1 // Camera - D30 - platform_camera.h
2
3 // This file contains the various settings values specific to the D30 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_DRYOS 1
24 #define CAM_PROPSET 5
25
26 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
27 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
28
29 #define CAM_RAW_ROWPIX 4168 // Found @0xff1469c4 d20
30 #define CAM_RAW_ROWS 3060 // Found @0xff1469d0 d20
31
32 #undef CAM_UNCACHED_BIT
33 #define CAM_UNCACHED_BIT 0x40000000
34
35 #define CAM_JPEG_WIDTH 4000
36 #define CAM_JPEG_HEIGHT 3000
37 #define CAM_ACTIVE_AREA_X1 92 // to image data, border extends to 120
38 #define CAM_ACTIVE_AREA_Y1 16 // to image data, border extends to 34
39 #define CAM_ACTIVE_AREA_X2 4164 // last image data, border at 4136
40 #define CAM_ACTIVE_AREA_Y2 3060 // image data extends to bottom, border starts 3042?
41
42 #define CAM_DNG_LENS_INFO { 50,10, 250,10, 39,10, 48,10 } // See comments in camera.h
43
44 #undef CAM_SENSOR_BITS_PER_PIXEL
45 #define CAM_SENSOR_BITS_PER_PIXEL 12
46
47 #define cam_CFAPattern 0x02010100 // [Red Green Green Blue]
48
49 #define CAM_COLORMATRIX1 \
50 827547, 1000000, -290458, 1000000, -126086, 1000000, \
51 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
52 5181, 1000000, 48183, 1000000, 245014, 1000000
53
54 #define cam_CalibrationIlluminant1 1 // Daylight
55
56 #undef CAM_USES_ASPECT_CORRECTION
57 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
58 #undef CAM_BITMAP_WIDTH
59 #undef CAM_BITMAP_HEIGHT
60 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes
61 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows
62 #undef EDGE_HMARGIN
63 #define EDGE_HMARGIN 10
64
65 #define CAM_HAS_FILEWRITETASK_HOOK 1
66 #define CAM_FILEWRITETASK_SEEKS 1
67
68 #define CAM_ZEBRA_NOBUF 1
69
70 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
71
72 #define CAM_HAS_ND_FILTER 1
73
74 #define CAM_EXT_TV_RANGE 1
75
76 #define CAM_HAS_VIDEO_BUTTON 1
77 #undef CAM_VIDEO_CONTROL
78 #define CAM_VIDEO_QUALITY_ONLY 1
79
80 #undef CAM_HAS_IRIS_DIAPHRAGM
81 #undef CAM_HAS_ERASE_BUTTON
82 #undef CAM_HAS_IS // Camera does not have an image stabilizer
83 #undef CAM_HAS_MANUAL_FOCUS
84
85 #define CAM_HAS_GPS 1
86
87 #define CAM_HAS_MOVIE_DIGEST_MODE 1
88
89 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
90
91 #undef CAM_DEFAULT_ALT_BUTTON
92 #define CAM_DEFAULT_ALT_BUTTON KEY_PLAYBACK
93 #undef CAM_HAS_DISP_BUTTON
94 #define CAM_DISP_BUTTON_NAME "Video"
95 #define SHORTCUT_TOGGLE_RAW KEY_VIDEO
96
97 #define CAM_FIRMWARE_MEMINFO 1
98
99 // TO DO
100 #define CAM_HAS_ZOOM_LEVER 1 // Camera has dedicated zoom buttons
101 // #define CAM_USE_ZOOM_FOR_MF 1 // Zoom lever can be used for manual focus adjustments
102 #define CAM_NEED_SET_ZOOM_DELAY 300 // Define to add a delay after setting the zoom position
103 #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoo
104
105 #define CAM_QUALITY_OVERRIDE 1
106 #define CAM_DATE_FOLDER_NAMING 0x400
107
108 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1
109
110 #undef CAM_USB_EVENTID
111 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
112 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
113
114 // #define REMOTE_SYNC_STATUS_LED 0xC0220130 // TODO specifies an LED that turns on while camera waits for USB remote to sync
115
116 #define CAM_SD_OVER_IN_AF 1
117 #define CAM_SD_OVER_IN_MF 1
118
119 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
120
121 //--------------------------------------------------