1 // Camera - sx730hs - platform_camera.h
2
3 // This file contains the various settings values specific to the sx730hs camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 12
24
25 #define CAM_HAS_SPORTS_MODE 1
26
27 #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av (for bracketing).
28
29 // doesn't seem to needed
30 // #undef CAM_KEY_PRESS_DELAY
31 // #define CAM_KEY_PRESS_DELAY 60 // delay after a press
32
33 #define CAM_ADJUSTABLE_ALT_BUTTON 1
34
35 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Wifi" }
36 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI}
37 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
38
39 // default zebra shortcut (left) conflicts with canon AF lock
40 #define SHORTCUT_TOGGLE_ZEBRA KEY_MENU
41 // default histo shortcut (up) conflicts with canon AE lock
42 #define SHORTCUT_TOGGLE_HISTO KEY_DUMMY
43
44 #define CAM_DRYOS 1
45 #define CAM_DRYOS_2_3_R39 1
46 #define CAM_DRYOS_2_3_R47 1
47 #define CAM_DRYOS_2_3_R59 1
48
49 #define CAM_HAS_CMOS 1
50
51 // unlocked by default, not needed
52 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
53 #define CAM_HAS_VIDEO_BUTTON 1
54
55 // framing assist = erase
56 // no dedicated DISP
57 // #undef CAM_HAS_ERASE_BUTTON
58 #undef CAM_USE_ZOOM_FOR_MF
59
60 // not implemented
61 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
62 #undef CAM_VIDEO_CONTROL
63
64 // minimal recording or not only
65 #define CAM_SIMPLE_MOVIE_STATUS 1
66
67 #define CAM_IS_VID_REC_WORKS 1 // Define if the 'is_video_recording()' function works
68
69 #define CAM_HAS_JOGDIAL 1
70 #undef CAM_USE_ZOOM_FOR_MF
71
72 #undef CAM_UNCACHED_BIT
73 #define CAM_UNCACHED_BIT 0x40000000
74
75 // default
76 // #define CAM_CIRCLE_OF_CONFUSION 5 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
77
78 #define CAM_DNG_LENS_INFO { 43,10,1720,10,33,10,69,10 }
79 #define cam_CFAPattern 0x02010100
80
81 // TODO C&P form sx60hs
82 #define cam_CalibrationIlluminant1 17
83
84 #define CAM_COLORMATRIX1 \
85 15686, 10000, -8326, 10000, -246, 10000, \
86 -1888, 10000, 10463, 10000, 1645, 10000, \
87 286, 10000, 708, 10000, 6145, 10000
88
89 #define cam_CalibrationIlluminant2 21 // D65
90
91 #define CAM_COLORMATRIX2 \
92 13161, 10000, -5451, 10000, -1344, 10000, \
93 -1989, 10000, 10654, 10000, 1531, 10000, \
94 -47, 10000, 1271, 10000, 4955, 10000
95 #define CAM_FORWARDMATRIX1 \
96 3002, 10000, 3390, 10000, 3251, 10000, \
97 1080, 10000, 6247, 10000, 2674, 10000, \
98 341, 10000, 42, 10000, 7868, 10000
99
100 #define CAM_FORWARDMATRIX2 \
101 3678, 10000, 4352, 10000, 1613, 10000, \
102 1429, 10000, 8091, 10000, 480, 10000, \
103 577, 10000, 26, 10000, 7648, 10000
104
105 #define CAM_RAW_ROWPIX 5344
106 #define CAM_RAW_ROWS 3950
107
108 #define CAM_JPEG_WIDTH 5184
109 #define CAM_JPEG_HEIGHT 3888
110
111 // sx730 verified identical to sx710
112 #define CAM_ACTIVE_AREA_X1 96 // normal level at 120
113 #define CAM_ACTIVE_AREA_Y1 18 // visible pixels start at 17, 18 to keep even, normal level at 22
114 #define CAM_ACTIVE_AREA_X2 5344 // active area extends to right
115 #define CAM_ACTIVE_AREA_Y2 3950 // active area extends to bottom of image
116
117 #define PARAM_CAMERA_NAME 3
118
119 // same as sx710 value found by calling GetImageFolder with single bits sets
120 #define CAM_DATE_FOLDER_NAMING 0x80
121
122 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
123
124 #undef CAM_SENSOR_BITS_PER_PIXEL
125 #define CAM_SENSOR_BITS_PER_PIXEL 12
126
127 #define CAM_EXT_TV_RANGE 1 // up to 1024s appears to be supported natively in firmware, exp_drv required for short exposure
128
129 #undef CAM_EXT_AV_RANGE
130 // up to APEX 850 F21.5 at max zoom, 640 F 10 at wide
131 #define CAM_EXT_AV_RANGE 9 // Number of 1/3 stop increments to extend the Av range beyond the Canon default smallest aperture
132
133 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
134
135 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 // Draw pixels on active bitmap buffer only.
136
137 // seems to be 640x480
138 #undef CAM_BITMAP_WIDTH
139 #undef CAM_BITMAP_HEIGHT
140 #undef CAM_SCREEN_WIDTH
141 #undef CAM_SCREEN_HEIGHT
142 #define CAM_BITMAP_WIDTH 640 // Actual width of bitmap screen in <s>bytes</s> pixels
143 #define CAM_BITMAP_HEIGHT 480 // Actual height of bitmap screen in rows
144 #define CAM_SCREEN_WIDTH 640 // Width of bitmap screen in CHDK co-ordinates (360 or 480 pre digic 6, actual width for digic 6)
145 #define CAM_SCREEN_HEIGHT 480 // Height of bitmap screen in CHDK co-ordinates (always 240 pre digic 6, actual height for digic 6)
146 #define CAM_SUPPORT_BITMAP_RES_CHANGE 1
147
148
149 // TODO
150 #undef EDGE_HMARGIN
151 #define EDGE_HMARGIN 10
152
153 // TODO SX730 doesn't have filewrite task
154 // #define CAM_HAS_FILEWRITETASK_HOOK 1
155 // doesn't appear to use complicated multi pass or seek in normal cases
156 //#define CAM_FILEWRITETASK_SEEKS 1
157
158 #undef CAM_BITMAP_PALETTE
159 #define CAM_BITMAP_PALETTE 100
160
161 #define CAM_ZEBRA_NOBUF 1
162
163 #undef CAMERA_MIN_DIST
164 #define CAMERA_MIN_DIST 10 // Override min subject distance, min get_focus() value using MF
165 #undef CAMERA_MAX_DIST
166 #define CAMERA_MAX_DIST 1818088 // Override max subject distance, max get_focus() value at max zoom using MF before it goes to -1
167
168 //#define CAM_CHDK_HAS_EXT_VIDEO_TIME 1
169
170 #undef CAM_USB_EVENTID
171 #define CAM_USB_EVENTID 0x302 // Levent ID for USB control.
172
173 // #define CAM_HAS_MOVIE_DIGEST_MODE 1
174
175 // didn't try default default values
176 // ignored with above
177 // #define CAM_NEED_SET_ZOOM_DELAY 300
178
179 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
180
181 #undef REMOTE_SYNC_STATUS_LED
182 // #define REMOTE_SYNC_STATUS_LED 0xC022C30C // TODO specifies an LED that turns on while camera waits for USB remote to sync
183 #define CAM_REMOTE_HDMI_HPD 1 // Camera supports using HDMI hotplug detect for remote signal
184 #define CAM_REMOTE_HDMI_POWER_OVERRIDE 1 // Camera requires HDMI power to be forced on in rec mode
185 // #define CAM_REMOTE_AtoD_CHANNEL 3 // Camera supports using 3rd battery terminal as well as USB for remote - value = A/D channel to poll
186 // sx710 - Open circuit = ~4090, 10k ohm = ~1380?, 3.5k = ~600 (56C as bat temp)
187 // #undef CAM_REMOTE_AtoD_THRESHOLD
188 // #define CAM_REMOTE_AtoD_THRESHOLD 800 // 3rd battery terminal A/D reading threshold ( lower = 1, higher = 0 )
189
190 // camera crashes if sd override used in AF
191 // #define CAM_SD_OVER_IN_AF 1
192 #define CAM_SD_OVER_IN_AFL 1
193 #define CAM_SD_OVER_IN_MF 1
194
195 // AF led, for MD test code
196 #undef CAM_AF_LED
197 #define CAM_AF_LED 1
198
199 #define CAM_HAS_WIFI 1 // Camera has wifi support
200
201 //--------------------------------------------------