1 // Camera - ixus700_sd500 - platform_camera.h
2
3 // This file contains the various settings values specific to the ixus700_sd500 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 1
24
25 #define CAM_RAW_ROWPIX 3152 // for 7 MP
26 #define CAM_RAW_ROWS 2340 // for 7 MP
27
28 #undef CAM_CIRCLE_OF_CONFUSION
29 #define CAM_CIRCLE_OF_CONFUSION 6 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)
30
31 #undef CAM_USE_ZOOM_FOR_MF
32 #define CAM_DRAW_EXPOSITION 1
33 #undef CAM_HAS_ERASE_BUTTON
34 #undef CAM_HAS_IRIS_DIAPHRAGM
35 #define CAM_HAS_ND_FILTER 1
36 #undef CAM_HAS_MANUAL_FOCUS
37 #undef CAM_HAS_USER_TV_MODES
38 #define CAM_SHOW_OSD_IN_SHOOT_MENU 1
39 #undef CAM_HAS_IS
40 #define CAM_MULTIPART 1
41 #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
42
43 #define CAM_DNG_LENS_INFO { 77,10, 231,10, 28,10, 49,10 } // See comments in camera.h
44 // pattern
45 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
46 // color
47 #define CAM_COLORMATRIX1 \
48 15265, 1, -6193, 1, -1558, 1, \
49 -4125, 1, 12116, 1, 2010, 1, \
50 -888, 1, 1639, 1, 5220, 1
51
52 #define cam_CalibrationIlluminant1 17 // Standard light A
53 // cropping
54 #define CAM_JPEG_WIDTH 3072
55 #define CAM_JPEG_HEIGHT 2304
56 #define CAM_ACTIVE_AREA_X1 38
57 #define CAM_ACTIVE_AREA_Y1 14
58 #define CAM_ACTIVE_AREA_X2 3146
59 #define CAM_ACTIVE_AREA_Y2 2338
60 // camera name
61 #define PARAM_CAMERA_NAME 2 // parameter number for GetParameterData
62 #define DNG_EXT_FROM ".DPS"
63
64 // #define REMOTE_SYNC_STATUS_LED 0xC0xxyyyy // specifies an LED that turns on while camera waits for USB remote to sync
65
66 #define CAM_WAIT_FOR_FILESYSTEM 1 // wait for 'file_system_started' on startup
67
68 // "real" to "market" conversion definitions
69 #define SV96_MARKET_OFFSET 20 // market-real sv96 conversion value
70
71 // Conversion values for pow(2,-20/96) 'market' to 'real', and pow(2,20/96) 'real' to 'market'
72 // Uses integer arithmetic to avoid floating point calculations. Values choses to get as close
73 // to the desired multiplication factor as possible within normal ISO range.
74 #define ISO_MARKET_TO_REAL_MULT 3545
75 #define ISO_MARKET_TO_REAL_SHIFT 12
76 #define ISO_MARKET_TO_REAL_ROUND 2048
77 #define ISO_REAL_TO_MARKET_MULT 9465
78 #define ISO_REAL_TO_MARKET_SHIFT 13
79 #define ISO_REAL_TO_MARKET_ROUND 4096
80
81 #undef CAM_PTP_SCREEN_UNLOCK_EVENT // cam doesn't have cameracon_state identified
82
83 //--------------------------------------------------