root/platform/a2300/platform_camera.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 // Camera - A2300 - platform_camera.h
   2 
   3 // This file contains the various settings values specific to the A2300 camera.
   4 // This file is referenced via the 'include/camera.h' file and should not be loaded directly.
   5 
   6 // If adding a new settings value put a suitable default in 'include/camera.h',
   7 // along with documentation on what the setting does and how to determine the correct value.
   8 // If the setting should not have a default value then add it in 'include/camera.h'
   9 // using the '#undef' directive along with appropriate documentation.
  10 
  11 // Override any default values with your camera specific values in this file. Try and avoid
  12 // having override values that are the same as the default value.
  13 
  14 // When overriding a setting value there are two cases:
  15 // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
  16 // 2. If changing the value it is best to use an '#undef' directive to remove the default value
  17 //    followed by a '#define' to set the new value.
  18 
  19 // When porting CHDK to a new camera, check the documentation in 'include/camera.h'
  20 // for information on each setting. If the default values are correct for your camera then
  21 // don't override them again in here.
  22 
  23     #define CAM_DRYOS                       1
  24     #define CAM_PROPSET                     5
  25 
  26     #define CAM_DRYOS_2_3_R39               1       // Defined for cameras with DryOS version R39 or higher
  27     #define CAM_DRYOS_2_3_R47               1       // Defined for cameras with DryOS version R47 or higher
  28 
  29     #define CAM_RAW_ROWPIX                  4704    // Found @0xff92e1c4  a2300
  30     #define CAM_RAW_ROWS                    3504    // Found @0xff92e1d0  a2300
  31 
  32     #undef  CAM_UNCACHED_BIT
  33     #define CAM_UNCACHED_BIT                0x40000000 // Found @0xff834324 a2300
  34 
  35     #define CAM_JPEG_WIDTH                  4608     
  36     #define CAM_JPEG_HEIGHT                 3456    
  37     #define CAM_ACTIVE_AREA_X1              16        //Not verified
  38     #define CAM_ACTIVE_AREA_Y1              26        //Not verified
  39     #define CAM_ACTIVE_AREA_X2              4640    //Not verified
  40     #define CAM_ACTIVE_AREA_Y2              3486    //Not verified
  41 
  42     #define CAM_DNG_LENS_INFO               { 50,10, 250,10, 28,10, 69,10 } // See comments in camera.h   a2300is
  43 
  44     #undef  CAM_SENSOR_BITS_PER_PIXEL
  45     #define CAM_SENSOR_BITS_PER_PIXEL       12
  46     
  47     #define cam_CFAPattern                  0x01000201   // [Green Blue Red Green]
  48     
  49     #define CAM_COLORMATRIX1                             \
  50     827547, 1000000, -290458, 1000000, -126086, 1000000, \
  51     -12829, 1000000,  530507, 1000000,   50537, 1000000, \
  52       5181, 1000000,   48183, 1000000,  245014, 1000000
  53       
  54     #define cam_CalibrationIlluminant1      1       // Daylight
  55 
  56     #define CAM_ZEBRA_NOBUF                 1
  57 
  58     #define PARAM_CAMERA_NAME               4       // parameter number for GetParameterData
  59 
  60     #define CAM_HAS_ND_FILTER               1
  61 
  62     #define CAM_HAS_VIDEO_BUTTON            1
  63     #undef  CAM_VIDEO_CONTROL
  64     #define CAM_VIDEO_QUALITY_ONLY          1
  65 
  66     #define CAM_DATE_FOLDER_NAMING          0x400
  67 
  68     #define CAM_DRIVE_MODE_FROM_TIMER_MODE  1
  69 
  70     #undef  CAM_HAS_IRIS_DIAPHRAGM
  71     
  72     #undef  CAM_HAS_ERASE_BUTTON
  73     
  74     #undef  CAM_HAS_IS                              // Camera does not have an image stabilizer
  75 
  76     #undef  CAM_HAS_MANUAL_FOCUS
  77     
  78     #define CAM_LOAD_CUSTOM_COLORS          1       // Enable loading CHDK colors into the camera palette memory/hardware
  79 
  80     #undef  CAM_USES_ASPECT_CORRECTION
  81     #define CAM_USES_ASPECT_CORRECTION      1
  82     #undef CAM_BITMAP_WIDTH
  83     #define CAM_BITMAP_WIDTH                720   // Actual width of bitmap screen in bytes
  84 
  85     #define  CAM_ADJUSTABLE_ALT_BUTTON      1    // ALT-button can be set from menu
  86     #define CAM_ALT_BUTTON_NAMES            { "Playback", "Help" }
  87     #define CAM_ALT_BUTTON_OPTIONS          { KEY_PRINT, KEY_HELP }
  88     #undef  CAM_HAS_DISP_BUTTON
  89 
  90     #define CAM_HAS_FILEWRITETASK_HOOK      1
  91     #define CAM_FILEWRITETASK_SEEKS         1
  92 
  93     #define CAM_NEED_SET_ZOOM_DELAY         300  // Define to add a delay after setting the zoom position
  94     #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS 1    // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom
  95     #define CAM_USE_ALT_SET_ZOOM_POINT      1    // Define to use the alternate code in lens_set_zoom_point()
  96     #define CAM_USE_ALT_PT_MoveOpticalZoomAt 1    // Define to use the PT_MoveOpticalZoomAt() function in lens_set_zoom_point()
  97 
  98     #define CAM_QUALITY_OVERRIDE            1
  99 
 100     #undef  CAM_USB_EVENTID
 101     #define CAM_USB_EVENTID                 0x202   // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
 102     #define CAM_MISSING_RAND                1    // srand()/rand() functions not found in firmware. If defined, CHDK use functions implemented in C
 103     #define MKDIR_RETURN_ONE_ON_SUCCESS     1    // mkdir() return 1 on success, 0 on fail.
 104 
 105 //    #define REMOTE_SYNC_STATUS_LED     0xC0223030        // TODO specifies an LED that turns on while camera waits for USB remote to sync
 106  
 107     #define CAM_SD_OVER_IN_AF               1
 108     #define CAM_SD_OVER_IN_MF               1
 109  
 110 //--------------------------------------------------

/* [<][>][^][v][top][bottom][index][help] */