1 // Camera - A3300 - platform_camera.h
2
3 // This file contains the various settings values specific to the A3300 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 // Sure values
24 //
25 #define CAM_DRYOS 1
26 #define CAM_PROPSET 4
27 #define CAM_DRYOS_2_3_R39 1
28 #define CAM_DRYOS_2_3_R47 1
29
30 #define CAM_RAW_ROWPIX 4704 // Found @0xFFB213A0 a3300is
31 #define CAM_RAW_ROWS 3504 // Found @0xFFB21398 a3300is
32
33 #define CAM_ADJUSTABLE_ALT_BUTTON 1
34 #define CAM_ALT_BUTTON_NAMES { "Playback", "Face", "Disp"}
35 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_FACE, KEY_DISPLAY }
36
37 #undef CAM_UNCACHED_BIT
38 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff83a6a8 a3300is
39
40 #define CAM_JPEG_WIDTH 4608 // a3300is @FFB213A0
41 #define CAM_JPEG_HEIGHT 3456 // a3300is @FFB213A8
42
43 #define CAM_ACTIVE_AREA_X1 16
44 #define CAM_ACTIVE_AREA_Y1 26
45 #define CAM_ACTIVE_AREA_X2 4640
46 #define CAM_ACTIVE_AREA_Y2 3486
47 #define CAM_DNG_LENS_INFO { 50,10, 250,10, 28,10, 59,10 } // See comments in camera.h a3300is
48
49 #undef CAM_SENSOR_BITS_PER_PIXEL
50 #define CAM_SENSOR_BITS_PER_PIXEL 12
51
52 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
53
54 #define CAM_COLORMATRIX1 \
55 827547, 1000000, -290458, 1000000, -126086, 1000000, \
56 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
57 5181, 1000000, 48183, 1000000, 245014, 1000000
58
59 #define cam_CalibrationIlluminant1 1 // Daylight
60
61 #undef CAM_USES_ASPECT_CORRECTION
62 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
63
64 #undef CAM_BITMAP_WIDTH
65 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
66
67 #define CAM_QUALITY_OVERRIDE 1
68
69 #define CAM_ZEBRA_NOBUF 1
70
71 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
72
73 #undef CAM_HAS_ERASE_BUTTON
74
75 #define CAM_HAS_ND_FILTER 1
76
77 #define CAM_VIDEO_QUALITY_ONLY 1
78 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
79 #define CAM_CAN_MUTE_MICROPHONE 1
80 #define CAM_HAS_MOVIE_DIGEST_MODE 1 // no, it doesn't, but movie_status is 6 in movie mode idle
81
82 #define CAM_NEED_SET_ZOOM_DELAY 300 // Define to add a delay after setting the zoom position
83 #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
84
85 #define CAM_DATE_FOLDER_NAMING 0x400
86
87 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
88
89 #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1
90
91 #undef CAM_HAS_IRIS_DIAPHRAGM
92
93 #undef CAM_HAS_MANUAL_FOCUS
94 #undef CAM_VIDEO_CONTROL
95
96 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
97
98
99 #define CAM_HAS_FILEWRITETASK_HOOK 1
100 #define CAM_FILEWRITETASK_MULTIPASS 1
101
102 // Define shortcut overrides where defaults are not suitable
103 // a3300 has no erase button, so make DISP button the toggle_raw and Alt +/- shortcuts.
104 //Alt mode
105 // NOTE both of these conflict with adjustable alt
106 #define SHORTCUT_TOGGLE_RAW KEY_DISPLAY
107 #define SHORTCUT_MF_TOGGLE KEY_FACE
108
109
110 #define CAM_SD_OVER_IN_AF 1
111 #define CAM_SD_OVER_IN_AFL 1
112 #define CAM_SD_OVER_IN_MF 1
113
114
115 //--------------------------------------------------