1 // Camera - ixus100_sd780 - platform_camera.h
2
3 // This file contains the various settings values specific to the ixus100_sd780 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24 #define CAM_DRYOS 1
25
26 #define CAM_RAW_ROWPIX 4080 // 12 MP 12bpp
27 #define CAM_RAW_ROWS 3048 // VERIFY_SD780 Found RAW #s by searching " CrwAddress %lx, CrwSize H %ld V %ld\r"
28
29 #undef CAM_HAS_ERASE_BUTTON
30 #undef CAM_USE_ZOOM_FOR_MF
31 #define CAM_MULTIPART 1
32 #undef CAM_HAS_IRIS_DIAPHRAGM
33 #define CAM_HAS_ND_FILTER 1
34 #undef CAM_HAS_MANUAL_FOCUS
35 #undef CAM_HAS_USER_TV_MODES
36
37 #define CAM_ADJUSTABLE_ALT_BUTTON 1
38 #define CAM_ALT_BUTTON_NAMES {"Playback", "Display" }
39 #define CAM_ALT_BUTTON_OPTIONS {KEY_PLAYBACK, KEY_DISPLAY }
40
41 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
42 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
43
44 #undef CAM_VIDEO_CONTROL
45 #define CAM_VIDEO_QUALITY_ONLY 1
46
47 #undef CAM_UNCACHED_BIT
48 #define CAM_UNCACHED_BIT 0x40000000
49
50 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
51
52 #define CAM_QUALITY_OVERRIDE 1
53 #undef CAM_SENSOR_BITS_PER_PIXEL
54 #define CAM_SENSOR_BITS_PER_PIXEL 12
55
56 #define CAM_DNG_LENS_INFO { 59,10, 179,10, 32,10, 58,10 } // See comments in camera.h
57 // pattern
58 //RealRom:FFA99FB4 ADR R0, aObRG1G2BLdLdLd ; "\n OB : (R, G1, G2, B) = (%ld, %ld, %ld"...
59 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
60
61 // color preliminary (see DNG4PS2 wiki)
62 #define CAM_COLORMATRIX1 \
63 661840, 1000000, -185671, 1000000, -97110, 1000000, \
64 -83661, 1000000, 578860, 1000000, 32308, 1000000, \
65 -8681, 1000000, 70356, 1000000, 207341, 1000000
66
67 //Here is an alternate CAM_COLORMATRIX1 - Current one is nice for me but hey I'm no colour expert.
68 //XYZ -> Camera matrix:
69 //0.459395 -0.129083 -0.068085
70 //-0.055837 0.400827 0.020378
71 //-0.004622 0.048662 0.139970
72
73 #define cam_CalibrationIlluminant1 17 // Standard Light A
74
75 // cropping
76 #define CAM_JPEG_WIDTH 4000
77 #define CAM_JPEG_HEIGHT 3000
78 #define CAM_ACTIVE_AREA_X1 40
79 #define CAM_ACTIVE_AREA_Y1 24
80 #define CAM_ACTIVE_AREA_X2 4056
81 #define CAM_ACTIVE_AREA_Y2 3040
82 // camera name
83 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData sd990: OK
84
85 #undef CAM_USES_ASPECT_CORRECTION
86 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
87 #undef CAM_BITMAP_WIDTH
88 #undef CAM_BITMAP_HEIGHT
89 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes
90 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows
91
92 // camera has little free memory
93 #define CAM_ZEBRA_NOBUF 1
94
95 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
96 // Used to enabled bracketing in custom timer, required on many recent cameras
97 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
98
99 #define CAM_HAS_FILEWRITETASK_HOOK 1
100
101 #define REMOTE_SYNC_STATUS_LED 0xC0220128 // specifies an LED that turns on while camera waits for USB remote to sync
102
103 #define CAM_SD_OVER_IN_AF 1
104 #define CAM_SD_OVER_IN_AFL 1
105 #define CAM_SD_OVER_IN_MF 1
106
107 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
108
109 #define CAM_PTP_USE_NATIVE_BUFFER 1 // use firmware buffers to avoid problems with uncached memory
110
111 //--------------------------------------------------