root/platform/sx240hs/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - sx240hs - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the SX240HS camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE   1
  24     #define CAM_AV_OVERRIDE_IRIS_FIX            1
  25     #undef  CAM_KEY_PRESS_DELAY
  26     #define CAM_KEY_PRESS_DELAY                 60      // delay after a press
  27     #define CAM_ADJUSTABLE_ALT_BUTTON           1
  28     #define CAM_ALT_BUTTON_NAMES                { "Playback", "Video", "Display" }
  29     #define CAM_ALT_BUTTON_OPTIONS              { KEY_PLAYBACK, KEY_VIDEO, KEY_DISPLAY }
  30     #define CAM_DRIVE_MODE_FROM_TIMER_MODE      1
  31 
  32     #define CAM_DRYOS_2_3_R39                   1
  33     #define CAM_DRYOS_2_3_R47                   1
  34     #define CAM_PROPSET                         5
  35     #define CAM_DATE_FOLDER_NAMING              0x400
  36     #define CAM_DRYOS                           1
  37     #define CAM_RAW_ROWPIX                      4176        //ASM1989 FINSIG  Found @0xff17db40
  38     #define CAM_RAW_ROWS                        3060        // Found @0xff17db4c
  39     #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY   1           // Draw pixels on active bitmap buffer only.
  40 
  41     #define CAM_HAS_CMOS                        1
  42 
  43     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
  44     #define CAM_HAS_VIDEO_BUTTON                1
  45     #define CAM_VIDEO_QUALITY_ONLY              1
  46 
  47     #undef  CAM_VIDEO_CONTROL
  48 
  49     #define CAM_HAS_JOGDIAL                     1
  50     #undef  CAM_USE_ZOOM_FOR_MF
  51 
  52     #undef  CAM_UNCACHED_BIT
  53     #define CAM_UNCACHED_BIT                    0x40000000
  54 
  55     #define CAM_DNG_LENS_INFO                   { 45,10,900,10,35,10,68,10 } // See comments in camera.h  -> finsig finds the focus_len_table address at 0xfff4bcf0.This is using DNG_LENS_INFO defined as { 45,10, 900,10, 35,10, 68,10 },
  56     #define cam_CFAPattern                      0x02010100
  57 
  58     #define CAM_COLORMATRIX1                            \
  59     544808, 1000000, -174047, 1000000, -80399, 1000000, \
  60     -75055, 1000000,  440444, 1000000,  11367, 1000000, \
  61      -5801, 1000000,   71589, 1000000, 118914, 1000000
  62 
  63     #define cam_CalibrationIlluminant1          17
  64 
  65     #define CAM_JPEG_WIDTH                      4000
  66     #define CAM_JPEG_HEIGHT                     3000
  67 
  68     #define CAM_ACTIVE_AREA_X1                  96
  69     #define CAM_ACTIVE_AREA_Y1                  24
  70     #define CAM_ACTIVE_AREA_X2                  4176
  71     #define CAM_ACTIVE_AREA_Y2                  3060
  72 
  73     #define PARAM_CAMERA_NAME                   4
  74     #undef  CAM_SENSOR_BITS_PER_PIXEL
  75     #define CAM_SENSOR_BITS_PER_PIXEL           12
  76 
  77     #undef  CAM_HAS_ERASE_BUTTON
  78     #define CAM_SHOW_OSD_IN_SHOOT_MENU          1
  79 
  80     #undef  CAM_USES_ASPECT_CORRECTION
  81     #define CAM_USES_ASPECT_CORRECTION          1           //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
  82     #undef  CAM_BITMAP_WIDTH
  83     #undef  CAM_BITMAP_HEIGHT
  84     #define CAM_BITMAP_WIDTH                    960         // Actual width of bitmap screen in bytes
  85     #define CAM_BITMAP_HEIGHT                   270         // Actual height of bitmap screen in rows
  86     #undef  EDGE_HMARGIN
  87     #define EDGE_HMARGIN                        10
  88 
  89     #define CAM_HAS_FILEWRITETASK_HOOK          1
  90     #define CAM_FILEWRITETASK_SEEKS             1
  91 
  92     #define CAM_ZEBRA_NOBUF                     1
  93 
  94     #define CAM_QUALITY_OVERRIDE                1
  95 
  96     #undef  CAMERA_MIN_DIST
  97     #define CAMERA_MIN_DIST                     100         // Override min subject distance
  98 
  99     #define CAM_CHDK_HAS_EXT_VIDEO_TIME         1
 100 
 101     #define CAM_LOAD_CUSTOM_COLORS              1           // Enable loading CHDK colors into the camera palette memory/hardware
 102 
 103     #undef  CAM_USB_EVENTID
 104     #define CAM_USB_EVENTID                     0x202       // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
 105 
 106     #define CAM_HAS_MOVIE_DIGEST_MODE           1
 107 
 108     #define CAM_USE_ALT_SET_ZOOM_POINT          1           // Define to use the alternate code in lens_set_zoom_point()
 109     #define CAM_USE_ALT_PT_MoveOpticalZoomAt    1           // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
 110     #define CAM_NEED_SET_ZOOM_DELAY             300
 111 
 112     #define MKDIR_RETURN_ONE_ON_SUCCESS         1    // mkdir() return 1 on success, 0 on fail.
 113 
 114     #define CAM_DISABLE_RAW_IN_AUTO             1 // For cameras that don't have valid raw in AUTO mode
 115 
 116     #undef  REMOTE_SYNC_STATUS_LED
 117 //  #define REMOTE_SYNC_STATUS_LED              0xC022C30C  // TODO specifies an LED that turns on while camera waits for USB remote to sync
 118 
 119     #define CAM_SD_OVER_IN_AF                   1
 120     #define CAM_SD_OVER_IN_MF                   1
 121 
 122     #define CAM_IS_VID_REC_WORKS                1   // is_video_recording() function works    
 123 
 124 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */