 10000, 6247, 10000, 2674, 10000, \
93 341, 10000, 42, 10000, 7868, 10000
94
95 #define CAM_FORWARDMATRIX2 \
96 3678, 10000, 4352, 10000, 1613, 10000, \
97 1429, 10000, 8091, 10000, 480, 10000, \
98 577, 10000, 26, 10000, 7648, 10000
99 #define CAM_JPEG_WIDTH 4608
100 #define CAM_JPEG_HEIGHT 3456
101
102 #define CAM_ACTIVE_AREA_X1 96 //??
103 #define CAM_ACTIVE_AREA_Y1 16 //??
104 #define CAM_ACTIVE_AREA_X2 4760
105 #define CAM_ACTIVE_AREA_Y2 3516
106
107 #define PARAM_CAMERA_NAME 3
108 #define CAM_DATE_FOLDER_NAMING 0x80
109 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
110 #undef CAM_SENSOR_BITS_PER_PIXEL
111 #define CAM_SENSOR_BITS_PER_PIXEL 12
112
113 #define CAM_EXT_TV_RANGE 1
114
115 #define CAM_HAS_ERASE_BUTTON 1
116 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
117
118 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 // Draw pixels on active bitmap buffer only.
119 // #undef CAM_USES_ASPECT_CORRECTION
120 //#define CAM_USES_ASPECT_CORRECTION 1
121 #undef CAM_BITMAP_WIDTH
122 #undef CAM_BITMAP_HEIGHT
123 #undef CAM_SCREEN_WIDTH
124 #undef CAM_SCREEN_HEIGHT
125 //following widths could be 736 and 720
126 #define CAM_BITMAP_WIDTH 640 // Actual width of bitmap screen in <s>bytes</s> pixels
127 #define CAM_BITMAP_HEIGHT 480 // Actual height of bitmap screen in rows
128 #define CAM_SCREEN_WIDTH 640// Width of bitmap screen in CHDK co-ordinates (360 or 480)
129 #define CAM_SCREEN_HEIGHT 480 // Height of bitmap screen in CHDK co-ordinates (always 240 on all cameras so far)
130 #define CAM_SUPPORT_BITMAP_RES_CHANGE 1
131 // #undef CAM_SUPPORT_BITMAP_RES_CHANGE
132
133
134 #undef EDGE_HMARGIN
135 #define EDGE_HMARGIN 10
136
137 #define CAM_HAS_FILEWRITETASK_HOOK 1
138 //#define CAM_FILEWRITETASK_SEEKS 1
139
140 #undef CAM_BITMAP_PALETTE
141 #define CAM_BITMAP_PALETTE 100
142
143 #define CAM_ZEBRA_NOBUF 1
144
145 #define CAM_QUALITY_OVERRIDE 1
146
147 #undef CAMERA_MIN_DIST
148 #define CAMERA_MIN_DIST 100 // Override min subject distance
149 #undef CAMERA_MAX_DIST
150 #define CAMERA_MAX_DIST 1550000 // Override max subject distance; manually checked up to 1550388, with MF max 1369863 (double step)
151
152 #undef CAM_HAS_GPS
153
154 //#define CAM_CHDK_HAS_EXT_VIDEO_TIME 1
155
156 #undef CAM_USB_EVENTID
157 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
158
159 // #define CAM_HAS_MOVIE_DIGEST_MODE 1
160
161 #define CAM_NEED_SET_ZOOM_DELAY 300
162
163 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
164
165
166 #undef REMOTE_SYNC_STATUS_LED
167 // #define REMOTE_SYNC_STATUS_LED 0xC022C30C // TODO specifies an LED that turns on while camera waits for USB remote to sync
168
169 #define CAM_SD_OVER_IN_AF 1
170 #define CAM_SD_OVER_IN_AFL 1
171 #define CAM_SD_OVER_IN_MF 1
172 #undef CAM_AF_LED
173 #define CAM_AF_LED 1
174 #define CAM_SIMPLE_MOVIE_STATUS 1
175 #define CAM_IS_VID_REC_WORKS 1
176 #define CAM_HOTSHOE_OVERRIDE 1
177
178 #define CAM_HAS_CANON_RAW 1 // has native Canon raw
179
180 #define CAM_HAS_WIFI 1 // Camera has wifi support
181
182 //--------------------------------------------------