root/platform/g7x2/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - g5x - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the G5X camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_PROPSET                         10
  24 
  25     #define CAM_HAS_NATIVE_ND_FILTER            1   // Camera has built-in ND filter with Canon menu support for enable/disable
  26     #define CAM_HAS_ND_FILTER                   1   // Camera has built-in ND filter (in addition to iris)
  27 
  28     #undef  CAM_KEY_PRESS_DELAY
  29     #define CAM_KEY_PRESS_DELAY                 60  // delay after a press
  30 
  31     #define CAM_ADJUSTABLE_ALT_BUTTON           1
  32     #define CAM_ALT_BUTTON_NAMES                { "WiFi", "Video", "Display", "Playback" }
  33     #define CAM_ALT_BUTTON_OPTIONS              { KEY_WIFI, KEY_VIDEO, KEY_DISPLAY, KEY_PLAYBACK }
  34 
  35     #define CAM_DRYOS                           1
  36     #define CAM_DRYOS_2_3_R39                   1
  37     #define CAM_DRYOS_2_3_R47                   1
  38 
  39     #define CAM_HAS_CMOS                        1
  40 
  41     #define CAM_HAS_VIDEO_BUTTON                1
  42 
  43     #undef  CAM_UNCACHED_BIT
  44     #define CAM_UNCACHED_BIT                    0x40000000
  45 
  46     #define CAM_DNG_LENS_INFO                   { 88,10, 368,10, 18,10, 28,10 }
  47     #define cam_CFAPattern                      0x02010100
  48 
  49     #define CAM_RAW_ROWPIX                      5632
  50     #define CAM_RAW_ROWS                        3710
  51 
  52     #define CAM_JPEG_WIDTH                      5472
  53     #define CAM_JPEG_HEIGHT                     3648
  54 
  55     #define CAM_ACTIVE_AREA_X1                  96
  56     #define CAM_ACTIVE_AREA_Y1                  18
  57     #define CAM_ACTIVE_AREA_X2                  5632
  58     #define CAM_ACTIVE_AREA_Y2                  3710
  59 
  60     #undef  CAM_SENSOR_BITS_PER_PIXEL
  61     #define CAM_SENSOR_BITS_PER_PIXEL           14
  62 
  63     #undef CAM_BLACK_LEVEL
  64     #define CAM_BLACK_LEVEL                     2047
  65 
  66     #define PARAM_CAMERA_NAME                   3
  67     #define CAM_DATE_FOLDER_NAMING              0x80
  68     #define CAM_FILE_COUNTER_IS_VAR             1     // file counter is variable file_counter_var in stubs, not a param
  69 
  70     #undef  CAM_HAS_ERASE_BUTTON
  71     #define CAM_SHOW_OSD_IN_SHOOT_MENU          1
  72 
  73     #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY   1           // Draw pixels on active bitmap buffer only.
  74     #undef  CAM_BITMAP_WIDTH
  75     #undef  CAM_BITMAP_HEIGHT
  76     #undef  CAM_SCREEN_WIDTH
  77     #undef  CAM_SCREEN_HEIGHT
  78     #define CAM_BITMAP_WIDTH                    736 // Actual width of bitmap screen in <s>bytes</s> pixels (YUV buffer)
  79     #define CAM_BITMAP_HEIGHT                   480 // Actual height of bitmap screen in rows
  80     #define CAM_SCREEN_WIDTH                    720 // Width of bitmap screen in CHDK co-ordinates (360 or 480)
  81     #define CAM_SCREEN_HEIGHT                   480 // Height of bitmap screen in CHDK co-ordinates (always 240 on all cameras so far)
  82 
  83     #define MKDIR_RETURN_ONE_ON_SUCCESS         1    // mkdir() return 1 on success, 0 on fail.
  84 
  85     #undef  CAM_CIRCLE_OF_CONFUSION
  86     #define CAM_CIRCLE_OF_CONFUSION             11  // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
  87 
  88     #define cam_CalibrationIlluminant1          17
  89     #define cam_CalibrationIlluminant2          21      // D65
  90 
  91     // from CR2 converted to DNG with adobe DNG converter
  92     #define CAM_COLORMATRIX1 \
  93     11125, 10000, -5937, 10000,  355, 10000, \
  94     -2979, 10000, 10926, 10000, 2360, 10000, \
  95      -116, 10000,   835, 10000, 6064, 10000
  96 
  97     #define CAM_COLORMATRIX2 \
  98      9602, 10000, -3823, 10000, -937, 10000, \
  99     -2984, 10000, 11495, 10000, 1675, 10000, \
 100      -407, 10000,  1415, 10000, 5049, 10000,
 101 
 102     #define CAM_FORWARDMATRIX1 \
 103      4264, 10000, 4193, 10000, 1187, 10000, \
 104      1832, 10000, 7811, 10000,  357, 10000, \
 105       854, 10000,   16, 10000, 7381, 10000
 106 
 107     #define CAM_FORWARDMATRIX2 \
 108      4036, 10000, 4056, 10000, 1551, 10000, \
 109      1780, 10000, 7757, 10000,  463, 10000, \
 110       764, 10000,    1, 10000, 7487, 10000
 111 
 112     // "real" to "market" conversion definitions
 113     #define SV96_MARKET_OFFSET                  0   // market and real appear to be identical on this cam
 114     #define ISO_MARKET_TO_REAL_MULT             1
 115     #define ISO_MARKET_TO_REAL_SHIFT            0
 116     #define ISO_MARKET_TO_REAL_ROUND            0
 117     #define ISO_REAL_TO_MARKET_MULT             1
 118     #define ISO_REAL_TO_MARKET_SHIFT            0
 119     #define ISO_REAL_TO_MARKET_ROUND            0
 120 
 121     #define CAM_HAS_CANON_RAW                   1   // has native Canon raw
 122 
 123     // AF led, for MD test code
 124     #undef CAM_AF_LED
 125     #define CAM_AF_LED                          1
 126 
 127     #define CAM_ZEBRA_NOBUF                     1
 128 
 129     #undef  EDGE_HMARGIN
 130     #define EDGE_HMARGIN                        10
 131 
 132     // TODO: Below needs tp be checked
 133 
 134     #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE   1 // there's no low light mode, so just in case
 135     #define CAM_DISABLE_RAW_IN_HANDHELD_NIGHT_SCN   1 // raw would make absolutely no sense in this mode
 136     #define CAM_DISABLE_RAW_IN_HQ_BURST         1 // raw wouldn't make any sense in this mode either
 137     #define CAM_DISABLE_RAW_IN_HYBRID_AUTO      1 // For cameras that lock up while saving raw in "Hybrid Auto" mode
 138     #define CAM_DISABLE_RAW_IN_AUTO             1 // disabled due to wrong raw buffer selection at quick shutter press
 139     #define CAM_DISABLE_RAW_IN_SPORTS           1 // sports mode seems to use a no-yet-found code path and corrupts JPEG/DNG
 140 
 141     #define CAM_AV_OVERRIDE_IRIS_FIX            1
 142 
 143     #define CAM_DRIVE_MODE_FROM_TIMER_MODE      1
 144 
 145     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
 146     #define CAM_VIDEO_QUALITY_ONLY              1
 147     #undef  CAM_VIDEO_CONTROL
 148     #undef  CAM_USE_ZOOM_FOR_MF
 149 
 150     #define CAM_EXT_TV_RANGE                    1
 151 
 152     //#define CAM_HAS_FILEWRITETASK_HOOK          1
 153     //#define CAM_FILEWRITETASK_SEEKS             1
 154 
 155     //#define CAM_QUALITY_OVERRIDE                1
 156 
 157     #undef  CAMERA_MIN_DIST
 158     #define CAMERA_MIN_DIST                     100         // Override min subject distance
 159     #undef  CAMERA_MAX_DIST
 160     #define CAMERA_MAX_DIST                     1550000     // Override max subject distance; manually checked up to 1550388, with MF max 1369863 (double step)
 161 
 162     //#define CAM_CHDK_HAS_EXT_VIDEO_TIME         1
 163 
 164     #undef  CAM_USB_EVENTID
 165     #define CAM_USB_EVENTID                     0x302       // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
 166 
 167     #define CAM_HAS_MOVIE_DIGEST_MODE           1 
 168 
 169     #define CAM_USE_ALT_SET_ZOOM_POINT          1           // Define to use the alternate code in lens_set_zoom_point()
 170     #define CAM_USE_ALT_PT_MoveOpticalZoomAt    1           // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
 171     #define CAM_NEED_SET_ZOOM_DELAY             300
 172 
 173     #undef  REMOTE_SYNC_STATUS_LED
 174     // #define REMOTE_SYNC_STATUS_LED              0xC022C30C  // TODO specifies an LED that turns on while camera waits for USB remote to sync
 175  
 176     #define CAM_SD_OVER_IN_AF  1
 177     #define CAM_SD_OVER_IN_MF  1
 178 
 179 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */