1 // Camera - IXUS145_ELPH135 - platform_camera.h
2
3 // This file contains the various settings values specific to the IXUS145_ELPH135 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_DRYOS 1
24 #define CAM_PROPSET 6
25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28 #undef CAM_CIRCLE_OF_CONFUSION
29 #define CAM_CIRCLE_OF_CONFUSION 5 // TODO
30
31 #define CAM_RAW_ROWPIX 4704 // Found @0xff963f44
32 #define CAM_RAW_ROWS 3504 // Found @0xff963f50
33
34
35 #define CAM_JPEG_WIDTH 4608 //To do
36 #define CAM_JPEG_HEIGHT 3456 //To do
37
38 #define CAM_ACTIVE_AREA_X1 16 //To do
39 #define CAM_ACTIVE_AREA_Y1 26 //To do
40 #define CAM_ACTIVE_AREA_X2 4640 //To do
41 #define CAM_ACTIVE_AREA_Y2 3486 //To do
42
43 #undef CAM_UNCACHED_BIT
44 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff825e30
45
46 #undef CAM_SENSOR_BITS_PER_PIXEL
47 #define CAM_SENSOR_BITS_PER_PIXEL 12
48
49 #define CAM_DNG_LENS_INFO { 50,10, 400,10, 32,10, 69,10 } // See comments in camera.h
50
51 #define cam_CFAPattern 0x01000201 // [Green Blue Red Green]
52
53 //TODO
54 #define CAM_COLORMATRIX1 \
55 827547, 1000000, -290458, 1000000, -126086, 1000000, \
56 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
57 5181, 1000000, 48183, 1000000, 245014, 1000000
58 #define cam_CalibrationIlluminant1 1 // Daylight
59
60 // no separate erase button
61 #undef CAM_HAS_ERASE_BUTTON
62 #undef CAM_HAS_DISP_BUTTON
63
64 #define CAM_HAS_VIDEO_BUTTON 1
65 #undef CAM_VIDEO_CONTROL
66 #define CAM_VIDEO_QUALITY_ONLY 1
67 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
68
69 #define CAM_ZEBRA_NOBUF 1
70
71 #undef CAM_HAS_IRIS_DIAPHRAGM
72 #define CAM_HAS_ND_FILTER 1
73
74
75 #define DNG_VERT_RLE_BADPIXELS 1
76
77 #define CAM_DATE_FOLDER_NAMING 0x080 // Found @0xffa9c0bc (pass as 3rd param to GetImageFolder)
78 #define PARAM_CAMERA_NAME 3 // Found @0xffc8f22c
79
80 #undef CAM_HAS_IS // Camera does not have an image stabilizer
81
82 #undef CAM_HAS_MANUAL_FOCUS
83 #undef CAM_USE_ZOOM_FOR_MF
84
85 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
86
87 //To do
88 #undef CAM_USES_ASPECT_CORRECTION
89 #define CAM_USES_ASPECT_CORRECTION 1
90 #undef CAM_BITMAP_WIDTH
91 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes (may be larger than displayed area)
92 #undef CAM_BITMAP_HEIGHT
93 #define CAM_BITMAP_HEIGHT 360 // http://chdk.setepontos.com/index.php?topic=12144.msg119748#msg119748
94
95 #define CAM_ADJUSTABLE_ALT_BUTTON 1 // ALT-button can be set from menu
96 #define CAM_ALT_BUTTON_NAMES { "Playback", "Help" }
97 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_HELP }
98
99 #define CAM_HAS_FILEWRITETASK_HOOK 1
100 #define CAM_FILEWRITETASK_SEEKS 1
101
102 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
103 #define CAM_HAS_ZOOM_LEVER 1 // Camera has dedicated zoom buttons
104
105 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
106
107 #define CAM_QUALITY_OVERRIDE 1
108
109 #undef CAM_MARKET_ISO_BASE
110 #define CAM_MARKET_ISO_BASE 200 // Override base 'market' ISO value, from isobase.lua
111
112 #undef CAM_USB_EVENTID
113 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
114
115 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
116
117 #undef CAM_AF_LED
118 #define CAM_AF_LED 1 // Index of AF led in camera_set_led function
119
120 #define CAM_SD_OVER_IN_AF 1
121 #define CAM_SD_OVER_IN_AFL 1
122 #define CAM_SD_OVER_IN_MF 1
123
124 #define CAM_3ARG_DebugAssert 1 // DebugAssert takes 3 arguments
125
126 //--------------------------------------------------