1 // Camera - a470 - platform_camera.h
2
3 // This file contains the various settings values specific to the a470 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24 #define CAM_DRYOS 1
25
26 #define CAM_RAW_ROWPIX 3152
27 #define CAM_RAW_ROWS 2346 // correct firmware value matches raw size, was previously 2340
28
29 #undef CAM_USE_ZOOM_FOR_MF
30 #undef CAM_HAS_ZOOM_LEVER
31 #undef CAM_HAS_ERASE_BUTTON
32 #undef CAM_HAS_DISP_BUTTON // Camera does not have DISP button
33 #undef CAM_HAS_IRIS_DIAPHRAGM
34 #define CAM_HAS_ND_FILTER 1
35 #undef CAM_HAS_MANUAL_FOCUS
36 #undef CAM_HAS_USER_TV_MODES
37 #define CAM_HAS_HI_ISO_AUTO_MODE 1
38 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
39 #undef CAM_HAS_IS
40 #define CAM_CAN_MUTE_MICROPHONE 1
41 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
42 #define CAM_EV_IN_VIDEO 1
43 #define CAM_MULTIPART 1
44
45 #define CAM_DNG_LENS_INFO { 63,10, 216,10, 30,10, 58,10 } // See comments in camera.h
46 // pattern
47 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
48 // color
49 #define CAM_COLORMATRIX1 \
50 673251, 1000000, -200684, 1000000, -98680, 1000000, \
51 -163638, 1000000, 651247, 1000000, 74004, 1000000, \
52 14221, 1000000, 52979, 1000000, 265291, 1000000
53 #define cam_CalibrationIlluminant1 1 // Daylight
54 // cropping
55 #define CAM_JPEG_WIDTH 3096
56 #define CAM_JPEG_HEIGHT 2324
57 #define CAM_ACTIVE_AREA_X1 12
58 #define CAM_ACTIVE_AREA_Y1 8
59 #define CAM_ACTIVE_AREA_X2 3108
60 #define CAM_ACTIVE_AREA_Y2 2332
61 // camera name
62 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
63
64 #define CAM_HAS_FILEWRITETASK_HOOK 1
65
66 //#define DNG_EXT_FROM ".DPS"
67
68 #define REMOTE_SYNC_STATUS_LED 0xc0220084 // specifies an LED that turns on while camera waits for USB remote to sync
69
70 #define CAM_OPTIONAL_EXTRA_BUTTON 1 // allow the Power button to be remapped in ALT mode
71 #define CAM_EXTRA_BUTTON_NAMES { "OFF", "Display" }
72 #define CAM_EXTRA_BUTTON_OPTIONS { 0, KEY_DISPLAY }
73
74 #define CAM_SD_OVER_IN_AF 1
75 #define CAM_SD_OVER_IN_AFL 1
76 #define CAM_SD_OVER_IN_MF 1
77
78 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
79
80 //--------------------------------------------------
81
82 #undef CAM_DEFAULT_MENU_CURSOR_BG
83 #undef CAM_DEFAULT_MENU_CURSOR_FG
84 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
85 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors