1 // Camera - A3200 - platform_camera.h
2
3 // This file contains the various settings values specific to the A3200 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 // Sure values
24 #define CAM_DRYOS 1
25 #define CAM_PROPSET 4
26 #define CAM_DRYOS_2_3_R39 1
27 #define CAM_DRYOS_2_3_R47 1
28
29 #define CAM_RAW_ROWPIX 4416 // a3200 Found @0xff93a144
30 #define CAM_RAW_ROWS 3296 // a3200 Found @0xff93a14c
31
32 #undef CAM_UNCACHED_BIT
33 #define CAM_UNCACHED_BIT 0x40000000 // a3200 Found @0xff83a6c0
34
35 #define CAM_JPEG_WIDTH 4320 // a3200 from dpreview
36 #define CAM_JPEG_HEIGHT 3240 // a3200 from dpreview
37
38 //loc_ffb20c48:
39 //ffb20c48: e3a00d45 mov r0, #4416 ; 0x1140
40 //ffb20c4c: e5810000 str r0, [r1]
41 //ffb20c50: e3a00ece mov r0, #3296 ; 0xce0
42 #define CAM_ACTIVE_AREA_X1 96 //
43 #define CAM_ACTIVE_AREA_Y1 56 //
44 #define CAM_ACTIVE_AREA_X2 4416 // a3200 found @ffb20c48
45 #define CAM_ACTIVE_AREA_Y2 3296 // a3200 found @ffb20c50
46 #define CAM_DNG_LENS_INFO { 50,10, 250,10, 28,10, 59,10 } // See comments in camera.h a3300is
47
48 #undef CAM_SENSOR_BITS_PER_PIXEL
49 #define CAM_SENSOR_BITS_PER_PIXEL 12
50
51 #undef CAM_BITMAP_WIDTH
52 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
53
54 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
55
56 #define CAM_COLORMATRIX1 \
57 827547, 1000000, -290458, 1000000, -126086, 1000000, \
58 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
59 5181, 1000000, 48183, 1000000, 245014, 1000000
60
61 #define cam_CalibrationIlluminant1 1 // Daylight
62
63 #undef CAM_USES_ASPECT_CORRECTION
64 #define CAM_USES_ASPECT_CORRECTION 1 // camera uses the modified graphics primitives to map screens an viewports to buffers more sized
65
66 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
67 #define CAM_QUALITY_OVERRIDE 1
68 #define CAM_CAN_MUTE_MICROPHONE 1
69
70 #define CAM_ZEBRA_NOBUF 1 // ??
71
72 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
73
74 #define CAM_HAS_ND_FILTER 1 //
75
76 #define CAM_VIDEO_QUALITY_ONLY 1 //
77
78 #define CAM_DATE_FOLDER_NAMING 0x400
79
80 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // ??
81
82 #define CAM_CHDK_HAS_EXT_VIDEO_TIME 1
83 #define CAM_HAS_MOVIE_DIGEST_MODE 1 // no, it doesn't, but movie_status is 6 in movie mode idle
84
85 #undef CAM_HAS_IRIS_DIAPHRAGM
86 #undef CAM_HAS_ERASE_BUTTON
87
88 #undef CAM_HAS_MANUAL_FOCUS
89 #undef CAM_VIDEO_CONTROL
90
91 #define CAM_LOAD_CUSTOM_COLORS
92
93 #define CAM_NEED_SET_ZOOM_DELAY 300 // Define to add a delay after setting the zoom position
94 #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoo
95
96 #define CAM_ADJUSTABLE_ALT_BUTTON 1
97 #define CAM_ALT_BUTTON_NAMES { "Playback", "Face", "Disp"}
98 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_FACE, KEY_DISPLAY }
99
100 #define CAM_HAS_FILEWRITETASK_HOOK 1
101 #define CAM_FILEWRITETASK_MULTIPASS 1
102
103 // Define shortcut overrides where defaults are not suitable
104 // a3200 has no erase button, so make DISP button the toggle_raw and Alt +/- shortcuts.
105 //Alt mode
106 // NOTE both of these conflict with adjustable alt
107 #define SHORTCUT_TOGGLE_RAW KEY_DISPLAY
108 #define SHORTCUT_MF_TOGGLE KEY_FACE
109
110 #define CAM_SD_OVER_IN_AF 1
111 #define CAM_SD_OVER_IN_AFL 1
112 #define CAM_SD_OVER_IN_MF 1
113
114 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
115
116 //--------------------------------------------------