1 // Camera - a1100 - platform_camera.h
2
3 // This file contains the various settings values specific to the a1100 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24 #define CAM_DRYOS 1
25
26 #define CAM_RAW_ROWPIX 4104
27 #define CAM_RAW_ROWS 3048
28
29 #undef CAM_USE_ZOOM_FOR_MF
30 #undef CAM_HAS_ERASE_BUTTON
31 #undef CAM_HAS_IRIS_DIAPHRAGM
32 #define CAM_HAS_ND_FILTER 1
33 #undef CAM_HAS_MANUAL_FOCUS
34 #undef CAM_HAS_USER_TV_MODES
35 #define CAM_MULTIPART 1
36 #undef CAM_VIDEO_CONTROL
37 #define CAM_REAR_CURTAIN 1
38 #undef DEFAULT_RAW_EXT
39 #define DEFAULT_RAW_EXT 2 // use .CR2
40 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
41 #define CAM_CAN_MUTE_MICROPHONE 1
42
43 #undef CAM_UNCACHED_BIT
44 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xffc16e84
45
46 #define CAM_QUALITY_OVERRIDE 1
47
48 // color
49 #define CAM_LOAD_CUSTOM_COLORS 1
50
51 #define CAM_DNG_LENS_INFO { 62,10, 248,10, 27,10, 56,10 } // See comments in camera.h
52
53 // pattern
54 #define cam_CFAPattern 0x01000201 // GBRG
55 #define CAM_COLORMATRIX1 \
56 793137, 1000000, -271722, 1000000, -113158, 1000000, \
57 -55013, 1000000, 541027, 1000000, 32394, 1000000, \
58 21921, 1000000, 71395, 1000000, 181847, 1000000
59
60 #define cam_CalibrationIlluminant1 1 // Daylight
61 // cropping
62 #define CAM_JPEG_WIDTH 4000
63 #define CAM_JPEG_HEIGHT 3000
64 #define CAM_ACTIVE_AREA_X1 20
65 #define CAM_ACTIVE_AREA_Y1 24
66 #define CAM_ACTIVE_AREA_X2 4020
67 #define CAM_ACTIVE_AREA_Y2 3024
68
69 // camera name
70 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
71 #undef CAM_SENSOR_BITS_PER_PIXEL
72 #define CAM_SENSOR_BITS_PER_PIXEL 12
73
74 #undef CAM_USES_ASPECT_CORRECTION
75 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
76 #undef CAM_BITMAP_WIDTH
77 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
78
79 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
80
81 #define CAM_HAS_FILEWRITETASK_HOOK 1
82
83 #define REMOTE_SYNC_STATUS_LED 0xC02200CC // specifies an LED that turns on while camera waits for USB remote to sync
84
85 #define CAM_SD_OVER_IN_AF 1
86 #define CAM_SD_OVER_IN_AFL 1
87 #define CAM_SD_OVER_IN_MF 1
88
89 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
90
91 #define CAM_PTP_USE_NATIVE_BUFFER 1 // use firmware buffers to avoid problems with uncached memory
92
93 //--------------------------------------------------