1 // Camera - sx400is - platform_camera.h
2
3 // This file contains the various settings values specific to the sx400is camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 6
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28 #undef CAM_CIRCLE_OF_CONFUSION
29 #define CAM_CIRCLE_OF_CONFUSION 6 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
30
31 #define CAM_RAW_ROWPIX 4704 // Found @0xff970830
32 #define CAM_RAW_ROWS 3504 // Found @0xff97083c
33
34 #define CAM_JPEG_WIDTH 4608 //To do
35 #define CAM_JPEG_HEIGHT 3456 //To do
36
37 #define CAM_ACTIVE_AREA_X1 16 //To do
38 #define CAM_ACTIVE_AREA_Y1 26 //To do
39 #define CAM_ACTIVE_AREA_X2 4640 //To do
40 #define CAM_ACTIVE_AREA_Y2 3486 //To do
41
42 #undef CAM_UNCACHED_BIT
43 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff826234
44
45 #undef CAM_SENSOR_BITS_PER_PIXEL
46 #define CAM_SENSOR_BITS_PER_PIXEL 12
47
48 #define CAM_DNG_LENS_INFO { 43,10, 1290, 10, 34,10, 58,10 } // See comments in camera.h
49
50 #define cam_CFAPattern 0x01000201 // [Green Blue Red Green]
51
52
53 // TODO C&P from D10
54 #define CAM_COLORMATRIX1 \
55 14052, 10000, -5229, 10000, -1156, 10000, \
56 -1325, 10000, 9420, 10000, 2252, 10000, \
57 -498, 10000, 1957, 10000, 4116, 10000
58 #define cam_CalibrationIlluminant1 21 // D65
59
60 #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av (for bracketing).
61
62 #undef CAM_USE_ZOOM_FOR_MF
63 #undef CAM_HAS_MANUAL_FOCUS
64
65 #define CAM_HAS_VIDEO_BUTTON 1
66 #define CAM_HAS_MOVIE_DIGEST_MODE 1 // camera doesn't actually have digest mode, this is needed by is_video_recording
67 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
68
69 #undef CAM_VIDEO_CONTROL
70
71 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
72
73 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // unlocked in canon firmware by default
74
75 // MakeDirectory_Fut not found, using mkdir
76 #define MKDIR_RETURN_ONE_ON_SUCCESS
77
78 //aspect correction
79 #undef CAM_USES_ASPECT_CORRECTION
80 #define CAM_USES_ASPECT_CORRECTION 1
81 #undef CAM_BITMAP_WIDTH
82 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
83 #undef CAM_BITMAP_HEIGHT
84 #define CAM_BITMAP_HEIGHT 360
85
86 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
87
88 #define CAM_ADJUSTABLE_ALT_BUTTON 1
89
90 #define CAM_ALT_BUTTON_NAMES { "Playback", "Disp", "Video" }
91 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_DISPLAY, KEY_VIDEO }
92
93 // TODO
94 #undef CAM_USB_EVENTID
95 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
96
97 // TODO
98 #define CAM_DATE_FOLDER_NAMING 0x080 // Found @0xffac9420 (pass as 3rd param to GetImageFolder)
99
100 #define PARAM_CAMERA_NAME 3 // Found @0xffcffab4
101
102 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
103
104 #define CAM_HAS_FILEWRITETASK_HOOK 1 // FileWriteTask hook is available (local file write can be prevented)
105 #define CAM_FILEWRITETASK_SEEKS 1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50
106
107 #define CAM_NEED_SET_ZOOM_DELAY 500 // Define to add a delay after setting the zoom position
108
109 // only non-AF led available
110 // #define REMOTE_SYNC_STATUS_LED 0xC022302C // specifies an LED that turns on while camera waits for USB remote to sync
111
112 #undef CAM_AF_LED
113 #define CAM_AF_LED 1
114
115 #undef CAM_KEY_PRESS_DELAY
116 #define CAM_KEY_PRESS_DELAY 60 // delay after a press - Required by zoom_in/zoom_out buttons
117
118 #define CAM_SD_OVER_IN_AF 1
119 #define CAM_SD_OVER_IN_AFL 1
120 #define CAM_SD_OVER_IN_MF 1
121
122 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1
123
124 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE
125
126 #define CAM_3ARG_DebugAssert 1 // DebugAssert takes 3 arguments
127
128 //----------------------------------------------------------