1 // Camera - A2600 - platform_camera.h
2
3 // This file contains the various settings values specific to the A2500 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_DRYOS 1
24 #define CAM_PROPSET 6
25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher
26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher
27
28 #define CAM_RAW_ROWPIX 4704 // Found @0xff945828
29 #define CAM_RAW_ROWS 3504 // Found @0xff945834
30
31 #undef CAM_UNCACHED_BIT
32 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff83200c
33
34 #define CAM_JPEG_WIDTH 4608 //To do
35 #define CAM_JPEG_HEIGHT 3456 //To do
36 #define CAM_ACTIVE_AREA_X1 16 //To do
37 #define CAM_ACTIVE_AREA_Y1 26 //To do
38 #define CAM_ACTIVE_AREA_X2 4640 //To do
39 #define CAM_ACTIVE_AREA_Y2 3486 //To do
40
41 #define CAM_DNG_LENS_INFO { 50,10, 250,10, 28,10, 69,10 } // See comments in camera.h
42
43 #undef CAM_SENSOR_BITS_PER_PIXEL
44 #define CAM_SENSOR_BITS_PER_PIXEL 12
45
46 #define cam_CFAPattern 0x01000201 // [Green Blue Red Green]
47
48 //TODO
49 #define CAM_COLORMATRIX1 \
50 827547, 1000000, -290458, 1000000, -126086, 1000000, \
51 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
52 5181, 1000000, 48183, 1000000, 245014, 1000000
53 #define cam_CalibrationIlluminant1 1 // Daylight
54
55 // no separate erase button
56 #undef CAM_HAS_ERASE_BUTTON
57 #undef CAM_HAS_DISP_BUTTON
58
59 #define CAM_ZEBRA_NOBUF 1
60
61 #define PARAM_CAMERA_NAME 3 // parameter number for GetParameterData
62
63 #define CAM_HAS_ND_FILTER 1
64
65 #define CAM_HAS_VIDEO_BUTTON 1
66 #undef CAM_VIDEO_CONTROL
67 #define CAM_VIDEO_QUALITY_ONLY 1
68
69 #define CAM_DATE_FOLDER_NAMING 0x80
70
71 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1
72
73 #undef CAM_HAS_IRIS_DIAPHRAGM
74
75 #undef CAM_HAS_IS // Camera does not have an image stabilizer
76
77 #undef CAM_HAS_MANUAL_FOCUS
78 #undef CAM_USE_ZOOM_FOR_MF
79
80 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
81
82 //To do
83 #undef CAM_USES_ASPECT_CORRECTION
84 #define CAM_USES_ASPECT_CORRECTION 1
85 #undef CAM_BITMAP_WIDTH
86 #define CAM_BITMAP_WIDTH 720 // Actual width of bitmap screen in bytes
87
88 #define CAM_ADJUSTABLE_ALT_BUTTON 1 // ALT-button can be set from menu
89 #define CAM_ALT_BUTTON_NAMES { "Playback", "Help" }
90 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_HELP }
91
92 #define CAM_HAS_FILEWRITETASK_HOOK 1
93 #define CAM_FILEWRITETASK_SEEKS 1
94
95 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
96
97 //To do
98 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param
99
100 #define CAM_QUALITY_OVERRIDE 1
101
102 #undef CAM_USB_EVENTID
103 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
104 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail.
105
106 #define REMOTE_SYNC_STATUS_LED 0xC0220094 // specifies an LED that turns on while camera waits for USB remote to sync
107
108 // #undef CAM_AF_LED
109 // #define CAM_AF_LED 0 // Index of AF led in camera_set_led function
110
111 #define CAM_SD_OVER_IN_AF 1
112 #define CAM_SD_OVER_IN_AFL 1
113 #define CAM_SD_OVER_IN_MF 1
114
115 //--------------------------------------------------