1 // Camera - ixus140_elph130 - platform_camera.h
2
3 // This file contains the various settings values specific to the elph130 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 6
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28 #undef CAM_CIRCLE_OF_CONFUSION
29 #define CAM_CIRCLE_OF_CONFUSION 6 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
30
31 #define CAM_RAW_ROWPIX 4704 // Found @0xff1be31c
32 #define CAM_RAW_ROWS 3504 // Found @0xff1be328
33
34 #define CAM_JPEG_WIDTH 4608
35 #define CAM_JPEG_HEIGHT 3456
36
37 // defined to pixels containing any data, commented excludes darker border
38 #define CAM_ACTIVE_AREA_X1 12 // 28
39 #define CAM_ACTIVE_AREA_Y1 10 // 20
40 #define CAM_ACTIVE_AREA_X2 4666 // 4652
41 #define CAM_ACTIVE_AREA_Y2 3492 // 3480
42
43 #undef CAM_UNCACHED_BIT
44 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff038dd4
45
46 #undef CAM_SENSOR_BITS_PER_PIXEL
47 #define CAM_SENSOR_BITS_PER_PIXEL 12
48
49 #define CAM_DNG_LENS_INFO { 50,10, 400,10, 32,10, 69,10 } // See comments in camera.h
50
51 // verified
52 #define cam_CFAPattern 0x01000201 // Green Blue Red Green
53
54 // TODO C&P from D10
55 #define CAM_COLORMATRIX1 \
56 14052, 10000, -5229, 10000, -1156, 10000, \
57 -1325, 10000, 9420, 10000, 2252, 10000, \
58 -498, 10000, 1957, 10000, 4116, 10000
59 #define cam_CalibrationIlluminant1 21 // D65
60
61 #define CAM_HAS_VIDEO_BUTTON 1
62 // no separate erase button
63 #undef CAM_HAS_ERASE_BUTTON
64 #undef CAM_HAS_DISP_BUTTON
65 #undef CAM_USE_ZOOM_FOR_MF
66 #undef CAM_HAS_IRIS_DIAPHRAGM
67 #define CAM_HAS_ND_FILTER 1
68
69 // long shutter is actually user TV, may work ?
70 #undef CAM_HAS_USER_TV_MODES
71 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
72
73 #undef CAM_VIDEO_CONTROL
74 // not working
75 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
76 // #define CAM_VIDEO_QUALITY_ONLY 1
77 // #define CAM_CHDK_HAS_EXT_VIDEO_MENU 1
78
79 // TODO
80 // #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
81
82 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // unlocked in canon firmware by default
83
84 #undef CAM_HAS_MANUAL_FOCUS
85
86 // MakeDirectory_Fut not found, using mkdir
87 #define MKDIR_RETURN_ONE_ON_SUCCESS
88
89 //aspect correction
90 #undef CAM_USES_ASPECT_CORRECTION
91 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
92 #undef CAM_BITMAP_WIDTH
93 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
94
95 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 // Draw pixels on active bitmap buffer only.
96
97 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
98 // doesn't seem to conflict badly with anything
99
100 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
101 // Used to enabled bracketing in custom timer, required on many recent cameras
102 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
103
104 #define CAM_ADJUSTABLE_ALT_BUTTON 1
105
106 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video" }
107 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO }
108
109 // verified
110 #undef CAM_USB_EVENTID
111 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
112
113 #undef CAMERA_MIN_DIST
114 #define CAMERA_MIN_DIST 45 // Override min subject distance in macro mode
115 #undef CAMERA_MAX_DIST
116 // TODO largest value obtained focusing at distant things
117 #define CAMERA_MAX_DIST 775194 // Define max distance that can be set in _MoveFocusLensToDistance (allow override for superzooms - SX30/SX40)
118
119 #define CAM_DATE_FOLDER_NAMING 0x80
120
121 #define PARAM_CAMERA_NAME 3 // parameter number for GetParameterData
122
123 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
124
125 #define CAM_HAS_FILEWRITETASK_HOOK 1 // FileWriteTask hook is available (local file write can be prevented)
126 #define CAM_FILEWRITETASK_SEEKS 1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50
127
128 // only non-AF led available
129 #define REMOTE_SYNC_STATUS_LED 0xC0220094 // specifies an LED that turns on while camera waits for USB remote to sync
130 #define CAM_REMOTE_ANALOG_AV 1 // Camera supports analog AV detect for remote signal
131 #define CAM_REMOTE_AtoD_CHANNEL 5 // Camera supports using 3rd battery terminal as well as USB for remote - value = A/D channel to poll
132 // elph130 - open circuit 1023, 10k ohm ~340 (=25c) 3.5k = ~160 (54c)
133 // #define CAM_REMOTE_AtoD_THRESHOLD 200 // 3rd battery terminal A/D reading threshold ( lower = 1, higher = 0 )
134
135 #undef CAM_AF_LED
136 #define CAM_AF_LED 1
137
138 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1 // For cameras with 'low light' mode that does not work with raw define this
139
140 #define SHORTCUT_TOGGLE_RAW KEY_VIDEO // conflicts with adjustable alt, but not many to choose from
141
142 #define CAM_SD_OVER_IN_AFL 1
143 #define CAM_SD_OVER_IN_MF 1
144
145 #define CAM_NEED_SET_ZOOM_DELAY 150 // Define to add a delay after setting the zoom position
146
147 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
148
149 #define CAM_HAS_WIFI 1 // Camera has wifi support
150
151 //----------------------------------------------------------