1 // Camera - g5x - platform_camera.h
2
3 // This file contains the various settings values specific to the G5X camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 13
24
25 #define CAM_HAS_NATIVE_ND_FILTER 1 // Camera has built-in ND filter with Canon menu support for enable/disable
26 #define CAM_HAS_ND_FILTER 1 // Camera has built-in ND filter (in addition to iris)
27
28 #define CAM_ADJUSTABLE_ALT_BUTTON 1
29 #define CAM_ALT_BUTTON_NAMES { "WiFi", "Video", "Playback" }
30 #define CAM_ALT_BUTTON_OPTIONS { KEY_WIFI, KEY_VIDEO, KEY_PLAYBACK }
31
32 #define CAM_DRYOS 1
33 #define CAM_DRYOS_2_3_R39 1
34 #define CAM_DRYOS_2_3_R47 1
35
36 #define CAM_HAS_CMOS 1
37
38 #define CAM_HAS_JOGDIAL 1
39
40 // not implemented
41 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
42 #undef CAM_VIDEO_CONTROL
43
44 // minimal recording or not only
45 #define CAM_SIMPLE_MOVIE_STATUS 1
46
47 #define CAM_IS_VID_REC_WORKS 1 // Define if the 'is_video_recording()' function works
48
49 #define CAM_HAS_VIDEO_BUTTON 1
50
51 #undef CAM_UNCACHED_BIT
52 #define CAM_UNCACHED_BIT 0x40000000
53
54 #define CAM_DNG_LENS_INFO { 88,10, 368,10, 18,10, 28,10 }
55 #define cam_CFAPattern 0x02010100
56
57 #define CAM_RAW_ROWPIX 5632
58 #define CAM_RAW_ROWS 3710
59
60 #define CAM_JPEG_WIDTH 5472
61 #define CAM_JPEG_HEIGHT 3648
62
63 #define CAM_ACTIVE_AREA_X1 96
64 #define CAM_ACTIVE_AREA_Y1 18
65 #define CAM_ACTIVE_AREA_X2 5632
66 #define CAM_ACTIVE_AREA_Y2 3710
67
68 #undef CAM_SENSOR_BITS_PER_PIXEL
69 #define CAM_SENSOR_BITS_PER_PIXEL 14
70
71 #undef CAM_BLACK_LEVEL
72 #define CAM_BLACK_LEVEL 2047
73
74 #define PARAM_CAMERA_NAME 3
75 #define CAM_DATE_FOLDER_NAMING 0x80
76 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
77
78 #undef CAM_HAS_ERASE_BUTTON
79
80 #define CAM_HAS_DISPLAY_REFRESH_FLAG 1 // 'display_needs_refresh' variable is available to trigger CHDK UI update
81 #undef CAM_BITMAP_WIDTH
82 #undef CAM_BITMAP_HEIGHT
83 #undef CAM_SCREEN_WIDTH
84 #undef CAM_SCREEN_HEIGHT
85 #define CAM_BITMAP_WIDTH 736 // Actual width of bitmap screen in <s>bytes</s> pixels (YUV buffer)
86 #define CAM_BITMAP_HEIGHT 480 // Actual height of bitmap screen in rows
87 #define CAM_SCREEN_WIDTH 720 // Width of bitmap screen in CHDK co-ordinates (360 or 480)
88 #define CAM_SCREEN_HEIGHT 480 // Height of bitmap screen in CHDK co-ordinates (always 240 on all cameras so far)
89
90 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
91
92 #undef CAM_CIRCLE_OF_CONFUSION
93 #define CAM_CIRCLE_OF_CONFUSION 11 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
94
95 #define cam_CalibrationIlluminant1 17
96 #define cam_CalibrationIlluminant2 21 // D65
97
98 // from CR2 converted to DNG with adobe DNG converter
99 #define CAM_COLORMATRIX1 \
100 11125, 10000, -5937, 10000, 355, 10000, \
101 -2979, 10000, 10926, 10000, 2360, 10000, \
102 -116, 10000, 835, 10000, 6064, 10000
103
104 #define CAM_COLORMATRIX2 \
105 9602, 10000, -3823, 10000, -937, 10000, \
106 -2984, 10000, 11495, 10000, 1675, 10000, \
107 -407, 10000, 1415, 10000, 5049, 10000,
108
109 #define CAM_FORWARDMATRIX1 \
110 4264, 10000, 4193, 10000, 1187, 10000, \
111 1832, 10000, 7811, 10000, 357, 10000, \
112 854, 10000, 16, 10000, 7381, 10000
113
114 #define CAM_FORWARDMATRIX2 \
115 4036, 10000, 4056, 10000, 1551, 10000, \
116 1780, 10000, 7757, 10000, 463, 10000, \
117 764, 10000, 1, 10000, 7487, 10000
118
119 // "real" to "market" conversion definitions
120 #define SV96_MARKET_OFFSET 0 // market and real appear to be identical on this cam
121 #define ISO_MARKET_TO_REAL_MULT 1
122 #define ISO_MARKET_TO_REAL_SHIFT 0
123 #define ISO_MARKET_TO_REAL_ROUND 0
124 #define ISO_REAL_TO_MARKET_MULT 1
125 #define ISO_REAL_TO_MARKET_SHIFT 0
126 #define ISO_REAL_TO_MARKET_ROUND 0
127
128 #define CAM_HAS_CANON_RAW 1 // has native Canon raw
129
130 // AF led, for MD test code
131 #undef CAM_AF_LED
132 #define CAM_AF_LED 1
133
134 #define CAM_ZEBRA_NOBUF 1
135
136 #undef EDGE_HMARGIN
137 #define EDGE_HMARGIN 10
138
139 #define CAM_EXT_TV_RANGE 1
140
141 #define CAM_HAS_FILEWRITETASK_HOOK 1
142
143 #define CAM_PTP_USE_NATIVE_BUFFER 1 // use firmware buffers to avoid problems with uncached memory
144
145 #define CAM_HAS_WIFI 1 // Camera has wifi support
146
147 #define CAM_CLEAN_OVERLAY 1
148
149 #define CAM_SD_OVER_IN_AFL 1
150 #define CAM_SD_OVER_IN_MF 1
151
152 #undef CAMERA_MIN_DIST
153 #define CAMERA_MIN_DIST 109 // Override min subject distance
154 #undef CAMERA_MAX_DIST
155 #define CAMERA_MAX_DIST 10543 // Override max subject distance
156
157 #undef CAM_USB_EVENTID
158 #define CAM_USB_EVENTID 0x302 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
159
160 #define CAM_AV_OVERRIDE_IRIS_FIX 1
161
162 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
163
164 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
165 #define CAM_VIDEO_QUALITY_ONLY 1
166 #undef CAM_VIDEO_CONTROL
167 #undef CAM_USE_ZOOM_FOR_MF
168
169 #define REMOTE_SYNC_STATUS_LED -1 // -1 = special value to force code to use debug_led
170
171 //--------------------------------------------------