root/platform/a1300/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - A1300 - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the A1300 camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_DRYOS                       1
  24     #define CAM_PROPSET                     5
  25 
  26     #define CAM_DRYOS_2_3_R39               1       // Defined for cameras with DryOS version R39 or higher
  27     #define CAM_DRYOS_2_3_R47               1       // Defined for cameras with DryOS version R47 or higher
  28 
  29     #define CAM_RAW_ROWPIX                  4704 // Found @0xff92def4 a810
  30     #define CAM_RAW_ROWS                    3504 // Found @0xff92df00 a810
  31 
  32     #undef  CAM_UNCACHED_BIT
  33     #define CAM_UNCACHED_BIT                0x40000000 // Found @0xff832e74 a810
  34 
  35     #define CAM_JPEG_WIDTH                  4608
  36     #define CAM_JPEG_HEIGHT                 3456
  37     #define CAM_ACTIVE_AREA_X1              16
  38     #define CAM_ACTIVE_AREA_Y1              26
  39     #define CAM_ACTIVE_AREA_X2              4640
  40     #define CAM_ACTIVE_AREA_Y2              3486
  41 
  42     #define CAM_DNG_LENS_INFO               { 50,10, 250,10, 28,10, 69,10 } // See comments in camera.h a810
  43 
  44     #undef  CAM_SENSOR_BITS_PER_PIXEL
  45     #define CAM_SENSOR_BITS_PER_PIXEL       12
  46 
  47     #define cam_CFAPattern                  0x01000201   // [Green Blue Red Green]
  48     
  49     #define CAM_COLORMATRIX1                             \
  50     827547, 1000000, -290458, 1000000, -126086, 1000000, \
  51     -12829, 1000000,  530507, 1000000,   50537, 1000000, \
  52       5181, 1000000,   48183, 1000000,  245014, 1000000
  53 
  54     #define cam_CalibrationIlluminant1      1       // Daylight
  55 
  56     #define CAM_ZEBRA_NOBUF                 1
  57 
  58     #define PARAM_CAMERA_NAME               4       // parameter number for GetParameterData
  59 
  60     #define CAM_HAS_ND_FILTER               1
  61 
  62     #define CAM_HAS_VIDEO_BUTTON            1
  63     
  64     #undef  CAM_VIDEO_CONTROL
  65     #define CAM_VIDEO_QUALITY_ONLY          1
  66     #define CAM_HAS_MOVIE_DIGEST_MODE       1   //Camera doesn't actually have MOVIE_DIGEST_MOVIE, but this is required by is_video_recording.
  67                                                 //See http://chdk.setepontos.com/index.php?topic=9986.msg118892#msg118892
  68     #define CAM_CAN_MUTE_MICROPHONE         1
  69 
  70     #define CAM_DATE_FOLDER_NAMING          0x400
  71 
  72     #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1
  73 
  74     #undef  CAM_HAS_IRIS_DIAPHRAGM
  75 
  76     #undef  CAM_HAS_ERASE_BUTTON
  77 
  78     #undef  CAM_HAS_IS                              // Camera does not have an image stabilizer
  79 
  80     #undef  CAM_HAS_MANUAL_FOCUS
  81 
  82     #define CAM_LOAD_CUSTOM_COLORS          1       // Enable loading CHDK colors into the camera palette memory/hardware
  83 
  84     #undef  CAM_USES_ASPECT_CORRECTION
  85     #define CAM_USES_ASPECT_CORRECTION      1
  86     #undef CAM_BITMAP_WIDTH
  87     #define CAM_BITMAP_WIDTH                720   // Actual width of bitmap screen in bytes
  88 
  89     #define CAM_ADJUSTABLE_ALT_BUTTON       1    // ALT-button can be set from menu
  90     #define CAM_ALT_BUTTON_NAMES            { "Playback", "Help",   }
  91     #define CAM_ALT_BUTTON_OPTIONS          { KEY_PLAYBACK, KEY_HELP }
  92     #undef  CAM_HAS_DISP_BUTTON
  93     #define CAM_DISP_BUTTON_NAME            "Video"
  94     #define SHORTCUT_TOGGLE_RAW             KEY_VIDEO
  95 
  96     #define CAM_HAS_FILEWRITETASK_HOOK       1
  97     #define CAM_FILEWRITETASK_SEEKS          1
  98 
  99     #define CAM_NEED_SET_ZOOM_DELAY          300  // Define to add a delay after setting the zoom position
 100     #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS  1    // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
 101     #define CAM_USE_ALT_SET_ZOOM_POINT       1    // Define to use the alternate code in lens_set_zoom_point()
 102     #define CAM_USE_ALT_PT_MoveOpticalZoomAt 1    // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
 103 
 104     #define CAM_AF_SCAN_DURING_VIDEO_RECORD  1
 105     #define CAM_QUALITY_OVERRIDE             1
 106 
 107     #undef  CAM_USB_EVENTID
 108     #define CAM_USB_EVENTID                  0x202   // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
 109     #define CAM_MISSING_RAND                 1    // srand()/rand() functions not found in firmware. If defined, CHDK use functions implemented in C
 110     #define MKDIR_RETURN_ONE_ON_SUCCESS      1    // mkdir() return 1 on success, 0 on fail.
 111 
 112 //  #define REMOTE_SYNC_STATUS_LED  0xC0220130      // TODO specifies an LED that turns on while camera waits for USB remote to sync
 113 
 114     #undef  CAM_AF_LED
 115     #define CAM_AF_LED                       1   // Index of AF led in camera_set_led function
 116 
 117     #define CAM_SD_OVER_IN_AF                1
 118     #define CAM_SD_OVER_IN_MF                1
 119 
 120     #define CAM_IS_VID_REC_WORKS            1   // is_video_recording() function works    
 121 
 122 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */