1 // Camera - sx620hs - platform_camera.h
2
3 // This file contains the various settings values specific to the sx620hs camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 10
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28
29 #define CAM_RAW_ROWPIX 5344
30 #define CAM_RAW_ROWS 3950
31
32 #define CAM_JPEG_WIDTH 5184 //Canon spec.
33 #define CAM_JPEG_HEIGHT 3888
34
35
36 #define CAM_ACTIVE_AREA_X1 88 //sx620hs
37 #define CAM_ACTIVE_AREA_Y1 16
38 #define CAM_ACTIVE_AREA_X2 5344 // active all the way to the edge
39 #define CAM_ACTIVE_AREA_Y2 3950 // active all the way to the bottom
40
41 #undef CAM_UNCACHED_BIT
42 #define CAM_UNCACHED_BIT 0x40000000
43
44 #undef CAM_SENSOR_BITS_PER_PIXEL
45 #define CAM_SENSOR_BITS_PER_PIXEL 12
46
47 #undef CAM_HAS_CMOS
48 #define CAM_HAS_CMOS 1
49
50 #define CAM_DNG_LENS_INFO { 45,10, 1125, 10, 32,10, 66, 10 } // See comments in camera.h
51
52 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
53
54 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1
55
56
57 // C&P from ixus175
58 #define CAM_COLORMATRIX1 \
59 827547, 1000000, -290458, 1000000, -126086, 1000000, \
60 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
61 5181, 1000000, 48183, 1000000, 245014, 1000000
62 #define cam_CalibrationIlluminant1 1 // Daylight
63
64 #undef CAM_HAS_IRIS_DIAPHRAGM
65 #undef CAM_HAS_DISP_BUTTON
66 #undef CAM_USE_ZOOM_FOR_MF
67 #undef CAM_HAS_MANUAL_FOCUS
68 #undef CAM_HAS_ERASE_BUTTON
69
70 #define CAM_HAS_ND_FILTER 1
71 #define CAM_ND_SET_AV_VALUE 1 // ND-only Camera needs AV propcase set to override ND
72
73 #define CAM_HAS_VIDEO_BUTTON 1
74 #define CAM_HAS_MOVIE_DIGEST_MODE 1 // camera doesn't actually have digest mode, this is needed by is_video_recording
75 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
76
77 #undef CAM_VIDEO_CONTROL
78 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
79
80 // #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
81
82 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // unlocked in canon firmware by default
83
84 // MakeDirectory_Fut not found, using mkdir
85 #define MKDIR_RETURN_ONE_ON_SUCCESS
86
87 //aspect correction
88 #undef CAM_USES_ASPECT_CORRECTION
89 #define CAM_USES_ASPECT_CORRECTION 1
90 #undef CAM_BITMAP_WIDTH
91 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes
92 #undef CAM_BITMAP_HEIGHT
93 #define CAM_BITMAP_HEIGHT 270
94
95 #define CAM_ADJUSTABLE_ALT_BUTTON 1
96
97 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Wifi" }
98 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI }
99
100 #undef CAM_USB_EVENTID
101 #define CAM_USB_EVENTID 0x302 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
102
103
104 #define CAM_DATE_FOLDER_NAMING 0x080
105
106 #define PARAM_CAMERA_NAME 3
107
108 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
109
110 #define CAM_NEED_SET_ZOOM_DELAY 500 // Define to add a delay after setting the zoom position
111
112 // only non-AF led available
113 // #define REMOTE_SYNC_STATUS_LED 0xC022302C // specifies an LED that turns on while camera waits for USB remote to sync
114
115 #undef CAM_AF_LED
116 #define CAM_AF_LED 1
117
118 #undef CAM_KEY_PRESS_DELAY
119 #define CAM_KEY_PRESS_DELAY 60 // delay after a press - Required by zoom_in/zoom_out buttons
120
121
122 // #define CAM_SD_OVER_IN_AF 1
123 #define CAM_SD_OVER_IN_AFL 1
124 #define CAM_SD_OVER_IN_MF 1
125
126 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1
127
128 #define CAM_3ARG_DebugAssert 1
129
130 #define CAM_HAS_WIFI 1 // Camera has wifi support
131
132 //----------------------------------------------------------
133 #undef CAM_DEFAULT_MENU_CURSOR_BG
134 #undef CAM_DEFAULT_MENU_CURSOR_FG
135 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
136 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors