root/platform/s2is/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - s2is - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the s2is camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_PROPSET                     1
  24 
  25     #define CAM_RAW_ROWPIX                  2672    // for 5 MP
  26     #define CAM_RAW_ROWS                    1968    // for 5 MP
  27 
  28     #define CAM_SWIVEL_SCREEN               1
  29     #define CAM_ADJUSTABLE_ALT_BUTTON       1
  30     #define CAM_ALT_BUTTON_NAMES            { "Shrtcut", "Flash", "Timer", "ISO", "Video" }
  31     #define CAM_ALT_BUTTON_OPTIONS          { KEY_PRINT, KEY_FLASH, KEY_TIMER, KEY_ISO, KEY_VIDEO }
  32     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
  33     #define CAM_HAS_VIDEO_BUTTON            1
  34     #undef  CAM_VIDEO_CONTROL
  35 
  36     #define CAM_DNG_LENS_INFO               { 60,10, 720,10, 27,10, 35,10 } // See comments in camera.h
  37     // pattern
  38     #define cam_CFAPattern                  0x02010100 // Red  Green  Green  Blue
  39     // color
  40     #define CAM_COLORMATRIX1                              \
  41      547708, 1000000, -143462, 1000000,  -99243, 1000000, \
  42     -186838, 1000000,  663925, 1000000,   50970, 1000000, \
  43       -5810, 1000000,   79162, 1000000,  266988, 1000000
  44 
  45     #define cam_CalibrationIlluminant1      1       // Daylight
  46     // cropping
  47     #define CAM_JPEG_WIDTH                  2592
  48     #define CAM_JPEG_HEIGHT                 1944
  49     #define CAM_ACTIVE_AREA_X1              14
  50     #define CAM_ACTIVE_AREA_Y1              10
  51     #define CAM_ACTIVE_AREA_X2              2626
  52     #define CAM_ACTIVE_AREA_Y2              1966
  53     // camera name
  54     #define PARAM_CAMERA_NAME               2       // parameter number for GetParameterData
  55     #define CAM_BRACKETING                  1
  56     #define DNG_EXT_FROM                    ".DPS"
  57 
  58 //    #define REMOTE_SYNC_STATUS_LED     0xC0xxyyyy        // specifies an LED that turns on while camera waits for USB remote to sync
  59 
  60     // "real" to "market" conversion definitions
  61     #define SV96_MARKET_OFFSET              0           // market-real sv96 conversion value
  62 
  63     // Conversion values for 'no' conversion required
  64     // Uses integer arithmetic to avoid floating point calculations. Values choses to get as close
  65     // to the desired multiplication factor as possible within normal ISO range.
  66     #define ISO_MARKET_TO_REAL_MULT         2
  67     #define ISO_MARKET_TO_REAL_SHIFT        1
  68     #define ISO_MARKET_TO_REAL_ROUND        0
  69     #define ISO_REAL_TO_MARKET_MULT         2
  70     #define ISO_REAL_TO_MARKET_SHIFT        1
  71     #define ISO_REAL_TO_MARKET_ROUND        0
  72 
  73     // Warning : no know SD override method for this camera
  74 
  75     #define CAM_IS_VID_REC_WORKS            1   // is_video_recording() function works
  76 
  77     #undef CAM_PTP_SCREEN_UNLOCK_EVENT  // cam doesn't have cameracon_state identified
  78 
  79 //--------------------------------------------------
  80 
  81     #undef  CAM_DEFAULT_MENU_CURSOR_BG
  82     #undef  CAM_DEFAULT_MENU_CURSOR_FG
  83     #define CAM_DEFAULT_MENU_CURSOR_BG  IDX_COLOR_RED      // Override menu cursor colors
  84     #define CAM_DEFAULT_MENU_CURSOR_FG  IDX_COLOR_WHITE    // Override menu cursor colors

/* [<][>][^][v][top][bottom][index][help] */