1 // Camera - sx110is - platform_camera.h
2
3 // This file contains the various settings values specific to the sx110is camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24 #define CAM_DRYOS 1
25
26 #define CAM_RAW_ROWPIX 3720
27 #define CAM_RAW_ROWS 2772
28
29 #define CAM_CAN_MUTE_MICROPHONE 1
30 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
31 #define CAM_REAR_CURTAIN 1
32 #define CAM_ADJUSTABLE_ALT_BUTTON 1
33 #define CAM_ALT_BUTTON_NAMES { "Print", "Face" }
34 #define CAM_ALT_BUTTON_OPTIONS { KEY_PRINT, KEY_FACE }
35 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
36 #undef CAM_VIDEO_CONTROL
37 #define CAM_MULTIPART 1
38 #define CAM_HAS_JOGDIAL 1
39 #define CAM_HAS_HI_ISO_AUTO_MODE 1
40 #undef CAM_USE_ZOOM_FOR_MF
41 #undef CAM_SENSOR_BITS_PER_PIXEL
42 #define CAM_SENSOR_BITS_PER_PIXEL 12
43 // black level set to 128 per reports on the forum
44 #undef CAM_BLACK_LEVEL
45 #define CAM_BLACK_LEVEL 128
46 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
47
48 #define CAM_DNG_LENS_INFO { 60,10, 600,10, 28,10, 43,10 } // See comments in camera.h
49 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
50 #define CAM_COLORMATRIX1 \
51 530200, 1000000, -42600, 1000000, -33000, 1000000, \
52 -525400, 1000000, 1092700, 1000000, 223700, 1000000, \
53 -103700, 1000000, 117900, 1000000, 421600, 1000000
54
55 #define CAM_ACTIVE_AREA_X1 8
56 #define CAM_ACTIVE_AREA_Y1 14
57 #define CAM_ACTIVE_AREA_X2 3688
58 #define CAM_ACTIVE_AREA_Y2 2772
59 #define cam_CalibrationIlluminant1 1 // Daylight
60 #define CAM_JPEG_WIDTH 3456
61 #define CAM_JPEG_HEIGHT 2592
62
63 #define CAM_HAS_FILEWRITETASK_HOOK 1
64
65 //#define REMOTE_SYNC_STATUS_LED 0xC0xxyyyy // specifies an LED that turns on while camera waits for USB remote to sync
66
67 // Warning : SD override for this camera with these values has not been tested
68 #define CAM_CAN_SD_OVERRIDE_UNKNOWN_STATUS 1
69 #define CAM_SD_OVER_IN_AF 1
70 #define CAM_SD_OVER_IN_AFL 1
71 #define CAM_SD_OVER_IN_MF 1
72
73 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
74
75 //--------------------------------------------------
76
77 #undef CAM_DEFAULT_MENU_CURSOR_BG
78 #undef CAM_DEFAULT_MENU_CURSOR_FG
79 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
80 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors