1 // Camera - IXUS110_SD960 - platform_camera.h
2
3 // This file contains the various settings values specific to the IXUS110_SD960 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24 #define CAM_DRYOS 1
25
26 #define CAM_RAW_ROWPIX 4080 // Found @0xff8eb014
27 #define CAM_RAW_ROWS 3048 // Found @0xff8eb018
28
29 #undef CAM_HAS_ERASE_BUTTON
30 #define CAM_MULTIPART 1
31 #undef CAM_HAS_IRIS_DIAPHRAGM
32 #define CAM_HAS_ND_FILTER 1
33
34 // TODO
35 #undef CAM_HAS_MANUAL_FOCUS
36
37 //#define CAM_EV_IN_VIDEO 1
38
39 // long shutter is acutally user TV, may work ?
40 #undef CAM_HAS_USER_TV_MODES
41 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
42
43 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
44
45 #undef CAM_VIDEO_CONTROL
46 #define CAM_VIDEO_QUALITY_ONLY 1
47
48 #undef CAM_UNCACHED_BIT
49 #define CAM_UNCACHED_BIT 0x40000000
50
51 #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware
52
53 #define CAM_QUALITY_OVERRIDE 1
54 #undef CAM_SENSOR_BITS_PER_PIXEL
55 #define CAM_SENSOR_BITS_PER_PIXEL 12
56
57 #define CAM_HAS_JOGDIAL 1
58 #define CAM_FEATURE_FEATHER 1
59
60 #define CAM_DNG_LENS_INFO { 50,10, 200,10, 28,10, 58,10 } // See comments in camera.h
61
62 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
63 // color
64
65 #define CAM_COLORMATRIX1 \
66 764117, 1000000, -223884, 1000000, -116036, 1000000, \
67 -35875, 1000000, 582534, 1000000, 32982, 1000000, \
68 10441, 1000000, 64164, 1000000, 198520, 1000000
69 #define cam_CalibrationIlluminant1 1
70
71 #define CAM_JPEG_WIDTH 4000
72 #define CAM_JPEG_HEIGHT 3000
73 #define CAM_ACTIVE_AREA_X1 24 //
74 #define CAM_ACTIVE_AREA_Y1 12
75 #define CAM_ACTIVE_AREA_X2 4056 //
76 #define CAM_ACTIVE_AREA_Y2 3036 //
77
78 // camera name OK
79 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
80
81 //aspect correction
82 #undef CAM_USES_ASPECT_CORRECTION
83 #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
84
85 #undef CAM_SCREEN_WIDTH
86 #undef CAM_BITMAP_WIDTH
87 #undef CAM_BITMAP_HEIGHT
88 #define CAM_SCREEN_WIDTH 480 // Width of bitmap screen in CHDK co-ordinates
89 #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes
90 #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows
91
92 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer.
93 // Used to enabled bracketing in custom timer, required on many recent cameras
94 // see http://chdk.setepontos.com/index.php/topic,3994.405.html
95
96 #define CAM_HAS_FILEWRITETASK_HOOK 1
97
98 #define REMOTE_SYNC_STATUS_LED 0xc0220134 // specifies an LED that turns on while camera waits for USB remote to sync
99
100 #define CAM_OPTIONAL_EXTRA_BUTTON 1 // allow the Power button to be remapped in ALT mode
101 #define CAM_EXTRA_BUTTON_NAMES { "OFF", "Display" }
102 #define CAM_EXTRA_BUTTON_OPTIONS { 0, KEY_DISPLAY }
103 #undef CAM_DEFAULT_ALT_BUTTON
104 #define CAM_DEFAULT_ALT_BUTTON KEY_PLAYBACK
105
106 #define CAM_SD_OVER_IN_AF 1
107 #define CAM_SD_OVER_IN_AFL 1
108 #define CAM_SD_OVER_IN_MF 1
109
110 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
111 #define CAM_PTP_USE_NATIVE_BUFFER 1 // use firmware buffers to avoid problems with uncached memory
112 //--------------------------------------------------