1 // Camera - a560 - platform_camera.h
2
3 // This file contains the various settings values specific to the a560 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24
25 #define CAM_RAW_ROWPIX 3152 // for 7 MP
26 #define CAM_RAW_ROWS 2340 // for 7 MP
27
28 #undef CAM_USE_ZOOM_FOR_MF
29 #define CAM_MULTIPART 1
30 #undef CAM_HAS_ERASE_BUTTON
31 #undef CAM_HAS_IRIS_DIAPHRAGM
32 #define CAM_HAS_ND_FILTER 1
33 #undef CAM_HAS_MANUAL_FOCUS
34 #undef CAM_HAS_USER_TV_MODES
35 #define CAM_HAS_HI_ISO_AUTO_MODE 1
36 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
37 #undef CAM_HAS_IS
38 #define CAM_CAN_MUTE_MICROPHONE 1
39 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
40
41 #define CAM_DNG_LENS_INFO { 58,10, 232,10, 26,10, 55,10 } // See comments in camera.h
42 // pattern
43 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
44 // color
45 #define CAM_COLORMATRIX1 \
46 15265, 1, -6193, 1, -1558, 1, \
47 -4125, 1, 12116, 1, 2010, 1, \
48 -888, 1, 1639, 1, 5220, 1
49
50 #define cam_CalibrationIlluminant1 17 // Standard light A
51 // cropping
52 #define CAM_JPEG_WIDTH 3072
53 #define CAM_JPEG_HEIGHT 2304
54 #define CAM_ACTIVE_AREA_X1 38
55 #define CAM_ACTIVE_AREA_Y1 14
56 #define CAM_ACTIVE_AREA_X2 3146
57 #define CAM_ACTIVE_AREA_Y2 2338
58 // camera name
59 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
60 #define DNG_EXT_FROM ".DPS"
61
62 #define REMOTE_SYNC_STATUS_LED 0xc02200C4 // specifies an LED that turns on while camera waits for USB remote to sync
63
64 #define CAM_SD_OVER_IN_AF 1
65
66 #define CAM_USB_EVENTID_VXWORKS 0x10A5 // LogicalEvent ID for ConnectUSBCable, needed to enable USB mode switch
67
68 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
69
70 //--------------------------------------------------
71
72 #undef CAM_DEFAULT_MENU_CURSOR_BG
73 #undef CAM_DEFAULT_MENU_CURSOR_FG
74 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
75 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors