1 // Camera - SX150IS - platform_camera.h
2
3 // This file contains the various settings values specific to the SX150IS camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 4
24 #define CAM_DRYOS 1
25 #define CAM_DRYOS_2_3_R39 1
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
29 #define CAM_HAS_VIDEO_BUTTON 1
30 #define CAM_VIDEO_QUALITY_ONLY 1
31 #define CAM_BRACKETING 1
32 #undef CAM_VIDEO_CONTROL
33 #define CAM_HAS_JOGDIAL 1
34 #undef CAM_USE_ZOOM_FOR_MF
35 #undef CAM_UNCACHED_BIT
36 #define CAM_UNCACHED_BIT 0x40000000
37
38 #define CAM_ADJUSTABLE_ALT_BUTTON 1
39 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Display" }
40 #define CAM_ALT_BUTTON_OPTIONS { KEY_PRINT, KEY_VIDEO, KEY_DISPLAY }
41
42 #define CAM_DNG_LENS_INFO { 50,10, 600,10, 34,10, 56,10 } // See comments in camera.h
43 // pattern
44 #define cam_CFAPattern 0x01000201 // Green Blue Red Green
45 // color
46 #define CAM_COLORMATRIX1 \
47 1301431, 1000000, -469837, 1000000, -102652, 1000000, \
48 -200195, 1000000, 961551, 1000000, 238645, 1000000, \
49 -16441, 1000000, 142319, 1000000, 375979, 1000000
50 #define cam_CalibrationIlluminant1 1 // Daylight
51
52 // Sensor size, DNG image size & cropping
53 #define CAM_RAW_ROWPIX 4464
54 #define CAM_RAW_ROWS 3276
55 #define CAM_JPEG_WIDTH 4368
56 #define CAM_JPEG_HEIGHT 3254
57 #define CAM_ACTIVE_AREA_X1 24
58 #define CAM_ACTIVE_AREA_Y1 10
59 #define CAM_ACTIVE_AREA_X2 (CAM_RAW_ROWPIX-72)
60 #define CAM_ACTIVE_AREA_Y2 (CAM_RAW_ROWS-12)
61
62 // camera name
63 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
64 #undef CAM_SENSOR_BITS_PER_PIXEL
65 #define CAM_SENSOR_BITS_PER_PIXEL 12
66
67 #define CAM_QUALITY_OVERRIDE 1
68
69 // copied from the SX200 which has the same video buffer size
70 #undef CAM_USES_ASPECT_CORRECTION
71 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
72 #undef CAM_BITMAP_WIDTH
73 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
74
75 #define CAM_ZEBRA_NOBUF 1
76
77 //#undef EDGE_HMARGIN
78 //#define EDGE_HMARGIN 28
79
80 #define CAM_DATE_FOLDER_NAMING 0x400
81
82 // CR2 accesible through USB
83 #undef DEFAULT_RAW_EXT
84 #define DEFAULT_RAW_EXT 2
85
86 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
87 // Used to enabled bracketing in custom timer, required on many recent cameras
88 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
89
90 #undef CAM_USB_EVENTID
91 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
92
93 #define REMOTE_SYNC_STATUS_LED 0xC0220014 // specifies an LED that turns on while camera waits for USB remote to sync
94
95 #define CAM_NEED_SET_ZOOM_DELAY 300 // http://chdk.setepontos.com/index.php?topic=6953.msg119736#msg119736
96
97 #define CAM_SD_OVER_IN_AF 1
98 #define CAM_SD_OVER_IN_AFL 1
99 #define CAM_SD_OVER_IN_MF 1
100
101 #undef CAM_AF_LED
102 #define CAM_AF_LED 1
103
104 #define CAM_REAR_CURTAIN 1
105 //--------------------------------------------------