1 // Camera - sx30 - platform_camera.h
2
3 // This file contains the various settings values specific to the sx30 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 4
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1
26
27 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 // Draw pixels on active bitmap buffer only.
28
29 #undef CAM_AF_LED
30 #define CAM_AF_LED 1 // Index of AF led in camera_set_led function
31
32 #define CAM_SWIVEL_SCREEN 1
33 #define CAM_ADJUSTABLE_ALT_BUTTON 1
34 #define CAM_ALT_BUTTON_NAMES { "Shrtcut", "Flash", "Video"}
35 #define CAM_ALT_BUTTON_OPTIONS { KEY_PRINT, KEY_FLASH, KEY_VIDEO }
36 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
37 #define CAM_HAS_VIDEO_BUTTON 1
38 #define CAM_VIDEO_QUALITY_ONLY 1
39 #define CAM_BRACKETING 1
40 #undef CAM_VIDEO_CONTROL
41 #define CAM_MULTIPART 1
42 #define CAM_HAS_JOGDIAL 1
43 #undef CAM_USE_ZOOM_FOR_MF
44 #undef CAM_UNCACHED_BIT
45 #define CAM_UNCACHED_BIT 0x40000000
46 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
47
48 #undef DEFAULT_RAW_EXT
49 #define DEFAULT_RAW_EXT 2 // use .CR2
50
51 #define CAM_MIN_ISO_OVERRIDE 80 // Defines min market (non-zero) ISO override value - lower value may crash if flash used [0 = AUTO, so always allowed]
52
53 // bayer sensor pattern
54 #define cam_CFAPattern 0x01000201 // Green Blue Red Green
55
56 #define CAM_DNG_EXPOSURE_BIAS 0,1 // Specify DNG exposure bias value to 0 (to override default of -0.5 in the dng.c code)
57
58 #define CAM_DNG_LENS_INFO { 43,10, 1505,10, 27,10, 58,10 } // See comments in camera.h
59
60 // color
61
62 // TODO - Still needs work
63 #define cam_CalibrationIlluminant1 1 // Daylight
64
65 #define CAM_COLORMATRIX1 \
66 1301431, 1000000, -469837, 1000000, -102652, 1000000, \
67 -200195, 1000000, 961551, 1000000, 238645, 1000000, \
68 -16441, 1000000, 142319, 1000000, 375979, 1000000
69
70 // Sensor size, DNG image size & cropping
71 #define CAM_RAW_ROWPIX 4464
72 #define CAM_RAW_ROWS 3276
73 #define CAM_JPEG_WIDTH 4320
74 #define CAM_JPEG_HEIGHT 3240
75 #define CAM_ACTIVE_AREA_X1 24
76 #define CAM_ACTIVE_AREA_Y1 10
77 #define CAM_ACTIVE_AREA_X2 (CAM_RAW_ROWPIX-72)
78 #define CAM_ACTIVE_AREA_Y2 (CAM_RAW_ROWS-12)
79
80 // camera name
81 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData - Camera Model name
82 #define PARAM_OWNER_NAME 7 // parameter number for GetParameterData - Owner name
83 #define PARAM_DISPLAY_MODE1 59 // param number for LCD display mode when camera in playback
84 #define PARAM_DISPLAY_MODE2 62 // param number for LCD display mode when camera in record view hold mode
85 #undef CAM_SENSOR_BITS_PER_PIXEL
86 #define CAM_SENSOR_BITS_PER_PIXEL 12
87
88 #define CAM_QUALITY_OVERRIDE 1
89
90 // copied from the SX200 which has the same video buffer size
91 #undef CAM_USES_ASPECT_CORRECTION
92 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
93 #undef CAM_BITMAP_WIDTH
94 #undef CAM_BITMAP_HEIGHT
95 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes
96 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows
97
98 #undef EDGE_HMARGIN
99 #define EDGE_HMARGIN 2
100
101 #define CAM_DATE_FOLDER_NAMING 0x400 //Value found in the last function, which is called in GetImageFolder. (first compare)
102
103 #undef CAM_KEY_PRESS_DELAY
104 #define CAM_KEY_PRESS_DELAY 60 // delay after a press
105
106 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
107 // Used to enabled bracketing in custom timer, required on many recent cameras
108 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
109
110 #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av.
111
112 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1 // For cameras with 'low light' mode that does not work with raw define this
113
114 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
115
116 // #define REMOTE_SYNC_STATUS_LED 0xC0xxyyyy // specifies an LED that turns on while camera waits for USB remote to sync
117
118 #define CAM_NEED_SET_ZOOM_DELAY 300 // SX30 needs a short delay after setting the zoom before resetting focus in shooting_set_zoom()
119
120 #undef CAMERA_MIN_DIST
121 #define CAMERA_MIN_DIST 95 // Override min subject distance
122 #undef CAMERA_MAX_DIST
123 #define CAMERA_MAX_DIST 9090910 // Override max subject distance
124
125 #define CAM_ZOOM_ASSIST_BUTTON_CONTROL 1 // Activate the menu option to allow disabling the zoom assist button
126
127 #define CAM_HAS_SPORTS_MODE 1 // Camera has SPORTS mode, enable RAW exception override control
128
129 // Define shortcut overrides where defaults are not suitable
130 #define SHORTCUT_TOGGLE_ZEBRA KEY_ERASE // On camera Shutter Half Press + Up = switch MF on/off
131
132 #define CAM_HAS_FILEWRITETASK_HOOK 1 // file write hook for remote capture etc
133
134 #define CAM_SD_OVER_IN_AFL 1
135 #define CAM_SD_OVER_IN_MF 1
136
137 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
138 //--------------------------------------------------