1 // Camera - sx700hs - platform_camera.h
2
3 // This file contains the various settings values specific to the SX700HS camera. It was copied over from the SX60HS so some settings may be wrong.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 6
24
25 // allows CHDK raw exception in sports mode
26 #define CAM_HAS_SPORTS_MODE 1
27
28 #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av (for bracketing).
29
30 //#define CAM_HAS_ND_FILTER 1 // Camera has built-in ND filter (in addition to iris)
31 #undef CAM_HAS_ND_FILTER
32
33 // #undef CAM_KEY_PRESS_DELAY
34 // #define CAM_KEY_PRESS_DELAY 60 // delay after a press
35
36 #define CAM_ADJUSTABLE_ALT_BUTTON 1
37
38 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "WiFi"}
39 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI }
40
41 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
42
43 // default zebra shortcut (left) conflicts with canon AF lock
44 #define SHORTCUT_TOGGLE_ZEBRA KEY_DUMMY
45
46 #define CAM_DRYOS 1
47 #define CAM_DRYOS_2_3_R39 1
48 #define CAM_DRYOS_2_3_R47 1
49
50
51 #define CAM_HAS_CMOS 1
52
53 // unlocked by default, not needed
54 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
55 #define CAM_HAS_VIDEO_BUTTON 1
56
57 // has disp
58 // #undef CAM_HAS_DISP_BUTTON
59 // no dedicated erase
60 #undef CAM_HAS_ERASE_BUTTON
61 #undef CAM_USE_ZOOM_FOR_MF
62
63 // not implemented
64 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
65 #undef CAM_VIDEO_CONTROL
66
67 // minimal recording or not only
68 #define CAM_SIMPLE_MOVIE_STATUS 1
69
70 #define CAM_IS_VID_REC_WORKS 1 // Define if the 'is_video_recording()' function works
71
72
73 #define CAM_HAS_JOGDIAL 1
74
75 #undef CAM_UNCACHED_BIT
76 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xfc148c98
77
78 // default
79 // #define CAM_CIRCLE_OF_CONFUSION 5 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
80
81
82 #define CAM_DNG_LENS_INFO { 45,10,1350,10,32,10,69,10 }
83 #define cam_CFAPattern 0x02010100
84
85 #define cam_CalibrationIlluminant1 17
86
87 // colormatrix copied from SX60
88 // from CR2 converted to DNG with adobe DNG converter
89 #define CAM_COLORMATRIX1 \
90 15686, 10000, -8326, 10000, -246, 10000, \
91 -1888, 10000, 10463, 10000, 1645, 10000, \
92 286, 10000, 708, 10000, 6145, 10000
93
94
95 #define cam_CalibrationIlluminant2 21 // aDobe
96
97 #define CAM_COLORMATRIX2 \
98 13161, 10000, -5451, 10000, -1344, 10000, \
99 -1989, 10000, 10654, 10000, 1531, 10000, \
100 -47, 10000, 1271, 10000, 4955, 10000
101 #define CAM_FORWARDMATRIX1 \
102 3002, 10000, 3390, 10000, 3251, 10000, \
103 1080, 10000, 6247, 10000, 2674, 10000, \
104 341, 10000, 42, 10000, 7868, 10000
105
106 #define CAM_FORWARDMATRIX2 \
107 3678, 10000, 4352, 10000, 1613, 10000, \
108 1429, 10000, 8091, 10000, 480, 10000, \
109 577, 10000, 26, 10000, 7648, 10000
110
111
112 #define CAM_RAW_ROWPIX 4768
113 #define CAM_RAW_ROWS 3516
114
115 #define CAM_JPEG_WIDTH 4608
116 #define CAM_JPEG_HEIGHT 3456
117
118
119 #define CAM_ACTIVE_AREA_X1 96 //??
120 #define CAM_ACTIVE_AREA_Y1 18 //??
121 #define CAM_ACTIVE_AREA_X2 4768
122 #define CAM_ACTIVE_AREA_Y2 3516
123
124 #define PARAM_CAMERA_NAME 3
125 #define CAM_DATE_FOLDER_NAMING 0x80
126 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
127 #undef CAM_SENSOR_BITS_PER_PIXEL
128 #define CAM_SENSOR_BITS_PER_PIXEL 12
129
130 #undef CAM_EXT_TV_RANGE
131 #define CAM_EXT_TV_RANGE 1
132
133 #undef CAM_EXT_AV_RANGE
134 // up to APEX 864 F22.6 at max zoom, 657 F 10 at wide
135 #define CAM_EXT_AV_RANGE 9 // Number of 1/3 stop increments to extend the Av range beyond the Canon default smallest aperture
136
137 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
138
139 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 // Draw pixels on active bitmap buffer only.
140
141 #undef CAM_BITMAP_WIDTH
142 #undef CAM_BITMAP_HEIGHT
143 #undef CAM_SCREEN_WIDTH
144 #undef CAM_SCREEN_HEIGHT
145 //following widths could be 736 and 720
146 #define CAM_BITMAP_WIDTH 640 // Actual width of bitmap screen in <s>bytes</s> pixels
147 #define CAM_BITMAP_HEIGHT 480 // Actual height of bitmap screen in rows
148 #define CAM_SCREEN_WIDTH 640// Width of bitmap screen in CHDK co-ordinates (360 or 480)
149 #define CAM_SCREEN_HEIGHT 480 // Height of bitmap screen in CHDK co-ordinates (always 240 on all cameras so far)
150 // #define CAM_SUPPORT_BITMAP_RES_CHANGE 1
151
152
153 #undef EDGE_HMARGIN
154 #define EDGE_HMARGIN 10
155
156 #define CAM_HAS_FILEWRITETASK_HOOK 1
157 //#define CAM_FILEWRITETASK_SEEKS 1
158
159 #undef CAM_BITMAP_PALETTE
160 #define CAM_BITMAP_PALETTE 100
161
162 #define CAM_ZEBRA_NOBUF 1
163
164 #define CAM_QUALITY_OVERRIDE 1
165
166 #undef CAMERA_MIN_DIST
167 #define CAMERA_MIN_DIST 10 // Override min subject distance
168 #undef CAMERA_MAX_DIST
169 #define CAMERA_MAX_DIST 1562414 // Override max subject distance; manually checked up to 1550388, with MF max 1369863 (double step)
170
171 #undef CAM_HAS_GPS
172
173 //#define CAM_CHDK_HAS_EXT_VIDEO_TIME 1
174
175 #undef CAM_USB_EVENTID
176 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
177
178 // #define CAM_HAS_MOVIE_DIGEST_MODE 1
179
180 #define CAM_NEED_SET_ZOOM_DELAY 300
181
182 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
183
184
185 #undef REMOTE_SYNC_STATUS_LED
186 // #define REMOTE_SYNC_STATUS_LED 0xC022C30C // TODO specifies an LED that turns on while camera waits for USB remote to sync
187
188 // camera crashes if sd override used in AF
189 //#define CAM_SD_OVER_IN_AF 1
190 #define CAM_SD_OVER_IN_AFL 1
191 #define CAM_SD_OVER_IN_MF 1
192
193 // AF led, for MD test code
194 #undef CAM_AF_LED
195 #define CAM_AF_LED 1
196
197 #define CAM_HAS_WIFI 1 // Camera has wifi support
198
199 //--------------------------------------------------
200
201 // From tests
202
203 #define CAM_MARKET_ISO_BASE 200