root/platform/ixus150_elph140/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - ixus150_elph140 - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the A2500 camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_PROPSET                     6
  24     #define CAM_DRYOS                       1
  25     #define CAM_DRYOS_2_3_R39               1       // Defined for cameras with DryOS version R39 or higher
  26     #define CAM_DRYOS_2_3_R47               1       // Defined for cameras with DryOS version R47 or higher
  27 
  28     #define CAM_RAW_ROWPIX                  4704    // Found @0xff96462c
  29     #define CAM_RAW_ROWS                    3504    // Found @0xff964638
  30 
  31     #define CAM_JPEG_WIDTH                  4608
  32     #define CAM_JPEG_HEIGHT                 3456
  33     
  34     #define CAM_ACTIVE_AREA_X1              0
  35     #define CAM_ACTIVE_AREA_Y1              0
  36     #define CAM_ACTIVE_AREA_X2              4704
  37     #define CAM_ACTIVE_AREA_Y2              3504
  38 
  39     #undef  CAM_UNCACHED_BIT
  40     #define CAM_UNCACHED_BIT                0x40000000 // Found @0xff825e30
  41 
  42     #undef  CAM_SENSOR_BITS_PER_PIXEL
  43     #define CAM_SENSOR_BITS_PER_PIXEL       12
  44     
  45     #define CAM_DNG_LENS_INFO               { 50,10, 400,10, 32,10, 69,10 } // See comments in camera.h
  46     
  47     #define cam_CFAPattern                  0x01000201   // [Green Blue Red Green]
  48     
  49     //TODO
  50     #define CAM_COLORMATRIX1                             \
  51     827547, 1000000, -290458, 1000000, -126086, 1000000, \
  52     -12829, 1000000,  530507, 1000000,   50537, 1000000, \
  53       5181, 1000000,   48183, 1000000,  245014, 1000000
  54 
  55     #define cam_CalibrationIlluminant1      1       // Daylight
  56 
  57     #define CAM_DATE_FOLDER_NAMING          0x080   // Found @0xffa95368 (pass as 3rd param to GetImageFolder)
  58     #define PARAM_CAMERA_NAME               3       // Found @0xffc86500
  59 
  60     // MakeDirectory_Fut not found, using mkdir
  61     #define MKDIR_RETURN_ONE_ON_SUCCESS     1
  62 
  63     #define CAM_HAS_FILEWRITETASK_HOOK      1       // FileWriteTask hook is available (local file write can be prevented)
  64     #define CAM_FILEWRITETASK_SEEKS         1       // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50
  65 
  66     #define CAM_FILE_COUNTER_IS_VAR         1       // file counter is variable file_counter_var in stubs, not a param
  67 
  68     #undef  CAM_HAS_IRIS_DIAPHRAGM
  69     #define CAM_HAS_ND_FILTER               1
  70     #define CAM_EXT_TV_RANGE                1       // CHDK can make exposure time longer than 64s
  71 
  72     #define CAM_QUALITY_OVERRIDE            1       // enable JPEG quality override
  73 
  74     #undef  CAM_USES_ASPECT_CORRECTION
  75     #define CAM_USES_ASPECT_CORRECTION      1       // camera uses the modified graphics primitives to map screens an viewports to buffers more sized
  76     #undef  CAM_BITMAP_WIDTH
  77     #define CAM_BITMAP_WIDTH                720     // Actual width of bitmap screen in bytes
  78     #undef  CAM_BITMAP_HEIGHT
  79     #define CAM_BITMAP_HEIGHT               360
  80 
  81     #define CAM_ZEBRA_NOBUF                 1
  82 
  83     #define CAM_LOAD_CUSTOM_COLORS          1       // Enable loading CHDK colors into the camera palette memory/hardware
  84 
  85     #define CAM_ADJUSTABLE_ALT_BUTTON       1
  86 
  87     #define CAM_ALT_BUTTON_NAMES            { "Playback", "Help" }
  88     #define CAM_ALT_BUTTON_OPTIONS          { KEY_PLAYBACK, KEY_HELP }
  89 
  90     #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY   1
  91 
  92     #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE   1   // For cameras with 'low light' mode that does not work with raw define this
  93 
  94     #define CAM_USE_ALT_SET_ZOOM_POINT          1   // Define to use the alternate code in lens_set_zoom_point()
  95     #define CAM_USE_ALT_PT_MoveOpticalZoomAt    1   // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
  96     #define CAM_NEED_SET_ZOOM_DELAY             300 // Define to add a delay after setting the zoom position
  97     
  98     #undef  CAM_HAS_ERASE_BUTTON
  99     #undef  CAM_HAS_DISP_BUTTON
 100     #undef  CAM_DEFAULT_ALT_BUTTON
 101     #define CAM_DEFAULT_ALT_BUTTON          KEY_PLAYBACK
 102     #define SHORTCUT_TOGGLE_RAW             KEY_VIDEO
 103     #define CAM_HAS_VIDEO_BUTTON            1
 104 
 105     #undef CAM_AF_LED
 106     #define CAM_AF_LED                      1
 107 
 108     //#define CAM_VIDEO_QUALITY_ONLY          1
 109     #undef  CAM_VIDEO_CONTROL
 110     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO    // it's unlocked by default
 111     #define CAM_IS_VID_REC_WORKS            1       // TODO
 112     
 113     #undef  CAM_USB_EVENTID
 114     #define CAM_USB_EVENTID                 0x202   // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
 115 
 116     //#define CAM_DRIVE_MODE_FROM_TIMER_MODE  1
 117 
 118     #define CAM_SD_OVER_IN_AF               1
 119     #define CAM_SD_OVER_IN_AFL              1
 120     #define CAM_SD_OVER_IN_MF               1
 121 
 122     #define CAM_3ARG_DebugAssert                1   // DebugAssert takes 3 arguments
 123 
 124 //----------------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */