1 // Camera - A2200 - platform_camera.h
2
3 // This file contains the various settings values specific to the A2200 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 // Sure values
24 //
25 #define CAM_DRYOS 1
26 #define CAM_PROPSET 4
27 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
28 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
29
30 #define CAM_RAW_ROWPIX 4416 // Found @0xff937b24
31 #define CAM_RAW_ROWS 3296 // Found @0xff937b2c
32
33 #undef CAM_UNCACHED_BIT
34 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff83a6a8
35
36 #define CAM_JPEG_WIDTH 4320
37 #define CAM_JPEG_HEIGHT 3240
38 #define CAM_ACTIVE_AREA_X1 16
39 // #define CAM_ACTIVE_AREA_Y1 29
40 #define CAM_ACTIVE_AREA_Y1 30
41 #define CAM_ACTIVE_AREA_X2 4352
42 // #define CAM_ACTIVE_AREA_Y2 3275
43 #define CAM_ACTIVE_AREA_Y2 3274
44
45 #define CAM_DNG_LENS_INFO { 50,10, 200,10, 28,10, 59,10 } // See comments in camera.h
46
47 // Almost sure values
48 //
49 #undef CAM_SENSOR_BITS_PER_PIXEL
50 #define CAM_SENSOR_BITS_PER_PIXEL 12
51
52 // #define cam_CFAPattern 0x01000201 // Green Blue Red Green
53 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
54
55 #define CAM_COLORMATRIX1 \
56 827547, 1000000, -290458, 1000000, -126086, 1000000, \
57 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
58 5181, 1000000, 48183, 1000000, 245014, 1000000
59
60 #define cam_CalibrationIlluminant1 1 // Daylight
61
62 #undef CAM_BITMAP_WIDTH
63 #define CAM_BITMAP_WIDTH 720
64
65 #undef CAM_USES_ASPECT_CORRECTION
66 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
67
68 #define CAM_ZEBRA_NOBUF 1
69
70 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
71
72 #define CAM_HAS_ND_FILTER 1
73
74 #define CAM_VIDEO_QUALITY_ONLY 1
75
76 #define CAM_DATE_FOLDER_NAMING 0x400
77
78 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
79
80 #undef CAM_HAS_IRIS_DIAPHRAGM
81
82 #undef CAM_HAS_ERASE_BUTTON
83
84 #undef CAM_HAS_IS // Camera does not have an image stabilizer
85
86 #undef CAM_HAS_MANUAL_FOCUS
87
88 #undef CAM_VIDEO_CONTROL
89
90 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
91
92 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
93
94 #define CAM_ADJUSTABLE_ALT_BUTTON 1 // ALT-button can be set from menu
95 #define CAM_ALT_BUTTON_NAMES { "Playback", "Face", "Disp" }
96 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_FACE, KEY_DISPLAY }
97
98 // Not sure values
99 //
100 //#undef CAM_USE_ZOOM_FOR_MF
101 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
102 #define CAM_NEED_SET_ZOOM_DELAY 300 // Define to add a delay after setting the zoom position
103 #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
104
105 #define CAM_CAN_MUTE_MICROPHONE 1
106
107 #define CAM_HAS_FILEWRITETASK_HOOK 1
108
109 #define CAM_SD_OVER_IN_AFL 1
110 #define CAM_SD_OVER_IN_MF 1
111
112 //--------------------------------------------------