1 // Camera - ixus100_sd780 - platform_camera.h 2 3 // This file contains the various settings values specific to the ixus100_sd780 camera. 4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly. 5 6 // If adding a new settings value put a suitable default in 'include/camera.h', 7 // along with documentation on what the setting does and how to determine the correct value. 8 // If the setting should not have a default value then add it in 'include/camera.h' 9 // using the '#undef' directive along with appropriate documentation. 10 11 // Override any default values with your camera specific values in this file. Try and avoid 12 // having override values that are the same as the default value. 13 14 // When overriding a setting value there are two cases: 15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. 16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value 17 // followed by a '#define' to set the new value. 18 19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h' 20 // for information on each setting. If the default values are correct for your camera then 21 // don't override them again in here. 22 23 #define CAM_PROPSET 2 24 #define CAM_DRYOS 1 25 26 #define CAM_RAW_ROWPIX 4080 // 12 MP 12bpp 27 #define CAM_RAW_ROWS 3048 // VERIFY_SD780 Found RAW #s by searching " CrwAddress %lx, CrwSize H %ld V %ld\r" 28 29 #undef CAM_HAS_ERASE_BUTTON 30 #undef CAM_USE_ZOOM_FOR_MF 31 #define CAM_MULTIPART 1 32 #undef CAM_HAS_IRIS_DIAPHRAGM 33 #define CAM_HAS_ND_FILTER 1 34 #undef CAM_HAS_MANUAL_FOCUS 35 #undef CAM_HAS_USER_TV_MODES 36 37 #define CAM_ADJUSTABLE_ALT_BUTTON 1 38 #define CAM_ALT_BUTTON_NAMES {"Playback", "Display" } 39 #define CAM_ALT_BUTTON_OPTIONS {KEY_PLAYBACK, KEY_DISPLAY } 40 41 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1 42 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1 43 44 #undef CAM_VIDEO_CONTROL 45 #define CAM_VIDEO_QUALITY_ONLY 1 46 47 #undef CAM_UNCACHED_BIT 48 #define CAM_UNCACHED_BIT 0x40000000 49 50 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware 51 52 #define CAM_QUALITY_OVERRIDE 1 53 #undef CAM_SENSOR_BITS_PER_PIXEL 54 #define CAM_SENSOR_BITS_PER_PIXEL 12 55 56 #define CAM_DNG_LENS_INFO { 59,10, 179,10, 32,10, 58,10 } // See comments in camera.h 57 // pattern 58 //RealRom:FFA99FB4 ADR R0, aObRG1G2BLdLdLd ; "\n OB : (R, G1, G2, B) = (%ld, %ld, %ld"... 59 #define cam_CFAPattern 0x02010100 // Red Green Green Blue 60 61 // color preliminary (see DNG4PS2 wiki) 62 #define CAM_COLORMATRIX1 \ 63 661840, 1000000, -185671, 1000000, -97110, 1000000, \ 64 -83661, 1000000, 578860, 1000000, 32308, 1000000, \ 65 -8681, 1000000, 70356, 1000000, 207341, 1000000 66 67 //Here is an alternate CAM_COLORMATRIX1 - Current one is nice for me but hey I'm no colour expert. 68 //XYZ -> Camera matrix: 69 //0.459395 -0.129083 -0.068085 70 //-0.055837 0.400827 0.020378 71 //-0.004622 0.048662 0.139970 72 73 #define cam_CalibrationIlluminant1 17 // Standard Light A 74 75 // cropping 76 #define CAM_JPEG_WIDTH 4000 77 #define CAM_JPEG_HEIGHT 3000 78 #define CAM_ACTIVE_AREA_X1 40 79 #define CAM_ACTIVE_AREA_Y1 24 80 #define CAM_ACTIVE_AREA_X2 4056 81 #define CAM_ACTIVE_AREA_Y2 3040 82 // camera name 83 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData sd990: OK 84 85 #undef CAM_USES_ASPECT_CORRECTION 86 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized 87 #undef CAM_BITMAP_WIDTH 88 #undef CAM_BITMAP_HEIGHT 89 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes 90 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows 91 92 // camera has little free memory 93 #define CAM_ZEBRA_NOBUF 1 94 95 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer. 96 // Used to enabled bracketing in custom timer, required on many recent cameras 97 // see http://chdk.setepontos.com/index.php/topic,3994.405.html 98 99 #define CAM_HAS_FILEWRITETASK_HOOK 1 100 101 #define REMOTE_SYNC_STATUS_LED 0xC0220128 // specifies an LED that turns on while camera waits for USB remote to sync 102 103 #define CAM_SD_OVER_IN_AF 1 104 #define CAM_SD_OVER_IN_AFL 1 105 #define CAM_SD_OVER_IN_MF 1 106 107 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works 108 109 #define CAM_PTP_USE_NATIVE_BUFFER 1 // use firmware buffers to avoid problems with uncached memory 110 111 //--------------------------------------------------