1 // Camera - sx510hs - platform_camera.h 2 3 // This file contains the various settings values specific to the sx510hs camera. 4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly. 5 6 // If adding a new settings value put a suitable default in 'include/camera.h', 7 // along with documentation on what the setting does and how to determine the correct value. 8 // If the setting should not have a default value then add it in 'include/camera.h' 9 // using the '#undef' directive along with appropriate documentation. 10 11 // Override any default values with your camera specific values in this file. Try and avoid 12 // having override values that are the same as the default value. 13 14 // When overriding a setting value there are two cases: 15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. 16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value 17 // followed by a '#define' to set the new value. 18 19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h' 20 // for information on each setting. If the default values are correct for your camera then 21 // don't override them again in here. 22 23 #define CAM_PROPSET 6 24 #define CAM_DRYOS 1 25 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher 26 #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher 27 28 #undef CAM_CIRCLE_OF_CONFUSION 29 #define CAM_CIRCLE_OF_CONFUSION 6 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html) 30 31 #define CAM_RAW_ROWPIX 4168 // Found @0xff196e7c 32 #define CAM_RAW_ROWS 3062 // Found @0xff196e88 33 34 #define CAM_JPEG_WIDTH 4000 // from canon specs 35 #define CAM_JPEG_HEIGHT 3000 36 37 #define CAM_ACTIVE_AREA_X1 96 38 #define CAM_ACTIVE_AREA_Y1 18 // there are values at 17 but keep even to avoid CFA issues 39 #define CAM_ACTIVE_AREA_X2 4168 // active all the way to the edge 40 #define CAM_ACTIVE_AREA_Y2 3062 // active all the way to the bottom 41 42 #undef CAM_UNCACHED_BIT 43 #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff005f4c 44 45 #undef CAM_SENSOR_BITS_PER_PIXEL 46 #define CAM_SENSOR_BITS_PER_PIXEL 12 47 48 #define CAM_DNG_LENS_INFO { 43,10, 1290, 10, 34,10, 58,10 } // See comments in camera.h 49 50 #define cam_CFAPattern 0x02010100 // Red Green Green Blue 51 52 // TODO C&P from D10 53 #define CAM_COLORMATRIX1 \ 54 14052, 10000, -5229, 10000, -1156, 10000, \ 55 -1325, 10000, 9420, 10000, 2252, 10000, \ 56 -498, 10000, 1957, 10000, 4116, 10000 57 #define cam_CalibrationIlluminant1 21 // D65 58 59 #undef CAM_USE_ZOOM_FOR_MF 60 61 #define CAM_HAS_VIDEO_BUTTON 1 62 63 // long shutter is actually user TV, may work ? 64 #undef CAM_HAS_USER_TV_MODES 65 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1 66 67 #undef CAM_VIDEO_CONTROL 68 // not working 69 #undef CAM_CHDK_HAS_EXT_VIDEO_MENU 70 // #define CAM_VIDEO_QUALITY_ONLY 1 71 // #define CAM_CHDK_HAS_EXT_VIDEO_MENU 1 72 #define CAM_HAS_MOVIE_DIGEST_MODE 1 //See http://chdk.setepontos.com/index.php?topic=9986.msg118892#msg118892 73 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works 74 75 // TODO 76 // #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1 77 78 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // unlocked in canon firmware by default 79 80 // MakeDirectory_Fut not found, using mkdir 81 #define MKDIR_RETURN_ONE_ON_SUCCESS 82 83 //aspect correction 84 #undef CAM_USES_ASPECT_CORRECTION 85 #define CAM_USES_ASPECT_CORRECTION 1 86 #undef CAM_BITMAP_WIDTH 87 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes (may be larger than displayed area) 88 #undef CAM_BITMAP_HEIGHT 89 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows (240 or 270) 90 91 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware 92 93 #define CAM_HAS_JOGDIAL 1 94 #define CAM_ADJUSTABLE_ALT_BUTTON 1 95 #define CAM_ALT_BUTTON_NAMES { "Playback", "Disp", "Video" } 96 #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_DISPLAY, KEY_VIDEO } 97 98 // TODO 99 #undef CAM_USB_EVENTID 100 #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable. 101 102 #define CAM_DATE_FOLDER_NAMING 0x80 103 104 #define PARAM_CAMERA_NAME 3 // parameter number for GetParameterData 105 106 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param 107 108 #define CAM_HAS_FILEWRITETASK_HOOK 1 // FileWriteTask hook is available (local file write can be prevented) 109 #define CAM_FILEWRITETASK_SEEKS 1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50 110 111 112 // only non-AF led available 113 #define REMOTE_SYNC_STATUS_LED 0xC022302C // specifies an LED that turns on while camera waits for USB remote to sync 114 115 #undef CAM_AF_LED 116 #define CAM_AF_LED 1 117 118 #undef CAM_KEY_PRESS_DELAY 119 #define CAM_KEY_PRESS_DELAY 120 // delay after a press - Required by zoom_in/zoom_out buttons 120 121 #define CAM_SD_OVER_IN_AF 1 122 #define CAM_SD_OVER_IN_AFL 1 123 #define CAM_SD_OVER_IN_MF 1 124 125 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 126 127 #define CAM_3ARG_DebugAssert 1 // DebugAssert takes 3 arguments 128 129 #define CAM_HAS_WIFI 1 // Camera has wifi support 130 131 //----------------------------------------------------------