root/platform/a2600/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - A2600 - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the A2500 camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_DRYOS                       1
  24     #define CAM_PROPSET                     6
  25     #define CAM_DRYOS_2_3_R39               1       // Defined for cameras with DryOS version R39 or higher
  26     #define CAM_DRYOS_2_3_R47               1       // Defined for cameras with DryOS version R47 or higher
  27 
  28     #define CAM_RAW_ROWPIX                  4704   // Found @0xff945828
  29     #define CAM_RAW_ROWS                    3504   // Found @0xff945834
  30 
  31     #undef  CAM_UNCACHED_BIT
  32     #define CAM_UNCACHED_BIT                0x40000000 // Found @0xff83200c
  33 
  34     #define CAM_JPEG_WIDTH                  4608    //To do
  35     #define CAM_JPEG_HEIGHT                 3456    //To do
  36     #define CAM_ACTIVE_AREA_X1              16      //To do
  37     #define CAM_ACTIVE_AREA_Y1              26      //To do
  38     #define CAM_ACTIVE_AREA_X2              4640    //To do
  39     #define CAM_ACTIVE_AREA_Y2              3486    //To do
  40 
  41     #define CAM_DNG_LENS_INFO               { 50,10, 250,10, 28,10, 69,10 } // See comments in camera.h
  42 
  43     #undef  CAM_SENSOR_BITS_PER_PIXEL
  44     #define CAM_SENSOR_BITS_PER_PIXEL       12
  45 
  46     #define cam_CFAPattern                  0x01000201   // [Green Blue Red Green]
  47 
  48     //TODO
  49     #define CAM_COLORMATRIX1                             \
  50     827547, 1000000, -290458, 1000000, -126086, 1000000, \
  51     -12829, 1000000,  530507, 1000000,   50537, 1000000, \
  52       5181, 1000000,   48183, 1000000,  245014, 1000000
  53     #define cam_CalibrationIlluminant1      1       // Daylight
  54 
  55     // no separate erase button
  56     #undef  CAM_HAS_ERASE_BUTTON
  57     #undef  CAM_HAS_DISP_BUTTON
  58 
  59     #define CAM_ZEBRA_NOBUF                 1
  60 
  61     #define PARAM_CAMERA_NAME               3       // parameter number for GetParameterData
  62 
  63     #define CAM_HAS_ND_FILTER               1
  64 
  65     #define CAM_HAS_VIDEO_BUTTON            1
  66     #undef  CAM_VIDEO_CONTROL
  67     #define CAM_VIDEO_QUALITY_ONLY          1
  68 
  69     #define CAM_DATE_FOLDER_NAMING          0x80
  70 
  71     #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1
  72 
  73     #undef  CAM_HAS_IRIS_DIAPHRAGM
  74 
  75     #undef  CAM_HAS_IS                              // Camera does not have an image stabilizer
  76 
  77     #undef  CAM_HAS_MANUAL_FOCUS
  78     #undef  CAM_USE_ZOOM_FOR_MF
  79 
  80     #define CAM_LOAD_CUSTOM_COLORS          1       // Enable loading CHDK colors into the camera palette memory/hardware
  81 
  82     //To do
  83     #undef  CAM_USES_ASPECT_CORRECTION
  84     #define CAM_USES_ASPECT_CORRECTION      1
  85     #undef  CAM_BITMAP_WIDTH
  86     #define CAM_BITMAP_WIDTH                720   // Actual width of bitmap screen in bytes
  87 
  88     #define CAM_ADJUSTABLE_ALT_BUTTON       1   // ALT-button can be set from menu
  89     #define CAM_ALT_BUTTON_NAMES            { "Playback", "Help" }
  90     #define CAM_ALT_BUTTON_OPTIONS          { KEY_PLAYBACK, KEY_HELP }
  91 
  92     #define CAM_HAS_FILEWRITETASK_HOOK      1
  93     #define CAM_FILEWRITETASK_SEEKS         1
  94 
  95     #undef  CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
  96     #define CAM_USE_ALT_SET_ZOOM_POINT      1       // Define to use the alternate code in lens_set_zoom_point()
  97     #define CAM_USE_ALT_PT_MoveOpticalZoomAt 1      // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
  98 
  99 //To do
 100     #define CAM_FILE_COUNTER_IS_VAR         1       // file counter is variable file_counter_var in stubs, not a param
 101 
 102     #define CAM_QUALITY_OVERRIDE            1
 103 
 104     #undef  CAM_USB_EVENTID
 105     #define CAM_USB_EVENTID                 0x202   // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
 106     #define MKDIR_RETURN_ONE_ON_SUCCESS     1       // mkdir() return 1 on success, 0 on fail.
 107 
 108     #define REMOTE_SYNC_STATUS_LED 0xC0220094       // specifies an LED that turns on while camera waits for USB remote to sync
 109 
 110 //    #undef  CAM_AF_LED
 111 //    #define CAM_AF_LED                          0   // Index of AF led in camera_set_led function
 112 
 113     #define CAM_SD_OVER_IN_AF               1
 114     #define CAM_SD_OVER_IN_AFL              1
 115     #define CAM_SD_OVER_IN_MF               1
 116 
 117 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */