root/platform/sx510hs/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - sx510hs - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the sx510hs camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_PROPSET                     6
  24     #define CAM_DRYOS                       1
  25     #define CAM_DRYOS_2_3_R39               1 // Defined for cameras with DryOS version R39 or higher
  26     #define CAM_DRYOS_2_3_R47               1 // Defined for cameras with DryOS version R47 or higher
  27 
  28     #undef  CAM_CIRCLE_OF_CONFUSION
  29     #define CAM_CIRCLE_OF_CONFUSION         6   // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
  30 
  31     #define CAM_RAW_ROWPIX                  4168 // Found @0xff196e7c
  32     #define CAM_RAW_ROWS                    3062 // Found @0xff196e88
  33 
  34     #define CAM_JPEG_WIDTH                  4000 // from canon specs
  35     #define CAM_JPEG_HEIGHT                 3000 
  36 
  37     #define CAM_ACTIVE_AREA_X1              96
  38     #define CAM_ACTIVE_AREA_Y1              18 // there are values at 17 but keep even to avoid CFA issues
  39     #define CAM_ACTIVE_AREA_X2              4168 // active all the way to the edge
  40     #define CAM_ACTIVE_AREA_Y2              3062 // active all the way to the bottom
  41 
  42     #undef  CAM_UNCACHED_BIT
  43     #define CAM_UNCACHED_BIT                0x40000000 // Found @0xff005f4c
  44 
  45     #undef CAM_SENSOR_BITS_PER_PIXEL
  46     #define CAM_SENSOR_BITS_PER_PIXEL       12
  47 
  48     #define CAM_DNG_LENS_INFO               { 43,10, 1290, 10, 34,10, 58,10 } // See comments in camera.h
  49 
  50     #define cam_CFAPattern                  0x02010100 // Red Green Green Blue
  51 
  52     // TODO C&P from D10
  53     #define CAM_COLORMATRIX1                        \
  54       14052, 10000,   -5229, 10000,   -1156, 10000, \
  55       -1325, 10000,    9420, 10000,    2252, 10000, \
  56        -498, 10000,    1957, 10000,    4116, 10000
  57     #define cam_CalibrationIlluminant1      21      // D65
  58 
  59     #undef  CAM_USE_ZOOM_FOR_MF
  60 
  61     #define CAM_HAS_VIDEO_BUTTON            1
  62 
  63     // long shutter is actually user TV, may work ?
  64     #undef  CAM_HAS_USER_TV_MODES
  65     #define CAM_SHOW_OSD_IN_SHOOT_MENU      1
  66 
  67     #undef  CAM_VIDEO_CONTROL
  68 // not working
  69     #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
  70 //    #define CAM_VIDEO_QUALITY_ONLY            1
  71 //    #define CAM_CHDK_HAS_EXT_VIDEO_MENU       1
  72     #define CAM_HAS_MOVIE_DIGEST_MODE       1   //See http://chdk.setepontos.com/index.php?topic=9986.msg118892#msg118892
  73     #define CAM_IS_VID_REC_WORKS            1   // is_video_recording() function works    
  74 
  75     #define CAM_DISABLE_RAW_IN_MOVIE_DIGEST 1 // Camera locks up while saving raw in "Movie Digest" mode https://chdk.setepontos.com/index.php?topic=10984.msg128913#msg128913
  76 
  77     // TODO
  78 //    #define CAM_AF_SCAN_DURING_VIDEO_RECORD   1
  79 
  80     #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO  // unlocked in canon firmware by default
  81 
  82     // MakeDirectory_Fut not found, using mkdir
  83     #define MKDIR_RETURN_ONE_ON_SUCCESS
  84 
  85     //aspect correction
  86     #undef  CAM_USES_ASPECT_CORRECTION
  87     #define CAM_USES_ASPECT_CORRECTION      1
  88     #undef  CAM_BITMAP_WIDTH
  89     #define CAM_BITMAP_WIDTH                960 // Actual width of bitmap screen in bytes (may be larger than displayed area)
  90     #undef  CAM_BITMAP_HEIGHT
  91     #define CAM_BITMAP_HEIGHT               270 // Actual height of bitmap screen in rows (240 or 270)
  92 
  93     #define CAM_LOAD_CUSTOM_COLORS          1     // Enable loading CHDK colors into the camera palette memory/hardware
  94 
  95     #define CAM_HAS_JOGDIAL                 1
  96     #define CAM_ADJUSTABLE_ALT_BUTTON       1
  97     #define CAM_ALT_BUTTON_NAMES            { "Playback", "Disp", "Video" }
  98     #define CAM_ALT_BUTTON_OPTIONS          { KEY_PLAYBACK, KEY_DISPLAY, KEY_VIDEO }
  99 
 100     // TODO
 101     #undef  CAM_USB_EVENTID
 102     #define CAM_USB_EVENTID                 0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.
 103 
 104     #define CAM_DATE_FOLDER_NAMING          0x80
 105 
 106     #define PARAM_CAMERA_NAME               3 // parameter number for GetParameterData
 107 
 108     #define CAM_FILE_COUNTER_IS_VAR         1 // file counter is variable file_counter_var in stubs, not a param
 109 
 110     #define  CAM_HAS_FILEWRITETASK_HOOK     1 // FileWriteTask hook is available (local file write can be prevented)
 111     #define  CAM_FILEWRITETASK_SEEKS        1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50
 112 
 113     #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
 114     #define CAM_USE_ALT_SET_ZOOM_POINT      1 // Define to use the alternate code in lens_set_zoom_point()
 115     #define CAM_USE_ALT_PT_MoveOpticalZoomAt 1 // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
 116 
 117 //  only non-AF led available
 118     #define REMOTE_SYNC_STATUS_LED          0xC022302C  // specifies an LED that turns on while camera waits for USB remote to sync
 119 
 120     #undef CAM_AF_LED
 121     #define CAM_AF_LED                      1
 122 
 123     #undef  CAM_KEY_PRESS_DELAY
 124     #define CAM_KEY_PRESS_DELAY             120  // delay after a press - Required by zoom_in/zoom_out buttons
 125 
 126     #define CAM_SD_OVER_IN_AF               1
 127     #define CAM_SD_OVER_IN_AFL              1
 128     #define CAM_SD_OVER_IN_MF               1
 129 
 130     #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1
 131 
 132     #define CAM_3ARG_DebugAssert                1   // DebugAssert takes 3 arguments
 133 
 134 //----------------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */