1 // Camera - sx10 - platform_camera.h
2
3 // This file contains the various settings values specific to the sx10 camera.
4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
5
6 // If adding a new settings value put a suitable default in 'include/camera.h',
7 // along with documentation on what the setting does and how to determine the correct value.
8 // If the setting should not have a default value then add it in 'include/camera.h'
9 // using the '#undef' directive along with appropriate documentation.
10
11 // Override any default values with your camera specific values in this file. Try and avoid
12 // having override values that are the same as the default value.
13
14 // When overriding a setting value there are two cases:
15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
17 // followed by a '#define' to set the new value.
18
19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
20 // for information on each setting. If the default values are correct for your camera then
21 // don't override them again in here.
22
23 #define CAM_PROPSET 2
24 #define CAM_DRYOS 1
25
26 #define CAM_RAW_ROWPIX 3720
27 #define CAM_RAW_ROWS 2772
28
29 #define CAM_SWIVEL_SCREEN 1
30 #define CAM_ADJUSTABLE_ALT_BUTTON 1
31 #define CAM_ALT_BUTTON_NAMES { "Shrtcut", "Flash", "Video" }
32 #define CAM_ALT_BUTTON_OPTIONS { KEY_PRINT, KEY_FLASH, KEY_VIDEO }
33 #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
34 #define CAM_HAS_VIDEO_BUTTON 1
35 #define CAM_VIDEO_QUALITY_ONLY 1
36 #define CAM_BRACKETING 1
37 #undef CAM_VIDEO_CONTROL
38 #define CAM_MULTIPART 1
39 #define CAM_HAS_JOGDIAL 1
40 #define CAM_HAS_HI_ISO_AUTO_MODE 1
41 #undef CAM_USE_ZOOM_FOR_MF
42 #undef CAM_UNCACHED_BIT // shut up compiler
43 #define CAM_UNCACHED_BIT 0x40000000
44
45 #define CAM_DNG_LENS_INFO { 50,10, 100,10, 28,10, 57,10 } // See comments in camera.h
46 // pattern
47 #define cam_CFAPattern 0x02010100 // Red Green Green Blue
48 // color
49
50 #define CAM_COLORMATRIX1 \
51 827547, 1000000, -290458, 1000000, -126086, 1000000, \
52 -12829, 1000000, 530507, 1000000, 50537, 1000000, \
53 5181, 1000000, 48183, 1000000, 245014, 1000000
54
55 #define cam_CalibrationIlluminant1 1 // Daylight
56 // cropping
57 #define CAM_JPEG_WIDTH 3648
58 #define CAM_JPEG_HEIGHT 2736
59 #define CAM_ACTIVE_AREA_X1 6
60 #define CAM_ACTIVE_AREA_Y1 12
61 #define CAM_ACTIVE_AREA_X2 3690
62 #define CAM_ACTIVE_AREA_Y2 2772
63 // camera name
64 #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData
65
66 #undef CAM_SENSOR_BITS_PER_PIXEL
67 #define CAM_SENSOR_BITS_PER_PIXEL 12
68 #define CAM_HOTSHOE_OVERRIDE 1
69
70 #define CAM_HAS_FILEWRITETASK_HOOK 1
71
72 #define REMOTE_SYNC_STATUS_LED 0xC0220060 // specifies an LED that turns on while camera waits for USB remote to sync
73
74 #define CAM_SD_OVER_IN_AF 1
75 #define CAM_SD_OVER_IN_AFL 1
76 #define CAM_SD_OVER_IN_MF 1
77
78 #define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works
79
80 //--------------------------------------------------
81
82 #undef CAM_DEFAULT_MENU_CURSOR_BG
83 #undef CAM_DEFAULT_MENU_CURSOR_FG
84 #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors
85 #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors