root/platform/ixus145_elph135/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - IXUS145_ELPH135 - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the IXUS145_ELPH135 camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_DRYOS                           1
  24     #define CAM_PROPSET                         6
  25     #define CAM_DRYOS_2_3_R39                   1       // Defined for cameras with DryOS version R39 or higher
  26     #define CAM_DRYOS_2_3_R47                   1       // Defined for cameras with DryOS version R47 or higher
  27 
  28     #undef  CAM_CIRCLE_OF_CONFUSION
  29     #define CAM_CIRCLE_OF_CONFUSION             5       // TODO
  30 
  31     #define CAM_RAW_ROWPIX                      4704 // Found @0xff963f44
  32     #define CAM_RAW_ROWS                        3504 // Found @0xff963f50
  33 
  34 
  35     #define CAM_JPEG_WIDTH                      4608    //To do
  36     #define CAM_JPEG_HEIGHT                     3456    //To do
  37 
  38     #define CAM_ACTIVE_AREA_X1                  16      //To do
  39     #define CAM_ACTIVE_AREA_Y1                  26      //To do
  40     #define CAM_ACTIVE_AREA_X2                  4640    //To do
  41     #define CAM_ACTIVE_AREA_Y2                  3486    //To do
  42 
  43     #undef  CAM_UNCACHED_BIT
  44     #define CAM_UNCACHED_BIT                    0x40000000 // Found @0xff825e30
  45 
  46     #undef  CAM_SENSOR_BITS_PER_PIXEL
  47     #define CAM_SENSOR_BITS_PER_PIXEL           12
  48 
  49     #define CAM_DNG_LENS_INFO                   { 50,10, 400,10, 32,10, 69,10 } // See comments in camera.h
  50 
  51     #define cam_CFAPattern                      0x01000201   // [Green Blue Red Green]
  52 
  53     //TODO
  54     #define CAM_COLORMATRIX1                             \
  55     827547, 1000000, -290458, 1000000, -126086, 1000000, \
  56     -12829, 1000000,  530507, 1000000,   50537, 1000000, \
  57       5181, 1000000,   48183, 1000000,  245014, 1000000
  58     #define cam_CalibrationIlluminant1          1       // Daylight
  59 
  60     // no separate erase button
  61     #undef  CAM_HAS_ERASE_BUTTON
  62     #undef  CAM_HAS_DISP_BUTTON
  63 
  64     #define CAM_HAS_VIDEO_BUTTON                1
  65     #undef  CAM_VIDEO_CONTROL
  66     #define CAM_VIDEO_QUALITY_ONLY              1
  67     #define CAM_IS_VID_REC_WORKS                1   // is_video_recording() function works
  68 
  69     #define CAM_ZEBRA_NOBUF                     1
  70 
  71     #undef  CAM_HAS_IRIS_DIAPHRAGM
  72     #define CAM_HAS_ND_FILTER                   1
  73 
  74 
  75     #define DNG_VERT_RLE_BADPIXELS              1
  76 
  77     #define CAM_DATE_FOLDER_NAMING              0x080 // Found @0xffa9c0bc (pass as 3rd param to GetImageFolder)
  78     #define PARAM_CAMERA_NAME                   3 // Found @0xffc8f22c
  79 
  80     #undef  CAM_HAS_IS                              // Camera does not have an image stabilizer
  81 
  82     #undef  CAM_HAS_MANUAL_FOCUS
  83     #undef  CAM_USE_ZOOM_FOR_MF
  84 
  85     #define CAM_LOAD_CUSTOM_COLORS              1       // Enable loading CHDK colors into the camera palette memory/hardware
  86 
  87     //To do
  88     #undef  CAM_USES_ASPECT_CORRECTION
  89     #define CAM_USES_ASPECT_CORRECTION          1
  90     #undef  CAM_BITMAP_WIDTH
  91     #define CAM_BITMAP_WIDTH                    720     // Actual width of bitmap screen in bytes (may be larger than displayed area)
  92     #undef  CAM_BITMAP_HEIGHT
  93     #define CAM_BITMAP_HEIGHT                   360     // http://chdk.setepontos.com/index.php?topic=12144.msg119748#msg119748
  94 
  95     #define CAM_ADJUSTABLE_ALT_BUTTON           1   // ALT-button can be set from menu
  96     #define CAM_ALT_BUTTON_NAMES                { "Playback", "Help" }
  97     #define CAM_ALT_BUTTON_OPTIONS              { KEY_PLAYBACK, KEY_HELP }
  98 
  99     #define CAM_HAS_FILEWRITETASK_HOOK          1
 100     #define CAM_FILEWRITETASK_SEEKS             1
 101 
 102     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
 103     #define CAM_USE_ALT_SET_ZOOM_POINT          1      // Define to use the alternate code in lens_set_zoom_point()
 104     #define CAM_USE_ALT_PT_MoveOpticalZoomAt    1      // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
 105     #define CAM_HAS_ZOOM_LEVER                  1      // Camera has dedicated zoom buttons
 106 
 107     #define CAM_FILE_COUNTER_IS_VAR             1       // file counter is variable file_counter_var in stubs, not a param
 108 
 109     #define CAM_QUALITY_OVERRIDE                1
 110 
 111     #undef  CAM_MARKET_ISO_BASE
 112     #define CAM_MARKET_ISO_BASE                 200 // Override base 'market' ISO value, from isobase.lua
 113 
 114     #undef  CAM_USB_EVENTID
 115     #define CAM_USB_EVENTID                     0x202   // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
 116 
 117     #define MKDIR_RETURN_ONE_ON_SUCCESS         1       // mkdir() return 1 on success, 0 on fail.
 118 
 119     #undef  CAM_AF_LED
 120     #define CAM_AF_LED                          1   // Index of AF led in camera_set_led function
 121 
 122     #define CAM_SD_OVER_IN_AF                   1
 123     #define CAM_SD_OVER_IN_AFL                  1
 124     #define CAM_SD_OVER_IN_MF                   1
 125 
 126     #define CAM_3ARG_DebugAssert                1   // DebugAssert takes 3 arguments
 127 
 128 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */